References
- L. Jian, et al., Derivation of calculation formula of friction force of soft shaft of steel wire based on LS and PSO. Mechanical Design and Research, vol. 32, no. 162(02), pp. 181–184, 2016.
- M. George, Rigid biological systems as models for synthetic composites, Science, vol. 310, pp. 1144–1147, 2005.
- M. T. Abba, et al. , Nacre-like hybrid films: Structure, properties, and the effect of relative humidity, J. Mech. Behav. Biomed. Mater., vol. 55, pp. 140–150, 2015. DOI: https://doi.org/10.1016/j.jmbbm.2015.10.013.
- S. Katharine, Structure: artificial armour, Nature, vol. 519, no. 7544, pp. S14–5, 2015.
- S. Gong, et al., Integrated ternary bioinspired nanocomposites via synergistic. Toughening of Reduced Graphene Oxide and Double-Walled Carbon Nanotubes. [J] ACS Nano, vol. 9, no. 12, pp. 11568–73, 2015.
- J. Schön, Coefficient of friction of composite delamination surfaces, Wear, vol. 237, no. 1, pp. 77–89, 2000. DOI: https://doi.org/10.1016/S0043-1648(99)00315-4.
- A. Tudor, and F. Ilie, New aspects concerning the selective transfer phenomenon in friction couple, in Proceedings of the Annual Symposium of the Institute of Solid Mechanics, Bucharest, Romania Academy, Bucharest 26–27 November, 1992. pp. 250–257.
- D. N. Garkunov, Tribotechnology (Wear and non-wear), F Textbook, Moscow, 2001. (in Russian)
- G. P. Chimata, and C. J. Schwartz, Investigation of friction mechanisms in finger pad sliding against surfaces of varying roughness, Biotribology, vol. 3, pp. 11–19, 2015. DOI: https://doi.org/10.1016/j.biotri.2015.09.002.
- M. Adams, B. Briscoe, and S. Johnson, Friction and lubrication of human skin, Tribol. Lett., vol. 26, no. 3, pp. 239–253, 2007. DOI: https://doi.org/10.1007/s11249-007-9206-0.
- G. W. Stachowiak, Engineering tribology [M], third Edition, pp 553–572, Elsevier Inc. Netherlands 2006
- H. Jun, Pu theoretical research and life estimation of unrotating wire rope used in crane and its application. [D], Doctor. South China University of Technology, China 2012.
- J. Zhang, Friction and wear characteristics of braided wire rope traction[D], Master's degree, Study Jinan University, 2019.
- M. Ramezani, T. Neitzert, T. Pasang, and M. A. Sellès, Characterization of friction behavior of AZ80 and ZE10 magnesium alloys under lubricated contact condition by strip draw and bend test, Int. J. Mach. Tools Manuf., vol. 85, pp. 70–78, 2014. DOI: https://doi.org/10.1016/j.ijmachtools.2014.05.006.
- J. Hale, R. Lewis, and M. J. Carré, Rubber friction and the effect of shape, Tribol. Int., vol. 141, pp. 105911, 2020. DOI: https://doi.org/10.1016/j.triboint.2019.105911.
- G. Fortunato, V. Ciaravola, A. Furno, B. Lorenz, and B. N. J. Persson, The general theory of frictional heating with application to rubber friction, J Phys Condens Matter., vol. 27, no. 17, pp. 175008, 2015. DOI: https://doi.org/10.1088/0953-8984/27/17/175008.
- B. N. J. Persson, Theory of rubber friction and contact mechanics, J Chem Phys., vol 115, pp. 3840, 2001. DOI: https://doi.org/10.1063/1.1388626.
- G. Heinrich, and M. Klüppel, Rubber friction, tread deformation and tire traction, Wear, vol. 265, no. 7-8, pp. 1052–1060, 2008. DOI: https://doi.org/10.1016/j.wear.2008.02.016.
- X. Xu, et al., Intelligent 3D data extraction method for deformation analysis of, Compos. Struct., vol. 203, pp. 254–258, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.07.003.
- M. A. Bueno, R. Bocquet, M. Tourlonias, R. M. Rossi, and S. Derler, Study of friction mechanisms of hairy textile fabrics, Wear, vol. 303, no. 1-2, pp. 343–353, 2013. DOI: https://doi.org/10.1016/j.wear.2013.03.035.
- B. S. Gupta, Friction in textile materials, CRC Press, Cambridge, 2008.
- N. Pan, J.-H. H. He, and J. Yu, Fibrous materials as soft matter, Text. Res. J., vol. 77, no. 4, pp. 205–213, 2007. DOI: https://doi.org/10.1177/0040517507076748.
- X. Xu, H. Yang, and B. Kargoll, Robust and automatic modeling of tunnel structures based on terrestrial laser scanning measurement, Int. J. Distrib. Sens. Netw., vol. 15, no. 11, pp. 155014771988488, 2019. DOI: https://doi.org/10.1177/1550147719884886.
- X. Xu, and H. Yang, Vision measurement of tunnel structures with robust modelling and deep learning algorithms, Sensors., vol. 20, no. 17, pp. 4945, 2020. DOI: https://doi.org/10.3390/s20174945.
- X. Xu, N. Fallahi, and H. Yang, Efficient CUF-based FEM analysis of thin-wall structures with Lagrange polynomial expansion, Mechanics of Advanced Materials and Structures, [J], pp 1–22. 2020. DOI: https://doi.org/10.1080/15376494.2020.1818331.
- S. Zheng, On industrial intelligence technology and applications, Shanghai Science and Technology Press, Shanghai, pp. 250–251, 2019.
- J. Li, et al., Optimal design of structural parameters for calculation formula of friction force of et al. soft shaft, J. Guangxi Univ. Sci. Technol., vol. 027, pp. 21–25, 2016.
- B. Qin, W. Qin, and X. Lin, Application of multi-group real number coding genetic algorithm in optimization of multi-peak function, J. Guangxi Univ. Sci. Technol., vol. 26, pp. 13–15, 2015.