References
- H. T. Hahn, Residual-stresses in polymer matrix composite laminates, J. Compos. Mater., vol. 10, no. 4, pp. 266–278, 1976. DOI: https://doi.org/10.1177/002199837601000401.
- E. Ruiz, and F. Trochu, Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts, Compos. Part A – Appl. Sci. Manufact., vol. 36, no. 6, pp. 806–826, 2005. DOI: https://doi.org/10.1016/j.compositesa.2004.10.021.
- K. D. Potter, M. Campbell, C. Langer, and M. R. Wisnom, The generation of geometrical deformations due to tool/part interaction in the manufacture of composite components, Compos. Part A – Appl. Sci. Manufact., vol. 36, no. 2, pp. 301–308, 2005. DOI: https://doi.org/10.1016/S1359-835X(04)00150-2.
- W. Chen, and Z. Dianyun, A micromechanics-based processing model for predicting residual stress in fiber-reinforced polymer matrix composites, Compos. Struct., vol. 204, pp. 153–166, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.07.016.
- M. Abouhamzeh, J. Sinke, and R. Benedictus, Prediction models for distortions and residual stresses in thermoset polymer laminates: An overview, J. Manuf. Mater. Process., vol. 3, no. 4, pp. 87, 2019. DOI: https://doi.org/10.3390/jmmp3040087.
- M. Péron, F. Jacquemin, P. Casari, and G. Orange, Thermo-mechanical characterization of a thermoplastic composite and prediction of the residual stresses and lamina curvature during cooling, AIP Conference Proceedings, AIP Publishing, Maryland USA, 2017.
- Y. K. Kim, and S. R. White, Viscoelastic analysis of processing-induced residual stresses in thick composite laminates. Mechanics of composite materials and structures, Mech. Adv. Mater. Struct., vol. 4, no. 4, pp. 361–387, 1997. DOI: https://doi.org/10.1080/10759419708945889.
- M. Benavente, L. Marcin, A. Courtois, M. Levesque, and E. Ruiz, Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing, Compos. Part A – Appl. Sci. Manufact., vol. 107, pp. 205–216, 2018. DOI: https://doi.org/10.1016/j.compositesa.2018.01.005.
- N. Ersoy, K. Potter, M. R. Wisnom, and M. J. Clegg, Development of spring-in angle during cure of a thermosetting composite, Compos. Part A – Appl. Sci. Manuf., vol. 36, no. 12, pp. 1700–1706, 2005. DOI: https://doi.org/10.1016/j.compositesa.2005.02.013.
- M. Gigliotti, M. R. Wisnom, and K. D. Potter, Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates, Compos. Sci. Technol., vol. 63, no. 2, pp. 187–197, 2003. DOI: https://doi.org/10.1016/S0266-3538(02)00195-1.
- S. R. White, and H. T. Hahn, Process modeling of composite-materials – Residual-stress development during cure. 2. Experimental validation, J. Compos. Mater., vol. 26, no. 16, pp. 2423–2453, 1992. DOI: https://doi.org/10.1177/002199839202601605.
- D. W. Radford, Balancing mechanisms of distortion to yield distortion-free/shape stable composites, J. Reinf. Plast. Comp., vol. 29, no. 12, pp. 1875–1892, 2010. DOI: https://doi.org/10.1177/0731684409340707.
- M. R. Wisnom, M. Gigliotti, N. Ersoy, M. Campbell, and K. D. Potter, Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures, Compos. Part A: Appl. Sci. Manufact., vol. 37, no. 4, pp. 522–529, 2006. DOI: https://doi.org/10.1016/j.compositesa.2005.05.019.
- K. Takagaki, S. Minakuchi, and N. Takeda, Process-induced strain and distortion in curved composites. Part I: Development of fiber-optic strain monitoring technique and analytical methods, Compos. Part A: Appl. Sci. Manufact., vol. 103, pp. 236–251, 2017. DOI: https://doi.org/10.1016/j.compositesa.2017.09.020.
- K. Takagaki, S. Minakuchi, and N. Takeda, Process-induced strain and distortion in curved composites. Part II: Parametric study and application, Compos. Part A: Appl. Sci. Manufact., vol. 103, pp. 219–229, 2017. DOI: https://doi.org/10.1016/j.compositesa.2017.09.019.
- A. Vedernikov, et al., Effects of pulling speed on structural performance of L-shaped pultruded profiles, Compos. Struct., vol. 255, pp. 112967, 2021. DOI: https://doi.org/10.1016/j.compstruct.2020.112967.
- M. M. Shokrieh, and S. M. Kamali, Theoretical and experimental studies on residual stresses in laminated polymer composites, J. Compos. Mater., vol. 39, no. 24, pp. 2213–2225, 2005. DOI: https://doi.org/10.1177/0021998305053511.
- Anxin Ding, Shuxin Li, Jihui Wang, and Lei Zu, A three-dimensional thermo-viscoelastic analysis of process-induced, Compos. Struct., vol. 129, pp. 60–69, 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.03.034.
- G. Twigg, A. Poursartip, and G. Fernlund, Tool-part interaction in composites processing. Part I: experimental investigation and analytical model, Compos. Part A: Appl. Sci. Manufact., vol. 35, no. 1, pp. 121–133, 2004. DOI: https://doi.org/10.1016/S1359-835X(03)00131-3.
- A. X. Ding, S. X. Li, J. X. Sun, J. H. Wang, and L. Zu, A comparison of process-induced residual stresses and distortions in composite structures with different constitutive laws, J. Reinf. Plast. Comp., vol. 35, no. 10, pp. 807–823, 2016. DOI: https://doi.org/10.1177/0731684416629764.
- G. Fernlund, et al., Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and layup on the dimensional fidelity of autoclave-processed composite parts, Compos. Part A: Appl. Sci. Manufact., vol. 33, no. 3, pp. 341–351, 2002. DOI: https://doi.org/10.1016/S1359-835X(01)00123-3.
- L. P. Canal, M. Benavente, M. Hausmann, and V. Michaud, Process-induced strains in RTM processing of polyurethane/carbon composites, Compos. Part A: Appl. Sci. Manufact., vol. 78, pp. 264–273, 2015. DOI: https://doi.org/10.1016/j.compositesa.2015.08.018.
- I. Baran, C. C. Tutum, M. W. Nielsen, and J. H. Hattel, Process induced residual stresses and distortions in pultrusion, Compos. Part B: Eng., vol. 51, pp. 148–161, 2013. DOI: https://doi.org/10.1016/j.compositesb.2013.03.031.
- P. Prasatya, G. B. McKenna, and S. L. Simon, A viscoelastic model for predicting isotropic residual stresses in thermosetting materials: Effects of processing parameters, J. Compos. Mater., vol. 35, no. 10, pp. 826–848, 2001. DOI: https://doi.org/10.1177/a037322.
- P. Rosso, B. Fiedler, K. Friedrich, and K. Schulte, The influence of residual stresses implicated via cure volume shrinkage on CF/VEUH-composites, J. Mater. Sci., vol. 41, no. 2, pp. 383–388, 2006. DOI: https://doi.org/10.1007/s10853-005-2619-y.
- D. J. O'Brien, P. T. Mather, and S. R. White, Viscoelastic properties of an epoxy resin during cure, J. Compos. Mater., vol. 35, no. 10, pp. 883–904, 2001. DOI: https://doi.org/10.1177/a037323.
- E. Ruiz, and F. Trochu, Thermomechanical properties during cure of glass-polyester RTM composites: Elastic and viscoelastic modeling, J. Compos. Mater., vol. 39, no. 10, pp. 881–916, 2005. DOI: https://doi.org/10.1177/0021998305048732.
- A. Courtois, et al., Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling, J. Compos. Mater., vol. 53, no. 2, pp. 155–171, 2019. DOI: https://doi.org/10.1177/0021998318781226.
- C. Heinrich, M. Aldridge, A. S. Wineman, J. Kieffer, A. M. Waas, and K. W. Shahwan, Generation of heat and stress during the cure of polymers used in fiber composites, Int. J. Eng. Sci., vol. 53, pp. 85–111, 2012. DOI: https://doi.org/10.1016/j.ijengsci.2011.12.004.
- C. Brauner, T. Frerich, and A. S. Herrmann, Cure-dependent thermomechanical modelling of the stress relaxation behaviour of composite materials during manufacturing, J. Compos. Mater., vol. 51, no. 7, pp. 877–898, 2017. DOI: https://doi.org/10.1177/0021998316656924.
- A. Courtois, L. Marcin, M. Benavente, E. Ruiz, and M. Levesque, Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites, Int. J. Solids Struct., vol. 163, pp. 61–74, 2019. DOI: https://doi.org/10.1016/j.ijsolstr.2018.12.018.
- A. Trofimov, J. Le-Pavic, C. Ravey, W. Albouy, D. Therriault, and M. Lévesque, Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding, Compos. Part A: Appl. Sci. Manufact., vol. 140, pp. 106145, 2021. DOI: https://doi.org/10.1016/j.compositesa.2020.106145.
- Q. Wang, T. Li, X. F. Yang, Q. Z. Huang, B. Wang, and M. F. Ren, Multiscale numerical and experimental investigation into the evolution of process-induced residual strain/stress in 3D woven composite, Compos. Part A: Appl. Sci. Manufact., vol. 135, pp. 135, 2020.
- Z. Y. Yuan, Y. Wang, G. Yang, A. Tang, Z. Yang, S. Li, Y. Li, and D. Song, Evolution of curing residual stresses in composite using multi-scale method, Compos. Part B: Eng., vol. 155, pp. 49–61, 2018. DOI: https://doi.org/10.1016/j.compositesb.2018.08.012.
- D. N. Li, X. D. Li, J. F. Dai, and S. B. Xi, A comparison of curing process-induced residual stresses and cure shrinkage in micro-scale composite structures with different constitutive laws, Appl. Compos. Mater., vol. 25, no. 1, pp. 67–84, 2018. DOI: https://doi.org/10.1007/s10443-017-9608-6.
- R. Mahnken, and C. Dammann, A three-scale framework for fibre-reinforced-polymer curing Part I: Microscopic modeling and mesoscopic effective properties, Int. J. Solids Struct., vol. 100–101, pp. 341–355, 2016. DOI: https://doi.org/10.1016/j.ijsolstr.2016.09.003.
- S. Shang, and G. J. Yun, Stochastic finite element with material uncertainties: Implementation in a general purpose simulation program, Finite Elem. Anal. Des., vol. 64, pp. 65–78, 2013. DOI: https://doi.org/10.1016/j.finel.2012.10.001.
- F.-Y. Zhu, S. Jeong, H. J. Lim, and G. J. Yun, Probabilistic multiscale modeling of 3D randomly oriented and aligned wavy CNT nanocomposites and RVE size determination, Compos. Struct., vol. 195, pp. 265–275, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.04.060.
- S. Sourour, and M. R. Kamal, Differential scanning calorimetry of epoxy cure: Isothermal cure kinetics, Thermochim. Acta, vol. 14, no. 1–2, pp. 41–59, 1976. DOI: https://doi.org/10.1016/0040-6031(76)80056-1.
- M. R. Kamal, Thermoset Characterization for Moldability Analysis, Polym. Eng. Sci., vol. 14, no. 3, pp. 231–239, 1974. DOI: https://doi.org/10.1002/pen.760140312.
- D. D. Shin, and H. T. Hahn, A consistent cure kinetic model for AS4/3502 graphite/epoxy, Compos. Part A: Appl. Sci. Manufact., vol. 31, no. 9, pp. 991–999, 2000. DOI: https://doi.org/10.1016/S1359-835X(00)00011-7.
- S. R. White, and H. T. Hahn, Mechanical property and residual stress development during cure of a graphite/BMI composite, Polym. Eng. Sci., vol. 30, no. 22, pp. 1465–1473, 1990.
- W. I. Lee, A. C. Loos, and G. S. Springer, Heat of reaction, degree-of-cure, and viscosity of Hercules 3501-6 resin, J. Compos. Mater., vol. 16, pp. 510, 1982. DOI: https://doi.org/10.1177/002199838201600605.
- M. N. Ozisik, Heat Conduction, John Wiley & Sons, Inc., New York, 1993.
- G. S. Springer, and S. W. Tsai, Thermal conductivities of unidirectional materials, J. Compos. Mater., vol. 1, no. 2, pp. 166–173, 1967. DOI: https://doi.org/10.1177/002199836700100206.
- Z. Yuan, Y. Wang, G. Yang, A. Tang, Z. Yang, S. Li, Y. Li and D. Song, Evolution of curing residual stresses in composite using multi-scale method, Compos. Part B: Eng., no. 155, pp. 59–61, 2018.
- L. Jun, Y. XueFeng, L. Yiunghua, C. ZhangZhi, K. ZheJun, H. XiaoCai and D. Di, Thermo-viscoelastic analysis of the integrated T-shaped composite structures, Compos. Sci. Technol., vol. 70, no. 10, pp. 1497–1503, 2010.
- M. Abouhamzeh, J. Sinke, K. M. B. Jansen and R. Benedictus, Thermo-viscoelastic analysis of GLARE, ., vol. 99, pp. 1–8, 2016. DOI: https://doi.org/10.1016/j.compositesb.2016.05.060.
- A. Gillani, Development of Material Model Subroutimes for Linear and Non Linear Response of Elastomers, University of Western Ontario, Ontario, 2018.
- H. Brinson, and C. Brinson, Polymer Engineering Science and Viscoelasticity an Introduction, Springer, New York, 2008.
- Y. K. Kim, and S. R. White, Stress relaxation behavior of 3501-6 epoxy resin during cure, Polym. Eng. Sci., vol. 36, no. 23, pp. 2852–2862, 1996. DOI: https://doi.org/10.1002/pen.10686.
- S. R. White, and Y. K. Kim, Process-induced residual stress analysis of AS4/3501-6 composite material, Mech. Adv. Mater. Struct., vol. 5, no. 2, pp. 153–186, 1998. DOI: https://doi.org/10.1080/10759419808945897.
- M S. ABAQUS/Standard User's Manual, Dassault Systems, Providence, RI, 2013.
- G. Stefanou, The stochastic finite element method: Past, present and future, Comp. Methods Appl. Mech. Eng., vol. 198, no. 9–12, pp. 1031–1051, 2009. DOI: https://doi.org/10.1016/j.cma.2008.11.007.
- Jun Zhang, and Bruce Ellingwood, Orthogonal series expansions of random fields in reliability analysis, J. Eng. Mech., vol. 120, no. 12, pp. 2660–2677, 1994. DOI: https://doi.org/10.1061/(ASCE)0733-9399(1994)120:12(2660).
- P. Kosky, R. T. Balmer, W. D. Keat, and G. Wise, Exploring Engineering: An Introduction to Engineering and Design, Academic Press, Cambridge, Massachusetts, USA, 2015.
- R. F. Gibson, Principles of Composite Material Mechanics, CRC Press, Boca Raton, FL, 2016.