References
- X. Xu and H. Yang, Vision measurement of tunnel structures with robust modelling and deep learning algorithms, Sensors, Mech. Adv. Mater. Struct., vol. 20, no. 17, pp. 4945, 2020. DOI: https://doi.org/10.3390/s20174945.
- X. Xu, N. Fallahi, and H. Yang, Efficient CUF-based FEM analysis of thin-wall structures with Lagrange polynomial expansion, Mech. Adv. Mater. Struct., pp. 1–22, 2020. DOI: https://doi.org/10.1080/15376494.2020.1818331.
- S. Vidhate, J. Chung, V. Vaidyanathan, et al., Time dependent piezoresistive behavior of polyvinylidene fluoride/carbon nanotube conductive composite, Mater. Lett., vol. 21, no. 63, pp. 1771–1773, 2009.
- A. Bezazi, N. Frioui, and F. Scarpa, Tensile static, fatigue and relaxation behaviour of closed cell electret PVDF foams, Mech. Mater., vol. 43, no. 9, pp. 459–466, 2011. DOI: https://doi.org/10.1016/j.mechmat.2011.05.005.
- F.S. Al-Hazmi, D.M. de Leeuw, A.A. Al-Ghamdi, et al., Synthesis and characterization of novel Cu2O/PVDF nanocomposites for flexible ferroelectric organic electronic memory devices, Curr. Appl. Phys., vol. 17, no. 9, pp. 1181–1188, 2017. DOI: https://doi.org/10.1016/j.cap.2017.05.011.
- A. Ambroziak, Mechanical properties of Precontraint 1202S coated fabric under biaxial tensile test with different load ratios, Constr. Build. Mater., vol. 80, pp. 210–224, 2015. DOI: https://doi.org/10.1016/j.conbuildmat.2015.01.074.
- J. Ggonzález-Benito, D. Olmos, J.M. Martínez-Tarifa, et al., PVDF/BaTiO3/carbon nanotubes ternary nanocomposites prepared by ball milling: Piezo and dielectric responses, J. Appl. Polym. Sci., vol. 136, no. 29, pp. 47788, 2019.
- S. Bairagi and S.W. Ali, Effects of surface modification on electrical properties of KNN nanorod-incorporated PVDF composites, J. Mater. Sci., vol. 54, no. 17, pp. 11462–11484, 2019. DOI: https://doi.org/10.1007/s10853-019-03719-x.
- S. Roy, D.V. Bhalani, and S.K. Jewrajka, Surface segregation of segmented amphiphilic copolymer of poly (dimethylsiloxane) and poly (ethylene glycol) on poly (vinylidene fluoride) blend membrane for oil–water emulsion separation, Sep. Purif. Technol., vol. 232, pp. 115940, 2020. DOI: https://doi.org/10.1016/j.seppur.2019.115940.
- Z. Rahimi, A.A. Zinatizadeh, and S. Zinadini, Membrane bioreactors troubleshooting through the preparation of a high antifouling PVDF ultrafiltration mixed-matrix membrane blended with O-carboxymethyl chitosan-Fe3O4 nanoparticles, Environ. Technol., vol. 40, no. 26, pp. 3523–3533, 2019. DOI: https://doi.org/10.1080/09593330.2018.1480665.
- X. Xu, H. Yang, Y. Zhang, et al., Intelligent 3D data extraction method for deformation analysis of composite structures, Compos. Struct., vol. 203, no. 11, pp. 245–258, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.07.003
- B. Lin, Z.T. Li, Y. Yang, et al., Enhanced dielectric permittivity in surface-modified graphene/PVDF composites prepared by an electrospinning-hot pressing method, Compos. Sci. Technol., vol. 172, pp. 58–65, 2019. DOI: https://doi.org/10.1016/j.compscitech.2019.01.003.
- N. Hussain, M.H. Zhang, Q. Zhang, et al., Large piezoelectric strain in sub-10 nanometer two-dimensional polyvinylidene fluoride nanoflakes, ACS Nano, vol. 13, no. 4, pp. 4496–4506, 2019. DOI: https://doi.org/10.1021/acsnano.9b00104.
- F. Wang, X. Zhang, Y. Ma, et al., Conductive HNTs-PEDOT hybrid preparation and its application in enhancing the dielectric permittivity of HNTs-PEDOT/PVDF composites, Appl. Surf. Sci., vol. 458, pp. 924–930, 2018. DOI: https://doi.org/10.1016/j.apsusc.2018.07.077.
- P.W. Jaschin, R. Bhimireddi, and K.B.R. Varma, Enhanced dielectric properties of LaNiO3/BaTiO3/PVDF: a three-phase percolative polymer nanocrystal composite, ACS Appl. Mater. Interfaces, vol. 10, no. 32, pp. 27278–27286, 2018. DOI: https://doi.org/10.1021/acsami.8b07786.
- S. Acharya, C.S. Gopinath, P. Alegaonkar, et al., Enhanced microwave absorption property of reduced graphene oxide (RGO)–strontium hexaferrite (SF)/poly (vinylidene) fluoride (PVDF), Diam. Relat. Mater., vol. 89, pp. 28–34, 2018. DOI: https://doi.org/10.1016/j.diamond.2018.07.024.
- N. Phromviyo, P. Thongbai, and S. Maensiri, High dielectric permittivity and suppressed loss tangent in PVDF polymer nanocomposites using gold nanoparticle–deposited BaTiO3 hybrid particles as fillers, Appl. Surf. Sci., vol. 446, pp. 236–242, 2018. DOI: https://doi.org/10.1016/j.apsusc.2018.01.045.
- Y. Yu, M. Liu, H. Huang, et al., Low cost fabrication of polypropylene fiber composite membrane with excellent mechanical, superhydrophilic, antifouling and antibacterical properties for effective oil-in-water emulsion separation, React. Funct. Polym., vol. 142, pp. 15–24, 2019. DOI: https://doi.org/10.1016/j.reactfunctpolym.2019.05.010.
- F. Kong, M. Chang, and Z. Wang, Investigation of the effect of nanosilica on mechanical, structural, and fracture toughness of polyvinylidene fluoride films, Mater. Res. Express, vol. 6, no. 10, pp. 105369, 2019. DOI: https://doi.org/10.1088/2053-1591/ab413b.
- C.M.H.S. Da, J.M.L. Reis, L. G. M. O. De Medeiros, et al., Analysis of the cyclic tensile behaviour of an elasto-viscoplastic polyamide, Polym. Test., vol. 58, pp. 40–47, 2017. DOI: https://doi.org/10.1016/j.polymertesting.2016.12.009.
- D. Wong, E. Verron, A. Andriyana, et al., Constitutive modeling of randomly oriented electrospun nanofibrous membranes, Continuum Mech. Thermodyn., vol. 31, no. 1, pp. 317–329, 2019. DOI: https://doi.org/10.1007/s00161-018-0687-x.
- B. Dudem, D.H. Kim, L.K. Bharat, et al., Highly-flexible piezoelectric nanogenerators with silver nanowires and barium titanate embedded composite films for mechanical energy harvesting, Appl. Energy, vol. 230, pp. 865–874, 2018. DOI: https://doi.org/10.1016/j.apenergy.2018.09.009.