References
- M. Shakeri, R. Mirzaeifar, and S. Salehghaffari, New insights into the collapsing of cylindrical thin-walled tubes under axial impact load, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 221, no. 8, pp. 869–885, 2007. DOI: https://doi.org/10.1243/09544062JMES562.
- A. Ghamarian, and MTahaye Abadi, Axial crushing analysis of end-capped circular tubes, Thin-Walled Struct., vol. 49, no. 6, pp. 743–752, 2011. DOI: https://doi.org/10.1016/j.tws.2011.01.006.
- G. Lu, T.X. Yu, Energy absorption of structures and materials, Woodhead Publishing Ltd., Cambridge, 2003.
- T. Wierzbicki, S. U. Bhat, W. Abramowicz, and D. Brodkin, Alexander revisited—A two folding elements model of progressive crushing of tubes, Int. J. Solids Struct., vol. 29, no. 24, pp. 3269–3288, 1992. DOI: https://doi.org/10.1016/0020-7683(92)90040-Z.
- W. Abramowicz and N. Jones, Dynamic progressive buckling of circular and square tubes, Int. J. Impact Eng., vol. 4, no. 4, pp. 243–270, 1986. DOI: https://doi.org/10.1016/0734-743X(86)90017-5.
- S. R. Guillow, G. Lu, and R. H. Grzebieta, Quasi-static axial compression of thin-walled circular aluminium tubes, Int. J. Mech. Sci., vol. 43, no. 9, pp. 2103–2123, 2001. DOI: https://doi.org/10.1016/S0020-7403(01)00031-5.
- K. R. F. Andrews, G. L. England, and E. Ghani, Classification of the axial collapse of cylindrical tubes under quasi-static loading, Int. J. Mech. Sci., vol. 25, no. 9-10, pp. 687–696, 1983. DOI: https://doi.org/10.1016/0020-7403(83)90076-0.
- V. A. Krysko, J. Awrejcewicz, and N. E. Saveleva, Stability, bifurcation and chaos of closed flexible cylindrical shells, Int. J. Mech. Sci., vol. 50, no. 2, pp. 247–274, 2008. DOI: https://doi.org/10.1016/j.ijmecsci.2007.07.006.
- J. Awrejcewicz, V. A. Krysko, and G. G. Narkaitis, Bifurcations of a thin plate-strip excited transversally and axially, Nonlinear Dyn., vol. 32, no. 2, pp. 187–209, 2003. DOI: https://doi.org/10.1023/A:1024458814785.
- J. Awrejcewicz, A. V. Krysko, M. V. Zhigalov, and V. A. Krysko, Chaotic dynamic buckling of rectangular spherical shells under harmonic lateral load, Comput. Struct., vol. 191, pp. 80–99, 2017. DOI: https://doi.org/10.1016/j.compstruc.2017.06.011.
- F. Alhussainy, M. N. Sheikh, and M. N. S. Hadi, Behaviour of small diameter steel tubes under axial compression, Structures, vol. 11, pp. 155–163, 2017. DOI: https://doi.org/10.1016/j.istruc.2017.05.006.
- X. Xu, J. Sun, and C. W. Lim, An analytical symplecticity method for axial compression plastic buckling of cylindrical shells, J. Press. Vessel Technol. Trans. ASME., vol. 135, pp. 1–8, 2013.
- K. A. Seffen and S. V. Stott, Surface texturing through cylinder buckling, J. Appl. Mech. Trans. ASME., vol. 81, pp. 1–7, 2014.
- A. Alavi Nia and M. Parsapour, Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections, Thin-Walled Struct., vol. 74, pp. 155–165, 2014. DOI: https://doi.org/10.1016/j.tws.2013.10.005.
- Z. Fan, G. Lu, and K. Liu, Quasi-static axial compression of thin-walled tubes with different cross-sectional shapes, Eng. Struct., vol. 55, pp. 80–89, 2013. DOI: https://doi.org/10.1016/j.engstruct.2011.09.020.
- F. Tarlochan, F. Samer, A. M. S. Hamouda, S. Ramesh, and K. Khalid, Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces, Thin-Walled Struct., vol. 71, pp. 7–17, 2013. DOI: https://doi.org/10.1016/j.tws.2013.04.003.
- S. Pirmohammad and S. E. Marzdashti, Crushing behavior of new designed multi-cell members subjected to axial and oblique quasi-static loads, Thin-Walled Struct., vol. 108, pp. 291–304, 2016. DOI: https://doi.org/10.1016/j.tws.2016.08.023.
- M. Abada and A. Ibrahim, Hybrid multi-cell thin-walled tubes for energy absorption applications: Blast shielding and crashworthiness, Compos. Part B Eng., vol. 183, pp. 107720, 2020. DOI: https://doi.org/10.1016/j.compositesb.2019.107720.
- T. Chen, Y. Zhang, J. Lin, and Y. Lu, Theoretical analysis and crashworthiness optimization of hybrid multi-cell structures, Thin-Walled Struct., vol. 142, pp. 116–131, 2019. DOI: https://doi.org/10.1016/j.tws.2019.05.002.
- E. Acar, M. Altin, and M. A. Güler, Evaluation of various multi-cell design concepts for crashworthiness design of thin-walled aluminum tubes, Thin-Walled Struct., vol. 142, pp. 227–235, 2019. DOI: https://doi.org/10.1016/j.tws.2019.05.012.
- W. Ma, Z. Li, and S. Xie, Crashworthiness analysis of thin-walled bio-inspired multi-cell corrugated tubes under quasi-static axial loading, Eng. Struct., vol. 204, pp. 110069, 2020. DOI: https://doi.org/10.1016/j.engstruct.2019.110069.
- T. A. Sebaey, D. Kumar Rajak, and H. Mehboob, Internally stiffened foam-filled carbon fiber reinforced composite tubes under impact loading for energy absorption applications, Compos. Struct., vol. 255, pp. 112910, 2021. DOI: https://doi.org/10.1016/j.compstruct.2020.112910.
- R. Yang Yao, G. Sheng Yin, W. Qian Hao, Z. Yu Zhao, X. Li, and X. Li Qin, Axial buckling modes and crashworthiness of circular tube with external linear gradient grooves, Thin-Walled Struct., vol. 134, pp. 395–406, 2019. DOI: https://doi.org/10.1016/j.tws.2018.10.022.
- S. E. Alkhatib, M. S. Matar, F. Tarlochan, O. Laban, A. S. Mohamed, and N. Alqwasmi, Deformation modes and crashworthiness energy absorption of sinusoidally corrugated tubes manufactured by direct metal laser sintering, Eng. Struct., vol. 201, pp. 109838, 2019. DOI: https://doi.org/10.1016/j.engstruct.2019.109838.
- S. Goyal, C. S. Anand, S. K. Sharma, and R. C. Sharma, Crashworthiness analysis of foam filled star shape polygon of thin-walled structure, Thin-Walled Struct., vol. 144, pp. 106312, 2019. DOI: https://doi.org/10.1016/j.tws.2019.106312.
- A. Sadighi, A. Eyvazian, M. Asgari, and A. M. Hamouda, A novel axially half corrugated thin-walled tube for energy absorption under Axial loading, Thin-Walled Struct., vol. 145, pp. 106418, 2019. DOI: https://doi.org/10.1016/j.tws.2019.106418.
- A. Baroutaji, M. Sajjia, and A. G. Olabi, On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments, Thin-Walled Struct., vol. 118, pp. 137–163, 2017. DOI: https://doi.org/10.1016/j.tws.2017.05.018.
- G. Sun, S. Li, Q. Liu, G. Li, and Q. Li, Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes, Compos. Struct., vol. 152, pp. 969–993, 2016. DOI: https://doi.org/10.1016/j.compstruct.2016.06.019.
- J. Song, S. Xu, L. Xu, J. Zhou, and M. Zou, Experimental study on the crashworthiness of bio-inspired aluminum foam-filled tubes under axial compression loading, Thin-Walled Struct., vol. 155, pp. 106937, 2020. DOI: https://doi.org/10.1016/j.tws.2020.106937.
- G. Sun, Z. Wang, H. Yu, Z. Gong, and Q. Li, Experimental and numerical investigation into the crashworthiness of metal-foam-composite hybrid structures, Compos. Struct., vol. 209, pp. 535–547, 2019. DOI: https://doi.org/10.1016/j.compstruct.2018.10.051.
- D. K. Rajak, N. N. Mahajan, and E. Linul, Crashworthiness performance and microstructural characteristics of foam-filled thin-walled tubes under diverse strain rate, J. Alloys Compd., vol. 775, pp. 675–689, 2019. DOI: https://doi.org/10.1016/j.jallcom.2018.10.160.
- L. J. Gibson and M. F. Ashby, Cellular Solids: Structure and Properties, Cambridge University Press, Cambridge, 1997.
- A. G. Hanssen, M. Langseth, and O. S. Hopperstad, Static and dynamic crushing of circular aluminum extrusions with aluminum foam filler, Int. J. Impact Eng., vol. 24, no. 4, pp. 347–383, 2000. DOI: https://doi.org/10.1016/S0734-743X(99)00169-4.
- A. K. Toksoy, and M. Güden, The strengthening effect of polystyrene foam filling in aluminum thin-walled cylindrical tubes, Thin-Walled Struct., vol. 43, no. 2, pp. 333–350, 2005. DOI: https://doi.org/10.1016/j.tws.2004.07.007.
- H. R. Zarei, and M. Kröger, Optimization of the foam-filled aluminum tubes for crush box application, Thin-Walled Struct., vol. 46, no. 2, pp. 214–221, 2008. DOI: https://doi.org/10.1016/j.tws.2007.07.016.
- Y. Tong, J. Liu, and S. Liu, China is implementing “Garbage Classification” action, Environ. Pollut., vol. 259, pp. 2019–2020, 2020.
- A. Conroy, S. Halliwell, and T. Reynolds, Composite recycling in the construction industry, Compos. Part A Appl. Sci. Manuf., vol. 37, no. 8, pp. 1216–1222, 2006. DOI: https://doi.org/10.1016/j.compositesa.2005.05.031.
- N. O. Cabrera, B. Alcock, and T. Peijs, Design and manufacture of all-PP sandwich panels based on co-extruded polypropylene tapes, Compos. Part B Eng., vol. 39, no. 7-8, pp. 1183–1195, 2008. DOI: https://doi.org/10.1016/j.compositesb.2008.03.010.
- P. R. Oliveira, T. H. Panzera, R. T. Freire, and F. Scarpa, Sustainable sandwich structures made from bottle caps core and aluminium skins: A statistical approach, Thin-Walled Struct., vol. 130, pp. 362–371, 2018. DOI: https://doi.org/10.1016/j.tws.2018.06.003.
- P. R. Oliveira, M. May, T. H. Panzera, F. Scarpa, and S. Hiermaier, Improved sustainable sandwich panels based on bottle caps core, Compos. Part B Eng., vol. 199, pp. 108165, 2020. DOI: https://doi.org/10.1016/j.compositesb.2020.108165.
- P. R. Oliveira, A. M. S. Bonaccorsi, T. H. Panzera, A. L. Christoforo, and F. Scarpa, Sustainable sandwich composite structures made from aluminium sheets and disposed bottle caps, Thin-Walled Struct., vol. 120, pp. 38–45, 2017. DOI: https://doi.org/10.1016/j.tws.2017.08.013.
- S. Palanivelu, et al., Low velocity axial impact crushing performance of empty recyclable metal beverage cans, Int. J. Impact Eng., vol. 38, no. 7, pp. 622–636, 2011. DOI: https://doi.org/10.1016/j.ijimpeng.2011.02.008.
- S. Palanivelu, et al., Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure, Eng. Struct., vol. 33, no. 6, pp. 1966–1987, 2011. DOI: https://doi.org/10.1016/j.engstruct.2011.02.034.
- H. Ousji, B. Belkassem, L. Pyl, and J. Vantomme, Air-blast loading on empty metallic beverage can used as sacrificial cladding: Experimental, analytical and numerical study, Eng. Struct., vol. 204, pp. 109979, 2020. DOI: https://doi.org/10.1016/j.engstruct.2019.109979.
- C. R. Calladine and R. W. English, Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure, Int. J. Mech. Sci., vol. 26, no. 11-12, pp. 689–701, 1984. DOI: https://doi.org/10.1016/0020-7403(84)90021-3.
- H. N. R. Wagner and C. Hühne, Robust knockdown factors for the design of cylindrical shells under axial compression: Potentials, practical application and reliability analysis, Int. J. Mech. Sci., vol. 135, pp. 410–430, 2018. DOI: https://doi.org/10.1016/j.ijmecsci.2017.11.020.
- A. Evkin, V. Krasovsky, O. Lykhachova, and V. Marchenko, Local buckling of axially compressed cylindrical shells with different boundary conditions, Thin-Walled Struct., vol. 141, pp. 374–388, 2019. DOI: https://doi.org/10.1016/j.tws.2019.04.039.
- D. Karagiozova, M. Alves, and N. Jones, Inertia effects in axisymmetrically deformed cylindrical shells under axial impact, Int. J. Impact Eng., vol. 24, no. 10, pp. 1083–1115, 2000. DOI: https://doi.org/10.1016/S0734-743X(00)00028-2.
- L. N. S. Chiu, et al., Crush responses of composite cylinder under quasi-static and dynamic loading, Compos. Struct., vol. 131, pp. 90–98, 2015., DOI: https://doi.org/10.1016/j.compstruct.2015.04.057.
- A. A. Singace, Axial crushing analysis of tubes deforming in the multi-lobe mode, Int. J. Mech. Sci., vol. 41, no. 7, pp. 865–890, 1999. DOI: https://doi.org/10.1016/S0020-7403(98)00052-6.
- J. H. Ku, K. S. Seo, S. W. Park, and Y. J. Kim, Axial crushing behavior of the intermittent tack-welded cylindrical tubes, Int. J. Mech. Sci., vol. 43, no. 2, pp. 521–542, 2001. DOI: https://doi.org/10.1016/S0020-7403(99)00120-4.