References
- S. Cheng, and N. Al-Rubayi, Elastic stability of orthotropic sandwich plates developments in mechanics, Developments in Mechanics, vol. 5, pp. 273–296, 1969.
- V. Kovarik, Shear instability of sandwich plates with rigid cores, Acta Tech CSAV (Ceskoslovensk Akademie Ved)., vol. 16, no. 3, pp. 343–388, 1971.
- R. D. Cook, Finite element buckling analysis of homogeneous and sandwich plates, Int. J. Numer. Meth. Eng., vol. 9, no. 1, pp. 39–50, 1975. DOI: https://doi.org/10.1002/nme.1620090104.
- H. C. Chan, and O. Foo, Buckling of multi-layer sandwich plates by the finite strip method, Int. J. Mech. Sci., vol. 19, no. 8, pp. 447–456, 1977. DOI: https://doi.org/10.1016/0020-7403(77)90018-2.
- C. S. Smith, Application of folded plate analysis to bending, buckling and vibration of multilayer orthotropic sandwich beams and panels, Comput. Struct., vol. 22, no. 3, pp. 491–497, 1986. DOI: https://doi.org/10.1016/0045-7949(86)90055-6.
- P. Minguet, J. Dugundji, and P. A. Lagace, Buckling and failure of sandwich plates with graphite-epoxy faces and various cores, J Aircraft., vol. 25, no. 4, pp. 372–379, 1988. DOI: https://doi.org/10.2514/3.45573.
- N. Li, and S. Mirza, Buckling analysis of clamped sandwich plates by the reciprocal theorem method, Comput. Struct., vol. 51, no. 2, pp. 137–141, 1994. DOI: https://doi.org/10.1016/0045-7949(94)90044-2.
- V. N. Paimushin, A. I. Golovanov, and S. N. Bobrov, Methods of finite element analysis of arbitrary buckling forms of sandwich plates and shells, Mech. Compos. Mater., vol. 36, no. 4, pp. 277–286, 2000. DOI: https://doi.org/10.1007/BF02262806.
- C. S. Babu, and T. Kant, Refined higher order finite element models for thermal buckling of laminated composite and sandwich plates, J. Therm. Stresses., vol. 23, no. 2, pp. 111–130, 2000.
- O. Polit, and M. Touratier, High-order triangular sandwich plate finite element for linear and non-linear analyses, Comput. Methods Appl. Mech. Eng., vol. 185, no. 2-4, pp. 305–324, 2000. DOI: https://doi.org/10.1016/S0045-7825(99)00264-9.
- J. B. Dafedar, Y. M. Desai, and A. A. Mufti, Stability of sandwich plates by mixed, higher-order analytical formulation, Int. J. Solids Struct., vol. 40, no. 17, pp. 4501–4517, 2003. DOI: https://doi.org/10.1016/S0020-7683(03)00283-X.
- L. Shiau, and S. Kuo, Thermal buckling of composite sandwich plates, Mech. Based Des. Struct. Mach., vol. 32, no. 1, pp. 57–72, 2004. DOI: https://doi.org/10.1081/SME-120026590.
- H. Matsunaga, Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory, Compos. Struct., vol. 68, no. 4, pp. 439–454, 2005. DOI: https://doi.org/10.1016/j.compstruct.2004.04.010.
- R. J. Mania, Buckling analysis of trapezoidal composite sandwich plate subjected to in-plane compression, Compos. Struct., vol. 69, no. 4, pp. 482–490, 2005. DOI: https://doi.org/10.1016/j.compstruct.2004.08.005.
- Y. V. Kokhanenko, Numerical solution to the buckling problem for a sandwich plate under uniaxial compression, Int. Appl. Mech., vol. 42, no. 9, pp. 1045–1051, 2006. DOI: https://doi.org/10.1007/s10778-006-0175-z.
- M. K. Pandit, B. N. Singh, and A. H. Sheikh, Buckling of laminated sandwich plates with soft core based on an improved higher order zigzag theory, Thin-Walled Struct., vol. 46, no. 11, pp. 1183–1191, 2008. DOI: https://doi.org/10.1016/j.tws.2008.03.002.
- M. K. Pandit, B. N. Singh, and A. H. Sheikh, Buckling of sandwich plates with random material properties using improved plate model, AIAA J., vol. 47, no. 2, pp. 418–428, 2009. DOI: https://doi.org/10.2514/1.39180.
- M. M. Kheirikhah, S. M. Khalili, and K. M. Fard, Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory, Eur. J. Mech. A-Solids., vol. 31, no. 1, pp. 54–66, 2012. DOI: https://doi.org/10.1016/j.euromechsol.2011.07.003.
- X. Liu, G. Du, and X. Niu, A neural network methord applied in prediction eigenvalue buckling for sandwich plates, Inf Technol J., vol. 12, no. 24, pp. 8129–8134, 2013.
- A. V. Lopatin, and E. V. Morozov, Buckling of a uniformly compressed rectangular SSCF composite sandwich plate, Compos. Struct., vol. 105, pp. 108–115, 2013. DOI: https://doi.org/10.1016/j.compstruct.2013.04.036.
- A. Ranjbaran, M. R. Khoshravan, and M. Kharazi, Buckling analysis of sandwich plate using layerwise theory, J. Mech. Sci. Technol., vol. 28, no. 7, pp. 2769–2777, 2014. DOI: https://doi.org/10.1007/s12206-014-0512-9.
- S. Sarangan, and B. N. Singh, Higher-order closed-form solution for the analysis of laminated composite and sandwich plates based on new shear deformation theories, Compos. Struct., vol. 138, pp. 391–403, 2016. DOI: https://doi.org/10.1016/j.compstruct.2015.11.049.
- R. Vescovini, M. Dottavio, L. Dozio, and O. Polit, Thermal buckling response of laminated and sandwich plates using refined 2-D models, Compos. Struct., vol. 176, pp. 313–328, 2017. DOI: https://doi.org/10.1016/j.compstruct.2017.05.021.
- F. Li, B. Han, Q. Zhang, F. Jin, and T. J. Lu, Buckling of a standing corrugated sandwich plate subjected to body force and terminal load, Thin-Walled Struct., vol. 127, pp. 688–699, 2018. DOI: https://doi.org/10.1016/j.tws.2018.03.013.
- E. Magnuckablandzi, K. Wiśniewskamleczko, and M. J. Smyczynski, Buckling of symmetrical circular sandwich plates with variable mechanical properties of the core in the radial direction, Compos. Struct., vol. 204, pp. 88–94, 2018.
- R. R. Kumar, T. Mukhopadhyay, K. M. Pandey, and S. Dey, Stochastic buckling analysis of sandwich plates: The importance of higher order modes, Int. J. Mech. Sci., vol. 152, pp. 630–643, 2019. DOI: https://doi.org/10.1016/j.ijmecsci.2018.12.016.
- Q. Jin, and W. Yao, An accurate zigzag theory for bending and buckling analysis of thick laminated sandwich plates with soft core, J. Compos. Mater., vol. 54, no. 18, pp. 2473–2488, 2020. DOI: https://doi.org/10.1177/0021998319899138.
- P. Kumar, and C. V. Srinivasa, On buckling and free vibration studies of sandwich plates and cylindrical shells: A review, J. Thermoplast. Compos. Mater., vol. 33, no. 5, pp. 673–724, 2020. DOI: https://doi.org/10.1177/0892705718809810.
- X. Xu, and H. Yang, Vision measurement of tunnel structures with robust modelling and deep learning algorithms, Sensors., vol. 20, no. 17, pp. 4945, 2020. DOI: https://doi.org/10.3390/s20174945.
- X. Xu, J. Bureick, H. Yang, and I. Neumann, TLS-based composite structure deformation analysis validated with laser tracker, Compos. Struct., vol. 202, pp. 60–65, 2018. DOI: https://doi.org/10.1016/j.compstruct.2017.10.015.
- X. Xu, H. Yang, Y. Zhang, and I. Neumann, Intelligent 3D data extraction method for deformation analysis of composite structures, Compos. Struct., vol. 203, pp. 254–258, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.07.003.
- X. Xu, R. Augello, and H. Yang, The generation and validation of a CUF-based FEA model with laser-based experiments, Mech. Adv. Mater. Struct., 2019. DOI: https://doi.org/10.1080/15376494.2019.1697473.
- X. Xu, N. Fallahi, and H. Yang, Efficient CUF-based FEM analysis of thin-wall structures with Lagrange polynomial expansion, Mech. Adv. Mater. Struct., 2020. DOI: https://doi.org/10.1080/15376494.2020.1818331.
- A. M. Zenkour, A comprehensive analysis of functionally graded sandwich plates: Part 2-Buckling and free vibration, Int. J. Solids Struct., vol. 42, no. 18-19, pp. 5243–5258, 2005. DOI: https://doi.org/10.1016/j.ijsolstr.2005.02.016.
- H. Shen, and S. Li, Postbuckling of sandwich plates with FGM face sheets and temperature-dependent properties, Compos. Part B-Eng., vol. 39, no. 2, pp. 332–344, 2008. DOI: https://doi.org/10.1016/j.compositesb.2007.01.004.
- S. K. Jalali, M. H. Naei, and A. Poorsolhjouy, Thermal stability analysis of circular functionally graded sandwich plates of variable thickness using pseudo-spectral method, Mater. Des., vol. 31, no. 10, pp. 4755–4763, 2010. DOI: https://doi.org/10.1016/j.matdes.2010.05.009.
- A. M. Zenkour, and M. Sobhy, Thermal buckling of various types of FGM sandwich plates, Compos. Struct., vol. 93, no. 1, pp. 93–102, 2010. DOI: https://doi.org/10.1016/j.compstruct.2010.06.012.
- S. K. Jalali, M. H. Naei, and A. Poorsolhjouy, Buckling of circular sandwich plates of variable core thickness and FGM face sheets, Int. J. Str. Stab. Dyn., vol. 11, no. 02, pp. 273–295, 2011. DOI: https://doi.org/10.1142/S0219455411004099.
- M. Bourada, A. Tounsi, M. S. Houari, and E. A. Bedia, A new four-variable refined plate theory for thermal buckling analysis of functionally graded sandwich plates, J. Sandwich Struct. Mater., vol. 14, no. 1, pp. 5–33, 2012. DOI: https://doi.org/10.1177/1099636211426386.
- F. Z. Kettaf, M. S. Houari, M. Benguediab, and A. Tounsi, Thermal buckling of functionally graded sandwich plates using a new hyperbolic shear displacement model, Steel Compos. Struct., vol. 15, no. 4, pp. 399–423, 2013. DOI: https://doi.org/10.12989/scs.2013.15.4.399.
- F. A. Fazzolari, and E. Carrera, Thermal stability of FGM sandwich plates under various through-the-thickness temperature distributions, J. Therm. Stresses, vol. 37, no. 12, pp. 1449–1481, 2014. DOI: https://doi.org/10.1080/01495739.2014.937251.
- Z. Abdelhak, L. Hadji, Z. Khelifa, T. H. Daouadji, and E. A. Bedia, Analysis of buckling response of functionally graded sandwich plates using a refined shear deformation theory, Wind Struct., vol. 22, no. 3, pp. 291–305, 2016. DOI: https://doi.org/10.12989/was.2016.22.3.291.
- S. K. Jalali, and M. Heshmati, Buckling analysis of circular sandwich plates with tapered cores and functionally graded carbon nanotubes-reinforced composite face sheets, Thin-Walled Struct., vol. 100, pp. 14–24, 2016. DOI: https://doi.org/10.1016/j.tws.2015.12.001.
- F. A. Fazzolari, Stability analysis of FGM sandwich plates by using variable-kinematics Ritz models, Mech. Adv. Mater. Struct., vol. 23, no. 9, pp. 1104–1113, 2016. DOI: https://doi.org/10.1080/15376494.2015.1121559.
- A. M. Neves, et al., Influence of zig-zag and warping effects on buckling of functionally graded sandwich plates according to sinusoidal shear deformation theories, Mech. Adv. Mater. Struct., vol. 24, no. 5, pp. 360–376, 2017. DOI: https://doi.org/10.1080/15376494.2016.1191095.
- S. R. Mahmoud, and A. Tounsi, A new shear deformation plate theory with stretching effect for buckling analysis of functionally graded sandwich plates, Steel Compos. Struct., vol. 24, no. 5, pp. 569–578, 2017.
- A. A. Daikh, and A. Megueni, Thermal buckling analysis of functionally graded sandwich plates, J. Therm. Stresses., vol. 41, no. 2, pp. 139–159, 2018. DOI: https://doi.org/10.1080/01495739.2017.1393644.
- C. H. Thai, A. J. Ferreira, M. A. Wahab, and H. Nguyenxuan, A moving Kriging meshfree method with naturally stabilized nodal integration for analysis of functionally graded material sandwich plates, Acta Mech., vol. 229, no. 7, pp. 2997–3023, 2018. DOI: https://doi.org/10.1007/s00707-018-2156-9.
- S. C. Chikr, A. Kaci, R. Yeghnem, and A. Tounsi, A new higher-order shear and normal deformation theory for the buckling analysis of new type of FGM sandwich plates, Struct. Eng. Mech., vol. 72, no. 5, pp. 653–673, 2019.
- C. Li, H. Shen, and H. Wang, Postbuckling behavior of sandwich plates with functionally graded auxetic 3D lattice core, Compos. Struct., vol. 237, pp. 111894, 2020. DOI: https://doi.org/10.1016/j.compstruct.2020.111894.
- C. Song, and J. P. Wolf, The scaled boundary finite-element method-alias consistent infinitesimal finite-element cell method-for elastodynamics, Comput. Methods Appl. Mech. Eng., vol. 147, no. 3-4, pp. 329–355, 1997. DOI: https://doi.org/10.1016/S0045-7825(97)00021-2.
- H. Gravenkamp, S. Natarajan, and W. Dornisch, On the use of NURBS-based discretizations in the scaled boundary finite element method for wave propagation problems, Comput. Methods Appl. Mech. Eng., vol. 315, pp. 867–880, 2017. DOI: https://doi.org/10.1016/j.cma.2016.11.030.
- H. Gravenkamp, A. A. Saputra, C. Song, and C. Birk, Efficient wave propagation simulation on quadtree meshes using SBFEM with reduced modal basis, Int. J. Numer. Meth. Engng. ., vol. 110, no. 12, pp. 1119–1141, 2017. DOI: https://doi.org/10.1002/nme.5445.
- L. Liu, J. Zhang, C. Song, K. He, A. A. Saputra, and W. Gao, Automatic scaled boundary finite element method for three-dimensional elastoplastic analysis, Int. J. Mech. Sci., vol. 171, pp. 105374, 2020. DOI: https://doi.org/10.1016/j.ijmecsci.2019.105374.
- H. Gravenkamp, C. Birk, and C. Song, Simulation of elastic guided waves interacting with defects in arbitrarily long structures using the scaled boundary finite element method, Comput. Phys., vol. 295, pp. 438–455, 2015. DOI: https://doi.org/10.1016/j.jcp.2015.04.032.
- A. Deeks, and L. Cheng, Potential flow around obstacles using the scaled boundary finite-element method, Int. J. Numer. Meth. Fluids., vol. 41, no. 7, pp. 721–741, 2003. DOI: https://doi.org/10.1002/fld.468.
- B. Li, L. Cheng, A. Deeks, and B. Teng, A modified scaled boundary finite-element method for problems with parallel side-faces, part I. Theoretical developments. Appl. Ocean Res., vol. 27, no. 4-5, pp. 216–223, 2005. DOI: https://doi.org/10.1016/j.apor.2005.11.008.
- B. Li, L. Cheng, A. Deeks, and B. Teng, A modified scaled boundary finite-element method for problems with parallel side-faces. Part II. Application and evaluation, Appl. Ocean Res., vol. 27, no. 4-5, pp. 224–234, 2005. DOI: https://doi.org/10.1016/j.apor.2005.11.007.
- W. Wang, Z. Guo, Y. Peng, and Q. Zhang, A numerical study of the effects of the T-shaped baffles on liquid sloshing in horizontal elliptical tanks, Ocean Eng., vol. 111, pp. 543–568, 2016. DOI: https://doi.org/10.1016/j.oceaneng.2015.11.020.
- W. Wang, Y. Peng, Q. Zhang, L. Ren, and Y. Jiang, Sloshing of liquid in partially liquid filled toroidal tank with various baffles under lateral excitation, Ocean Eng., vol. 146, pp. 434–456, 2017. DOI: https://doi.org/10.1016/j.oceaneng.2017.09.032.
- W. Wang, Y. Peng, Y. Zhou, and Q. Zhang, Liquid sloshing in partly-filled laterally-excited cylindrical tanks equipped with multi baffles, Appl. Ocean Res., vol. 59, pp. 543–563, 2016. DOI: https://doi.org/10.1016/j.apor.2016.07.009.
- W. Wang, Q. Zhang, Q. Ma, and L. Ren, Sloshing effects under longitudinal excitation in horizontal elliptical cylindrical containers with complex baffles, J. Waterway, Port, Coastal Ocean Eng., vol. 144, no. 2, pp. 04017044, 2018. DOI: https://doi.org/10.1061/(ASCE)WW.1943-5460.0000433.
- W. Wang, G. Tang, X. Song, and Y. Zhou, Transient sloshing in partially filled laterally excited horizontal elliptical vessels with T-shaped baffles, J. Pressure Vessel Technol., vol. 139, no. 2, pp. 021302, 2017. DOI: https://doi.org/10.1115/1.4034148.
- M. Bazyar, and A. Talebi, Scaled boundary finite-element method for solving non-homogeneous anisotropic heat conduction problems, Appl. Math. Modell, vol. 39, no. 23-24, pp. 7583–7599, 2015. DOI: https://doi.org/10.1016/j.apm.2015.03.024.
- Y. He, J. Guo, and H. Yang, Image-based numerical prediction for effective thermal conductivity of heterogeneous materials: A quadtree based scaled boundary finite element method, Int. J. Heat Mass Transf., vol. 128, pp. 335–343, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.099.
- F. Wang, G. Lin, Y. Zhou, and D. Chen, Element-free Galerkin scaled boundary method based on moving Kriging interpolation for steady heat conduction analysis, Eng. Anal. Boundary Elem., vol. 106, pp. 440–451, 2019. DOI: https://doi.org/10.1016/j.enganabound.2019.05.027.
- A. Johari, and A. Heydari, Reliability analysis of seepage using an applicable procedure based on stochastic scaled boundary finite element method, Eng. Anal. Boundary Elem., vol. 94, pp. 44–59, 2018. DOI: https://doi.org/10.1016/j.enganabound.2018.05.015.
- J. Liu, J. Li, P. Li, G. Lin, T. Xu, and L. Chen, New application of the isogeometric boundary representations methodology with SBFEM to seepage problems in complex domains, Comput. Fluids, vol. 174, pp. 241–255, 2018. DOI: https://doi.org/10.1016/j.compfluid.2018.08.004.
- Hirshikesh, A. L. Pramod, R. K. Annabattula, E. T. Ooi, C. Song, and S. Natarajan, Adaptive phase-field modeling of brittle fracture using the scaled boundary finite element method, Comput Methods Appl Mech Eng., vol. 355, pp. 284–307, 2019. DOI: https://doi.org/10.1016/j.cma.2019.06.002.
- E. T. Ooi, S. Natarajan, C. Song, and E. H. Ooi, Dynamic fracture simulations using the scaled boundary finite element method on hybrid polygon–quadtree meshes, Int. J. Impact Eng., vol. 90, pp. 154–164, 2016. DOI: https://doi.org/10.1016/j.ijimpeng.2015.10.016.
- A. A. Saputra, C. Birk, and C. Song, Computation of three-dimensional fracture parameters at interface cracks and notches by the scaled boundary finite element method, Eng. Fract. Mech., vol. 148, pp. 213–242, 2015. DOI: https://doi.org/10.1016/j.engfracmech.2015.09.006.
- C. Song, E. T. Ooi, and S. Natarajan, A review of the scaled boundary finite element method for two-dimensional linear elastic fracture mechanics, Eng. Fract. Mech., vol. 187, pp. 45–73, 2018. DOI: https://doi.org/10.1016/j.engfracmech.2017.10.016.
- Z. Yang, A. Deeks, and H. Hao, Transient dynamic fracture analysis using scaled boundary finite element method: a frequency-domain approach, Eng. Fract. Mech., vol. 74, no. 5, pp. 669–687, 2007. DOI: https://doi.org/10.1016/j.engfracmech.2006.06.018.
- J. D. Jung, and W. Becker, Semi-analytical modeling of composite beams using the scaled boundary finite element method, Compos. Struct., vol. 137, pp. 121–129, 2016. DOI: https://doi.org/10.1016/j.compstruct.2015.11.021.
- J. Li, Z. Shi, and S. Ning, A two-dimensional consistent approach for static and dynamic analyses of uniform beams, Eng. Anal. Boundary Elem., vol. 82, pp. 1–16, 2017. DOI: https://doi.org/10.1016/j.enganabound.2017.05.009.
- S. Dolling, J. Hahn, J. Felger, S. Bremm, and W. Becker, A scaled boundary finite element method model for interlaminar failure in composite laminates, Compos. Struct., vol. 241, pp. 111865, 2020. DOI: https://doi.org/10.1016/j.compstruct.2020.111865.
- N. Garg, N. D. Chakladar, B. G. Prusty, C. Song, and A. W. Phillips, Modelling of laminated composite plates with weakly bonded interfaces using scaled boundary finite element method, Int. J. Mech. Sci., vol. 170, pp. 105349, 2020. DOI: https://doi.org/10.1016/j.ijmecsci.2019.105349.
- G. Lin, P. Zhang, J. Liu, and J. Li, Analysis of laminated composite and sandwich plates based on the scaled boundary finite element method, Compos. Struct., vol. 187, pp. 579–592, 2018. DOI: https://doi.org/10.1016/j.compstruct.2017.11.001.
- H. Man, C. Song, W. Gao, and F. Tin-Loi, A unified 3D-based technique for plate bending analysis using scaled boundary finite element method, Int. J. Numer. Meth. Eng., vol. 91, no. 5, pp. 491–515, 2012. DOI: https://doi.org/10.1002/nme.4280.
- H. Man, C. Song, T. Xiang, W. Gao, and F. Tin-Loi, High-order plate bending analysis based on the scaled boundary finite element method, Int. J. Numer. Meth. Eng., vol. 95, no. 4, pp. 331–360, 2013. DOI: https://doi.org/10.1002/nme.4519.
- H. Man, C. Song, W. Gao, and F. Tin-Loi, Semi-analytical analysis for piezoelectric plate using the scaled boundary finite-element method, Comput. Struct., vol. 137, pp. 47–62, 2014. DOI: https://doi.org/10.1016/j.compstruc.2013.10.005.
- J. Li, Z. Shi, and L. Liu, A scaled boundary finite element method for static and dynamic analyses of cylindrical shells, Eng. Anal. Boundary Elem., vol. 98, pp. 217–231, 2019. DOI: https://doi.org/10.1016/j.enganabound.2018.10.024.
- M. Wallner, C. Birk, and H. Gravenkamp, A scaled boundary finite element approach for shell analysis, Comput. Methods Appl. Mech. Eng., vol. 361, pp. 112807, 2020. DOI: https://doi.org/10.1016/j.cma.2019.112807.
- W. Ye, J. Liu, Q. Zang, and G. Lin, Magneto-electro-elastic semi-analytical models for free vibration and transient dynamic responses of composite cylindrical shell structures, Mech. Mater., vol. 148, pp. 103495, 2020. DOI: https://doi.org/10.1016/j.mechmat.2020.103495.
- K. Chen, D. Zou, and X. Kong, A nonlinear approach for the three-dimensional polyhedron scaled boundary finite element method and its verification using Koyna gravity dam, Soil Dyn. Earthquake Eng., vol. 96, pp. 1–12, 2017. DOI: https://doi.org/10.1016/j.soildyn.2017.01.028.
- J. Doherty, and A. Deeks, Adaptive coupling of the finite-element and scaled boundary finite-element methods for non-linear analysis of unbounded media, Comput. Geotech., vol. 32, no. 6, pp. 436–444, 2005. DOI: https://doi.org/10.1016/j.compgeo.2005.07.001.
- M. A. Hassanen, and A. Elhamalawi, Two-dimensional development of the dynamic coupled consolidation scaled boundary finite-element method for fully saturated soils, Soil Dyn. Earthquake Eng., vol. 27, no. 2, pp. 153–165, 2007. DOI: https://doi.org/10.1016/j.soildyn.2006.05.003.
- D. Zou, X. Teng, K. Chen, and X. Yu, An extended polygon scaled boundary finite element method for the nonlinear dynamic analysis of saturated soil, Eng. Anal. Boundary Elem., vol. 91, pp. 150–161, 2018. DOI: https://doi.org/10.1016/j.enganabound.2018.03.019.
- Y. Alireza, and M. K. Jean, Estimation of Natural periods of Earth Dam-Flexible canyon systems with 3D coupled FEM-SBFEM, Comput. Geotech, vol. 123, pp. 103546, 2020.
- Y. Qu, D. Zou, X. Kong, X. Yu, and K. Chen, Seismic cracking evolution for anti-seepage face slabs in concrete faced rockfill dams based on cohesive zone model in explicit SBFEM-FEM frame, Soil Dyn. Earthquake Eng., vol. 133, pp. 106106, 2020. DOI: https://doi.org/10.1016/j.soildyn.2020.106106.
- H. Zhong, H. Li, E. T. Ooi, and C. Song, Hydraulic fracture at the dam-foundation interface using the scaled boundary finite element method coupled with the cohesive crack model, Eng. Anal. Boundary Elem., vol. 88, pp. 41–53, 2018. DOI: https://doi.org/10.1016/j.enganabound.2017.11.009.
- J. N. Reddy, Analysis of functionally graded plates, Int. J. Numer. Meth. Eng., vol. 47, no. 1-3, pp. 663–684, 2000. DOI: https://doi.org/10.1002/(SICI)1097-0207(20000110/30)47:1/3<663::AID-NME787>3.0.CO;2-8.
- N. E. Meiche, A. Tounsi, N. Ziane, I. Mechab, and E. A. A. Adda.Bedia, New hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate, Int. J. Mech. Sci., vol. 53, no. 4, pp. 237–247, 2011. DOI: https://doi.org/10.1016/j.ijmecsci.2011.01.004.
- A. M. A. Neve, A. J. M. Ferreira, E. Carrera, M. Cinefra,C. M. C. Roque, R. M. N. Jorge, C. M. M. Soares, Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique, Compos. Part B., vol. 44, no. 1, pp. 657–674, 2013. DOI: https://doi.org/10.1016/j.compositesb.2012.01.089.
- H. Thai, T. Nguyen, T. P. Vo, and J. Lee, Analysis of functionally graded sandwich plates using a new first-order shear deformation theory, Eur. J Mech. A/Solids., vol. 45, pp. 211–225, 2014. DOI: https://doi.org/10.1016/j.euromechsol.2013.12.008.
- K. T. Nguyen, T. H. Thai, and T. P. Vo, A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates, Steel Compos. Struct., vol. 18, no. 1, pp. 91–120, 2015. DOI: https://doi.org/10.12989/scs.2015.18.1.091.
- J. L. Mantari, and J. C. Monge, Buckling, free vibration and bending analysis of functionally graded sandwich plates based on an optimized hyperbolic unified formulation, Int. J. Mech. Sci., vol. 119, pp. 170–186, 2016. DOI: https://doi.org/10.1016/j.ijmecsci.2016.10.015.
- H. Thai, T. Nguyen, T. P. Vo, and H. Nguyen-Xuan, An improved moving Kriging-based meshfree method for static, dynamic and buckling analyses of functionally graded isotropic and sandwich plates, Eng. Anal. Boundary Elem., vol. 64, pp. 122–136, 2016. DOI: https://doi.org/10.1016/j.enganabound.2015.12.003.