References
- S.X. Gong and H. Horii, General solution to the problem of microcracks near the tip of a main crack, J. Mech. Phys. Solids, vol. 37, no. 1, pp. 27–46, 1989. DOI: https://doi.org/10.1016/0022-5096(87)90003-2.
- S.X. Gong and S.A. Meguid, A general solution to the antiplane problem of an arbitrarily located elliptical hole near the tip of a main crack, Int. J. Solids Struct., vol. 28, no. 2, pp. 249–263, 1991. DOI: https://doi.org/10.1016/0020-7683(91)90209-X.
- S.X. Gong and S.A. Meguid, Microdefect interacting with a main crack: A general treatment, Int. J. Mech. Sci., vol. 34, no. 12, pp. 933–945, 1992. DOI: https://doi.org/10.1016/0020-7403(92)90063-M.
- M. Kachanov, A simple technique of stress analysis in elastic solids with many cracks, Int. J. Fract., vol. 28, pp. R11–R19, 1985.
- M. Kachanov, Elastic solids with many cracks: A simple method of analysis, Int. J. Solids Struct., vol. 23, no. 1, pp. 23–43, 1987. DOI: https://doi.org/10.1016/0020-7683(87)90030-8.
- V. Petrova, V. Tamuzs, and N. Romalis, A survey of macro- microcrack interaction problems, Appl. Mech. Rev., vol. 53, no. 5, pp. 117–146, 2000. DOI: https://doi.org/10.1115/1.3097344.
- V. Tamuzs, V. Petrova, and N. Romalis, Plane problem of macro-microcrack interaction taking account of crack closure, Eng. Fract. Mech., vol. 55, no. 6, pp. 957–967, 1996. DOI: https://doi.org/10.1016/S0013-7944(96)00073-2.
- X. Li, X. Li, and X. Jiang, Influence of a micro-crack on the finite macro-crack, Eng. Fract. Mech., vol. 177, pp. 95–103, 2017. DOI: https://doi.org/10.1016/j.engfracmech.2017.03.037.
- X. Li, X. Li, and H. Yang, Effect of micro-cracks on plastic zone ahead of the macro-crack tip, J. Mater. Sci., vol. 52, pp. 1–14, 2017.
- S. Loehnert and T. Belytschko, Crack shielding and amplification due to multiple microcracks interacting with a macrocrack, Int. J. Fract., vol. 145, no. 1, pp. 1–8, 2007. DOI: https://doi.org/10.1007/s10704-007-9094-1.
- D. Sutula, P. Kerfriden, T.V. Dam, et al., Minimum energy multiple crack propagation. Part III: XFEM computer implementation and applications, Eng. Fract. Mech., vol. 191, pp. 257–276, 2018. DOI: https://doi.org/10.1016/j.engfracmech.2017.08.004.
- S.M. Ohr, An electron microscope study of crack tip deformation and its impact on the dislocation theory of fracture, Mater. Sci. Eng., vol. 72, no. 1, pp. 1–35, 1985. DOI: https://doi.org/10.1016/0025-5416(85)90064-3.
- T. Seelig and D. Gross, On the interaction and branching of fast running cracks—a numerical investigation, J. Mech. Phys. Solids, vol. 47, no. 4, pp. 935–952, 1999. DOI: https://doi.org/10.1016/S0022-5096(98)00069-6.
- G.L. Greno, J.L. Otegui, and R.E. Boeri, Mechanisms of fatigue crack growth in Austempered Ductile Iron, Int. J. Fatigue, vol. 21, no. 1, pp. 35–43, 1999. DOI: https://doi.org/10.1016/S0142-1123(98)00055-3.
- B. Obara, Identification of transcrystalline microcracks observed in microscope images of a dolomite structure using image analysis methods based on linear structuring element processing, Comput. Geosci., vol. 33, no. 2, pp. 151–158, 2007. DOI: https://doi.org/10.1016/j.cageo.2006.07.004.
- M.F. Marji, On the use of power series solution method in the crack analysis of brittle materials by indirect boundary element method, Eng. Fract. Mech., vol. 98, pp. 365–382, 2013.
- Y. Huang, Y. Bu, L. Zhou, et al., Fatigue crack growth and propagation along the adhesive interface between fiber-reinforced composites, Eng. Fract. Mech., vol. 110, pp. 290–299, 2013. DOI: https://doi.org/10.1016/j.engfracmech.2013.08.011.
- S. Suresh, Fatigue crack deflection and fracture surface contact: Micromechanical models, Metall. Mater. Trans. A, vol. 16, no. 2, pp. 249–260, 1985. DOI: https://doi.org/10.1007/BF02816051.
- N.I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity, Springer, Netherlands, 2009.
- F. Barlat, J.C. Brem, J.W. Yoon, et al., Plane stress yield function for aluminum alloy sheets—Part 1: Theory, Int. J. Plast., vol. 19, no. 9, pp. 1297–1319, 2003. DOI: https://doi.org/10.1016/S0749-6419(02)00019-0.
- B.A. Bilby and A. H. C. H. Swinden, The spread of plastic yield from a notch, Proc. R. Soc. A Math. Phys. Eng. Sci., vol. 272, pp. 304–314, 1963.
- D.S. Dugdale, Yielding of steel sheets containing slits, J. Mech. Phys. Solids, vol. 8, no. 2, pp. 100–104, 1960. DOI: https://doi.org/10.1016/0022-5096(60)90013-2.
- R. Hill, Constitutive modelling of orthotropic plasticity in sheet metals, J. Mech. Phys. Solids, vol. 38, no. 3, pp. 405–417, 1990. DOI: https://doi.org/10.1016/0022-5096(90)90006-P.
- R. Hill, A theory of the yielding and plastic flow of anisotropic metals, Proc. R. Soc. A Math. Phys. Eng. Sci., vol. 193, pp. 281–297, 1948.
- D.R. Irwin. Plastic zone near a crack and fracture toughness, vol. 4, pp. 463–478, 1960.
- C. Xie, Q.H. Fang, X. Liu, et al., Theoretical study on the (1-012) deformation twinning and cracking in coarse-grained magnesium alloys, Int. J. Plast., vol. 82, pp. 44–61, 2016. DOI: https://doi.org/10.1016/j.ijplas.2016.02.001.
- C. Xie, J.M. He, B.W. Zhu, et al., Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression, Int. J. Plast., vol. 111, pp. 211–233, 2018. DOI: https://doi.org/10.1016/j.ijplas.2018.07.017.
- C. Xie, M.H. Xiang, J.K. Du, et al., Asymmetric yield effect evolving with internal variables during continuous large deformations and its FEM validation, Int. J. Plast., vol. 130, pp. 102723, 2020. DOI: https://doi.org/10.1016/j.ijplas.2020.102723.
- L. Pook, Why Metal Fatigue Matters, Springer, Netherlands, pp. 161–165, 2003.
- P.P. Milella, Fatigue and Corrosion in Metals, Springer, Milan, pp. 1–72, 2013.
- K.J. Miller, Short Fatigue Cracks, Springer, Netherlands, pp. 3–22, 1989.
- R.I. Stephens, A. Fatemi, R.R. Stephen and H.O. Fuchs, Metal fatigue in engineering. John Wiley & Sons, Inc, New York, 2000.
- M.H.E. Haddad, T.H. Topper, and K.N. Smith, Prediction of non propagating cracks, Eng. Fract. Mech., vol. 11, no. 3, pp. 573–584, 1979. DOI: https://doi.org/10.1016/0013-7944(79)90081-X.
- M.D. Chapetti, Fatigue propagation threshold of short cracks under constant amplitude loading, Int. J. Fatigue, vol. 25, no. 12, pp. 1319–1326, 2003. DOI: https://doi.org/10.1016/S0142-1123(03)00065-3.
- W.J. Wang and Q.Y. Liu. Study on Fatigue Crack Growth Rate of PD3 and U71Mn Rail Steel. Journal of Mechanical Strength, vol. 29, pp. 1026–1029, 2007.
- B.N. Leis, A.T. Hopper, J. Ahmad, et al., Critical review of the fatigue growth of short cracks, Eng. Fract. Mech., vol. 23, no. 5, pp. 883–898, 1986. DOI: https://doi.org/10.1016/0013-7944(86)90099-8.
- E. Wolf, Fatigue crack closure under cyclic tension, Eng. Fract. Mech., vol. 2, no. 1, pp. 37–44, in3–in4, 45, 1970. DOI: https://doi.org/10.1016/0013-7944(70)90028-7.
- K. Tanaka, Fatigue crack propagation from a crack inclined to the cyclic tensile axis, Eng. Fract. Mech., vol. 6, no. 3, pp. 493–507, 1974. DOI: https://doi.org/10.1016/0013-7944(74)90007-1.
- F. Erdogan and G.C.J. Sih, On the crack extension in plates under plane loading and transverse shear, J. Basic Eng., vol. 85, no. 4, pp. 519–525, 1963.
- G.C. Sih and B.M. Barthelemy, Mixed mode fatigue crack growth predictions, Eng. Fract. Mech., vol. 13, no. 3, pp. 439–451, 1980. DOI: https://doi.org/10.1016/0013-7944(80)90076-4.