References
- F. Xu, T. Wen, T.J. Lu, and K. A. Seffen, Skin biothermomechanics for medical treatments, J. Mech. Behav. Biomed. Mater., vol. 1, no. 2, pp. 172–187, 2008. DOI: https://doi.org/10.1016/j.jmbbm.2007.09.001.
- P. Ribeiro, H. Akhavan, A. Teter, and J. Warmiński, A review on the mechanical behaviour of curvilinear fibre composite laminated panels, J. Compos. Mater., vol. 48, no. 22, pp. 2761–2777, 2014. DOI: https://doi.org/10.1177/0021998313502066.
- A.F. Martin and A.W. Leissa, Application of the Ritz method to plane elasticity problems for composite sheets with variable fibre spacing, Int. J. Numer. Meth. Eng., vol. 28, no. 8, pp. 1813–1825, 1989. DOI: https://doi.org/10.1002/nme.1620280808.
- D. Punera and T. Kant, A critical review of stress and vibration analyses of functionally graded shell structures, Compos. Struct., vol. 210, pp. 787–809, 2019. DOI: https://doi.org/10.1016/j.compstruct.2018.11.084.
- A.W. Leissa and A.F. Martin, Vibration and buckling of rectangular composite plates with variable fiber spacing, Compos. Struct., vol. 14, no. 4, pp. 339–357, 1990. DOI: https://doi.org/10.1016/0263-8223(90)90014-6.
- S.Y. Kuo and L.C. Shiau, Buckling and vibration of composite laminated plates with variable fiber spacing, Compos. Struct., vol. 90, no. 2, pp. 196–200, 2009. DOI: https://doi.org/10.1016/j.compstruct.2009.02.013.
- S. Murugan, E.I. Saavedra Flores, S. Adhikari, and M.I. Friswell, Optimal design of variable fiber spacing composites for morphing aircraft skins, Compos. Struct., vol. 94, no. 5, pp. 1626–1633, 2012. DOI: https://doi.org/10.1016/j.compstruct.2011.12.023.
- A. Mukherjee and B. Varughese, A ply drop-off element for inclusion of drop-off in the global analysis of layered composite structures, Comput. Struct., vol. 54, no. 5, pp. 865–870, 1995. DOI: https://doi.org/10.1016/0045-7949(94)00331-V.
- A. Houmat, Nonlinear free vibration of a composite rectangular specially-orthotropic plate with variable fiber spacing, Compos. Struct., vol. 94, no. 10, pp. 3029–3036, 2012. DOI: https://doi.org/10.1016/j.compstruct.2012.05.006.
- B.R. Vidyashankar and A.V. Krishna Murty, Analysis of laminates with ply drops, Compos. Sci. Technol., vol. 61, no. 5, pp. 749–758, 2001. DOI: https://doi.org/10.1016/S0266-3538(01)00010-0.
- M.T. Dinardo and P.A. Lagacet, Buckling and postbuckling of laminated composite plates with ply dropoffs, AIAA J., vol. 27, no. 10, pp. 1392–1398, 1989. DOI: https://doi.org/10.2514/3.10276.
- G. Grimes and E. Dusablon, Study of compression properties of graphite/epoxy composites with discontinuities, Compos. Mater. Test. Des. (6th Conf., 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, ASTM International, pp. 513–526, 1982. DOI: https://doi.org/10.1520/STP28498S.
- M.W. Hyer and R.F. Charette, Use of curvilinear fiber format in composite structure design, AIAA J., vol. 29, no. 6, pp. 1011–1015, 1991. DOI: https://doi.org/10.2514/3.10697.
- M.W. Hyer and H.H. Lee, The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes, Compos. Struct., vol. 18, no. 3, pp. 239–261, 1991. DOI: https://doi.org/10.1016/0263-8223(91)90035-W.
- Z. Gurdal and R. Olmedo, In-plane response of laminates with spatially varying fiber orientations – Variable stiffness concept, AIAA J., vol. 31, no. 4, pp. 751–758, 1993. DOI: https://doi.org/10.2514/3.11613.
- B. C. Kim, K. Potter, and P. M. Weaver, Continuous tow shearing for manufacturing variable angle tow composites, Compos. Part A Appl. Sci. Manuf., vol. 43, no. 8, pp. 1347–1356, 2012. DOI: https://doi.org/10.1016/j.compositesa.2012.02.024.
- K. Katagiri et al., Resin molding by using electro-activated deposition for efficient manufacturing of carbon fiber reinforced plastic, Compos. Struct., vol. 182, pp. 666–673, 2017. DOI: https://doi.org/10.1016/j.compstruct.2017.09.064.
- M.N. Grimshaw, C. Machine, C.G. Grant, J. Manuel, and L. Diaz, Advanced technology tape laying for affordable manufacturing of large composite structures. In: Int. Sampe Symp. Exhib. SAMPE, pp. 2484–2494, 1999.
- A.W. Blom, B.F. Tatting, J.M.A.M. Hol, and Z. Gürdal, Fiber path definitions for elastically tailored conical shells, Compos. Part B Eng., vol. 40, no. 1, pp. 77–84, 2009. DOI: https://doi.org/10.1016/j.compositesb.2008.03.011.
- K. Uhlig, L. Bittrich, A. Spickenheuer, and J.H.S. Almeida, Waviness and fiber volume content analysis in continuous carbon fiber reinforced plastics made by tailored fiber placement, Compos. Struct., vol. 222, pp. 110910, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.110910.
- G. Huang, H. Wang, and G. Li, An efficient reanalysis assisted optimization for variable-stiffness composite design by using path functions, Compos. Struct., vol. 153, pp. 409–420, 2016. DOI: https://doi.org/10.1016/j.compstruct.2016.06.043.
- H. Ghiasi, K. Fayazbakhsh, D. Pasini, and L. Lessard, Optimum stacking sequence design of composite materials Part II: Variable stiffness design, Compos. Struct., vol. 93, no. 1, pp. 1–13, 2010. DOI: https://doi.org/10.1016/j.compstruct.2010.06.001.
- J. Huang and R.T. Haftka, Optimization of fiber orientations near a hole for increased load-carrying capacity of composite laminates, Struct. Multidisc. Optim., vol. 30, no. 5, pp. 335–341, 2005. DOI: https://doi.org/10.1007/s00158-005-0519-z.
- S. Nikbakt, S. Kamarian, and M. Shakeri, A review on optimization of composite structures Part I: Laminated composites, Compos. Struct., vol. 195, pp. 158–185, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.03.063.
- Z. Zamani, H. Haddadpour, and M.R. Ghazavi, Curvilinear fiber optimization tools for design thin walled beams, Thin-Walled Struct., vol. 49, no. 3, pp. 448–454, 2011. DOI: https://doi.org/10.1016/j.tws.2010.08.002.
- Z. Wu, P.M. Weaver, G. Raju, and B. Chul Kim, Buckling analysis and optimisation of variable angle tow composite plates, Thin-Walled Struct., vol. 60, pp. 163–172, 2012. DOI: https://doi.org/10.1016/j.tws.2012.07.008.
- V. Mishra, D.M.J. Peeters, and M.M. Abdalla, Stiffness and buckling analysis of variable stiffness laminates including the effect of automated fibre placement defects, Compos. Struct., vol. 226, pp. 111233, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111233.
- BC(Eric). Kim, K. Hazra, P. Weaver, and K. Potter, Limitations of fibre placement techniques for variable angle tow composites and their process-induced defects. In: Proc. 18th Int. Conf. Compos. Mater., Jeju, Korea, pp. 21–6, 2011.
- B.C. Kim, P.M. Weaver, and K. Potter, Computer aided modelling of variable angle tow composites manufactured by continuous tow shearing, Compos. Struct., vol. 129, pp. 256–267, 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.04.012.
- K. Fayazbakhsh, M. Arian Nik, D. Pasini, and L. Lessard, Defect layer method to capture effect of gaps and overlaps in variable stiffness laminates made by automated fiber placement, Compos. Struct., vol. 97, pp. 245–251, 2013. DOI: https://doi.org/10.1016/j.compstruct.2012.10.031.
- M. Ganapathi, A. Venkatachari, M. Haboussi, and A. T. Mathew, Nonlinear free flexural vibration of curvilinear fibre composite laminates using a higher-order element, Int. J. Str. Stab. Dyn., vol. 18, no. 12, pp. 1850147, 2018. DOI: https://doi.org/10.1142/S021945541850147X.
- T. Rahman, S.T. Ijsselmuiden, M.M. Abdalla, and E.L. Jansen, Postbuckling analysis of variable stiffness composite plates using a finite element-based perturbation method, Int. J. Str. Stab. Dyn., vol. 11, no. 04, pp. 735–753, 2011. DOI: https://doi.org/10.1142/S0219455411004324.
- K. Croft, L. Lessard, D. Pasini, M. Hojjati, J. Chen, and A. Yousefpour, Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates, Compos. Part A Appl. Sci. Manuf., vol. 42, no. 5, pp. 484–491, 2011. DOI: https://doi.org/10.1016/j.compositesa.2011.01.007.
- A. Beakou, M. Cano, J.B. Le Cam, and V. Verney, Modelling slit tape buckling during automated prepreg manufacturing: A local approach, Compos. Struct., vol. 93, no. 10, pp. 2628–2635, 2011. DOI: https://doi.org/10.1016/j.compstruct.2011.04.030.
- A. Pagani and A.R. Sanchez-Majano, Influence of fiber misalignments on buckling performance of variable stiffness composites using layerwise models and random fields, Mech. Adv. Mater. Struct., pp. 1–16, 2020. DOI: https://doi.org/10.1080/15376494.2020.1771485.
- J. Lee and S.H. Lee, Flexural–torsional behavior of thin-walled composite beams, Thin-Walled Struct., vol. 42, no. 9, pp. 1293–1305, 2004. DOI: https://doi.org/10.1016/j.tws.2004.03.015.
- X.H. Nguyen, N.-I. Kim, and J. Lee, Optimum design of thin-walled composite beams for flexural–torsional buckling problem, Compos Struct., vol. 132, pp. 1065–1074, 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.06.036.
- M.G. Günay and T. Timarcı, Stresses in thin-walled composite laminated box-beams with curvilinear fibers: Antisymmetric and symmetric fiber paths, Thin-Walled Struct., vol. 138, pp. 170–182, 2019. DOI: https://doi.org/10.1016/j.tws.2019.02.003.
- V.Z. Vlasov, Thin-Walled Elastic Beams, PST Cat., vol. 428, 1959.
- A. Gjelsvik, The Theory of Thin Walled Bars. 1st ed., Wiley, New York, 1981.
- L. Librescu and O. Song, Thin-Walled Composite Beams: Theory and Applications, vol. 131, 1st ed., Springer, Dordrecht, 2006. DOI: https://doi.org/10.1007/1-4020-4203-5.
- V.V. Volovoi, D.H. Hodges, V.L. Berdichevsky, and V.G. Sutyrin, Asymptotic theory for static behavior of elastic anisotropic I-beams, Int. J. Solids Struct., vol. 36, no. 7, pp. 1017–1043, 1999. DOI: https://doi.org/10.1016/S0020-7683(97)00341-7.
- A. Pagani, R. Augello, and E. Carrera, Frequency and mode change in the large deflection and post-buckling of compact and thin-walled beams, J. Sound Vib., vol. 432, pp. 88–104, 2018. DOI: https://doi.org/10.1016/j.jsv.2018.06.024.
- E. Carrera, I. Kaleel, and M. Petrolo, Elastoplastic analysis of compact and thin-walled structures using classical and refined beam finite element models, Mech. Adv. Mater. Struct., vol. 26, no. 3, pp. 274–286, 2019. DOI: https://doi.org/10.1080/15376494.2017.1378780.
- M.D. Demirbas, U. Caliskan, X. Xu, and M. Filippi, Evaluation of the bending response of compact and thin-walled FG beams with CUF, Mech. Adv. Mater. Struct., pp. 1–10, 2020.DOI: https://doi.org/10.1080/15376494.2019.1704951.
- O. Song and L. Librescu, Free vibration of anisotropic composite thin-walled beams of closed cross-section contour, J. Sound Vib., vol. 167, no. 1, pp. 129–147, 1993. DOI: https://doi.org/10.1006/jsvi.1993.1325.
- R.V. Rao, V.J. Savsani, and D.P. Vakharia, Teaching–learning-based optimization: A novel method for constrained mechanical design optimization problems, CAD Comput. Aided Des., vol. 43, no. 3, pp. 303–315, 2011. DOI: https://doi.org/10.1016/j.cad.2010.12.015.
- R.V. Rao, V.J. Savsani, and J. Balic, Teaching–learning-based optimization algorithm for unconstrained and constrained real-parameter optimization problems, Eng. Optim., vol. 44, no. 12, pp. 1447–1462, 2012. DOI: https://doi.org/10.1080/0305215X.2011.652103.
- J.N. Reddy, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press, Boca Raton, FL, 2004.
- J. Lee, S.E. Kim, and K. Hong, Lateral buckling of I-section composite beams, Eng. Struct., vol. 24, no. 7, pp. 955–964, 2002. DOI: https://doi.org/10.1016/S0141-0296(02)00016-0.
- MATLAB. 9.7.0.1190202 (R2019b), The MathWorks Inc., Natick, Massachusetts, 2018.
- Z.M. Lin, D. Polyzois, and A. Shah, Stability of thin-walled pultruded structural members by the finite element method, Thin-Walled Struct., vol. 24, no. 1, pp. 1–18, 1996. DOI: https://doi.org/10.1016/0263-8231(95)00034-8.
- P.K. Masjedi and P. M. Weaver, Analytical solution for the fully coupled static response of variable stiffness composite beams, Appl. Math. Model., vol. 81, pp. 16–36, 2020. DOI: https://doi.org/10.1016/j.apm.2019.12.010.
- V. Toĝan, Design of planar steel frames using teaching–learning based optimization, Eng. Struct., vol. 34, pp. 225–232, 2012. DOI: https://doi.org/10.1016/j.engstruct.2011.08.035.
- M. Mishra, S.K. Barman, D. Maity, and D. K. Maiti, Ant lion optimisation algorithm for structural damage detection using vibration data, J. Civil Struct. Health Monit., vol. 9, no. 1, pp. 117–136, 2019. DOI: https://doi.org/10.1007/s13349-018-0318-z.
- R.V. Rao, V.J. Savsani, and D.P. Vakharia, Teaching–learning-based optimization: An optimization method for continuous non-linear large scale problems, Inf. Sci. (NY), vol. 183, no. 1, pp. 1–15, 2012. DOI: https://doi.org/10.1016/j.ins.2011.08.006.
- T. Dede, Optimum design of grillage structures to LRFD-AISC with teaching–learning based optimization, Struct. Multidisc. Optim., vol. 48, no. 5, pp. 955–964, 2013. DOI: https://doi.org/10.1007/s00158-013-0936-3.
- M. Mishra, V.R. Gunturi, and D. Maity, Teaching–learning-based optimisation algorithm and its application in capturing critical slip surface in slope stability analysis, Soft Comput., vol. 24, no. 4, pp. 2969–2982, 2020. DOI: https://doi.org/10.1007/s00500-019-04075-3.
- S.O. Degertekin and M.S. Hayalioglu, Sizing truss structures using teaching–learning-based optimization, Comput. Struct., vol. 119, pp. 177–188, 2013. DOI: https://doi.org/10.1016/j.compstruc.2012.12.011.
- M. Mishra, S.K. Barman, D. Maity, and D.K. Maiti, Performance studies of 10 metaheuristic techniques in determination of damages for large-scale spatial trusses from changes in vibration responses, J. Comput. Civ. Eng., vol. 34, no. 2, pp. 04019052, 2020. DOI: https://doi.org/10.1061/(ASCE)CP.1943-5487.0000872.
- I. Aydogdu and A. Akin, Teaching and learning-based optimization algorithm for optimum design of steel buildings. In: Comput. Civ. Build. Eng., American Society of Civil Engineers, Reston, VA, pp. 2167–2175, 2014. DOI: https://doi.org/10.1061/9780784413616.269.
- A. Marouene, R. Boukhili, J. Chen, and A. Yousefpour, Buckling behavior of variable-stiffness composite laminates manufactured by the tow-drop method, Compos. Struct., vol. 139, pp. 243–253, 2016. DOI: https://doi.org/10.1016/j.compstruct.2015.12.025.