References
- J.M. Wernik and S.A. Meguid, Multiscale micromechanical modeling of the constitutive response of carbon nanotube-reinforced structural adhesives, Int. J. Solids Struct., vol. 51, no. 14, pp. 2575–2589, 2014. DOI: https://doi.org/10.1016/j.ijsolstr.2014.03.009.
- S.I. Yengejeh, S.A. Kazemi, and A. Öchsner, Carbon nanotubes as reinforcement in composites: A review of the analytical, numerical and experimental approaches, Comput. Mater. Sci., vol. 136, pp. 85–101, 2017. DOI: https://doi.org/10.1016/j.commatsci.2017.04.023.
- Q.H. Zeng, A.B. Yu, and G.Q. Lu, Multiscale modeling and simulation of polymer nanocomposites, Prog. Polym. Sci., vol. 33, no. 2, pp. 191–269, 2008. DOI: https://doi.org/10.1016/j.progpolymsci.2007.09.002.
- H.R. Lusti and A.A. Gusev, Finite element predictions for the thermoelastic properties of nanotube reinforced polymers, Modelling Simul. Mater. Sci. Eng., vol. 12, no. 3, pp. S107–S119, 2004. DOI: https://doi.org/10.1088/0965-0393/12/3/S05.
- K.I. Tserpes and A. Chanteli, Parametric numerical evaluation of the effective elastic properties of carbon nanotube-reinforced polymers, Compos. Struct., vol. 99, pp. 366–374, 2013. DOI: https://doi.org/10.1016/j.compstruct.2012.12.004.
- E. Garcia-Macias, C.F. Guzman, E.I. Saavedra Flores, and R. Castro-Triguero, Multiscale modeling of the elastic moduli of CNT-reinforced polymers and fitting of efficiency parameters for the use of the extended rule-of-mixtures, Compos. Part B-Eng., vol. 159, pp. 114–131, 2019. DOI: https://doi.org/10.1016/j.compositesb.2018.09.057.
- J.F. Wang, and K.M. Liew, On the study of elastic properties of CNT-reinforced composites based on element-free MLS method with nanoscale cylindrical representative volume element, Compos. Struct., vol. 124, pp. 1–9, 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.01.006.
- P. Joshi, and S.H. Upadhyay, Evaluation of elastic properties of multi walled carbon nanotube reinforced composite, Comput. Mater. Sci., vol. 81, pp. 332–338, 2014. DOI: https://doi.org/10.1016/j.commatsci.2013.08.034.
- M.J. Shahzad Zuberi and V. Esat, Investigating the mechanical properties of single walled carbon nanotube reinforced epoxy composite through finite element modelling, Compos. Part B-Eng., vol. 71, pp. 1–9, 2015. DOI: https://doi.org/10.1016/j.compositesb.2014.11.020.
- P. Kumar and J. Srinivas, Numerical evaluation of effective elastic properties of CNT-reinforced polymers for interphase effects, Comput. Mater. Sci., vol. 88, pp. 139–144, 2014. DOI: https://doi.org/10.1016/j.commatsci.2014.03.002.
- K.P. Babu, P.M. Mohite, and C.S. Upadhyay, Development of an RVE and its stiffness predictions based on mathematical homogenization theory for short fibre composites, Int. J. Solids Struct., vol. 130–131, pp. 80–104, 2018. DOI: https://doi.org/10.1016/j.ijsolstr.2017.10.011.
- A. Greco and A. Maffezzoli, Two-dimensional and three-dimensional simulation of diffusion in nanocomposite with arbitrarily oriented lamellae, J. Membr. Sci., vol. 442, pp. 238–244, 2013. DOI: https://doi.org/10.1016/j.memsci.2013.04.038.
- A. Greco, Numerical simulation and mathematical modeling of 2D multi-scale diffusion in lamellar nanocomposite, Comput. Mater. Sci., vol. 90, pp. 203–209, 2014. DOI: https://doi.org/10.1016/j.commatsci.2014.04.017.
- A. Greco, Simulation and modeling of diffusion in oriented lamellar nanocomposites, Comput. Mater. Sci., vol. 83, pp. 164–170, 2014. DOI: https://doi.org/10.1016/j.commatsci.2013.11.019.
- A. Greco and A. Maffezzoli, Finite element modeling of multiscale diffusion in intercalated nanocomposites, J. Nanomater., vol. 2015, pp. 1–11, 2015. DOI: https://doi.org/10.1155/2015/482698.
- A. Greco and A. Maffezzoli, Finite element simulation and analytical modeling of 3D multi scale diffusion in nanocomposites with permeable stacks, Modelling Simul. Mater. Sci. Eng., vol. 24, no. 1, pp. 015003, 2016. DOI: https://doi.org/10.1088/0965-0393/24/1/015003.
- A. Greco, C. Esposito Corcione, and A. Maffezzoli, Effect of multi scale diffusion on the permeability behaviour of intercalated nanocomposites, J. Membr. Sci., vol. 505, pp. 92–99, 2016. DOI: https://doi.org/10.1016/j.memsci.2016.01.029.
- A. Greco, FEM analysis of the elastic behavior of composites and nanocomposites with arbitrarily oriented reinforcements, Compos. Struct., vol. 241, pp. 112095, 2020. DOI: https://doi.org/10.1016/j.compstruct.2020.112095.
- F.H. Gojny, M.H.G. Wichmann, U. Kopke, B. Fiedler, and K. Schulte, Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content, Compos. Sci. Technol., vol. 64, no. 15, pp. 2363–2371, 2004. DOI: https://doi.org/10.1016/j.compscitech.2004.04.002.
- K. Baek, H. Shin, T. Yoo, and M. Cho, Two-step multiscale homogenization for mechanical behaviour of polymeric nanocomposites with nanoparticulate agglomerations, Compos. Sci. Technol., vol. 179, pp. 97–105, 2019. DOI: https://doi.org/10.1016/j.compscitech.2019.05.006.
- H. Shin, K. Baek, J.G. Han, and M. Cho, Homogenization analysis of polymeric nanocomposites containing nanoparticulate clusters, Compos. Sci. Technol., vol. 138, pp. 217–224, 2017. DOI: https://doi.org/10.1016/j.compscitech.2016.11.021.
- R.D. Peng, H.W. Zhou, H.W. Wang, and L. Mishnaevsky, Jr. Modeling of nano-reinforced polymer composites: Microstructure effect on Young’s modulus, Comput. Mater. Sci., vol. 60, pp. 19–31, 2012. DOI: https://doi.org/10.1016/j.commatsci.2012.03.010.
- H.W. Wang, H.W. Zhou, R.D. Peng, and L. Mishnaevsky, Jr. Nanoreinforced polymer composites: 3D FEM modeling with effective interface concept, Compos. Sci. Technol., vol. 71, no. 7, pp. 980–988, 2011. DOI: https://doi.org/10.1016/j.compscitech.2011.03.003.
- V.A. Buryachenko, A. Roy, K. Lafdi, K.L. Anderson, and S. Chellapilla, Multi-scale mechanics of nanocomposites including interface: Experimental and numerical investigation, Compos. Sci. Technol., vol. 65, no. 15-16, pp. 2435–2465, 2005. DOI: https://doi.org/10.1016/j.compscitech.2005.08.005.
- R. Guzman de Villoria, and A. Miravete, Mechanical model to evaluate the effect of the dispersion in nanocomposites, Acta Mater., vol. 55, no. 9, pp. 3025–3031, 2007. DOI: https://doi.org/10.1016/j.actamat.2007.01.007.
- M. Javadinejad, M. Mashayekhi, M. Karevan, and H. Hadavinia, Using the equivalent fiber approach in two-scale modeling of the elastic behavior of carbon nanotube/epoxy nanocomposite, Nanomaterials, vol. 8, no. 9, pp. 696, 2018. DOI: https://doi.org/10.3390/nano8090696.
- P.S. Goh, A.F. Ismail, and B.C. Ng, Directional alignment of carbon nanotubes in polymer matrices: Contemporary approaches and future advances, Compos. Part A-Appl. Sci. Manuf., vol. 56, pp. 103–126, 2014. DOI: https://doi.org/10.1016/j.compositesa.2013.10.001.
- D.W. Schaefer and R.S. Justice, How nano are nanocomposites? Macromolecules, vol. 40, no. 24, pp. 8501–8517, 2007. DOI: https://doi.org/10.1021/ma070356w.
- S. Rooj, A. Das, K.W. Stöckelhuber, S. Wießner, D. Fischer, U. Reuter, and G. Heinrich, Expanded organoclay’ assisted dispersion and simultaneous structural alterations of multiwall carbon nanotube (MWCNT) clusters in natural rubber, Compos. Sci. Technol., vol. 107, pp. 36–43, 2015. DOI: https://doi.org/10.1016/j.compscitech.2014.11.018.
- D. Moon, J. Obrzut, J.F. Douglas, T. Lam, K.K. Koziol, and K.B. Migler, Three dimensional cluster distributions in processed multi-wall carbon nanotube polymer composites, Polymer, vol. 55, no. 15, pp. 3270–3277, 2014. DOI: https://doi.org/10.1016/j.polymer.2014.05.022.
- M.V. Jose, D. Dean, J. Tyner, G. Price, and E. Nyairo, Polypropylene/carbon nanotube nanocomposite fibers: Process–morphology–property relationships, J. Appl. Polym. Sci., vol. 103, no. 6, pp. 3844–3850, 2007. DOI: https://doi.org/10.1002/app.25475.
- R.M. Jones, Mechanics of Composite Materials, 2nd edn., Taylor & Francis, Philadelphia, 1999.
- F. Tornabene, M. Bacciocchi, N. Fantuzzi, and J.N. Reddy, Multiscale approach for three-phase CNT/polymer/fiber laminated nanocomposite structures, Polym. Compos., vol. 40, no. S1, pp. E102–E126, 2019. DOI: https://doi.org/10.1002/pc.24520.
- Z. Luo, X. Li, J. Shang, H. Zhu, and D. Fang, Modified rule of mixtures and Halpin–Tsai model for prediction of tensile strength of micron-sized reinforced composites and Young’s modulus of multiscale reinforced composites for direct extrusion fabrication, Adv. Mech. Eng., vol. 10, no. 7, pp. 168781401878528–168781401878510, 2018. DOI: https://doi.org/10.1177/1687814018785286.
- V.S. Romanov, S.V. Lomov, I. Verpoest, and L. Gorbatikh, Stress magnification due to carbon nanotube agglomeration in composites, Compos. Struct., vol. 133, pp. 246–256, 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.07.069.
- S. Mortazavian and A. Fatemi, Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites, Compos. Part B-Eng., vol. 72, pp. 116–129, 2015. DOI: https://doi.org/10.1016/j.compositesb.2014.11.041.