Investigations on crush behavior and energy absorption characteristics of GFRP composite conical frusta with a cutout under axial compression loading

References

• H. Han, F. Taheri, and N. Pegg, Crushing behaviors and energy absorption efficiency of hybrid pultruded and ±45°braided tubes, Mech. Adv. Mater., vol. 18, no. 4, pp. 287–300, 2011. DOI: 10.1080/15376494.2010.506103.
   Web of Science ®Google Scholar
• Z. Wang, X. Wang, T. Gao, and C. Shi, Mechanical behavior and deformation mechanism of triply periodic minimal surface sheet under compressive loading, Mech. Adv. Mater. Struct., pp. 1–14, 2020. DOI: 10.1080/15376494.2020.1829756.
   Web of Science ®Google Scholar
• M. A. Guler, M. E. Cerit, B. Bayram, B. Gerceker, and E. Karakaya, The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading, Int. J. Crashworthiness., vol. 15, no. 4, pp. 377–390, 2010. DOI: 10.1080/13588260903488750.
   Web of Science ®Google Scholar
• H. Han, F. Taheri, and N. Pegg, Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout, Thin-Wall Struct., vol. 45, no. 3, pp. 283–300, 2007. DOI: 10.1016/j.tws.2007.02.010.
   Web of Science ®Google Scholar
• R. Kolahchi, S.-P. Zhu, B. Keshtegar, and N.-T. Trung, Dynamic buckling optimization of laminated aircraft conical shells with hybrid nanocomposite martial, Aerosp. Sci. Technol., vol. 98, pp. 105656, 2020. DOI: 10.1016/j.ast.2019.105656.
   Web of Science ®Google Scholar
• S. H. Hashemi-Karouei, A. M. Goudarzi, F. Morshedsolouk, and S. S. M. Ajarostaghi, Analytical and finite element investigations of the cross-arranged trapezoidal- and sinusoidal-corrugated-cores panels. Mech. Adv. Mater. Struct., pp. 1–14, 2020. DOI: 10.1080/15376494.2020.1834652.
   Web of Science ®Google Scholar
• V. V. Karpov, Models of the shells having ribs, reinforcement plates and cutouts, Int. J. Solids Struct., vol. 146, pp. 117–135, 2018. DOI: 10.1016/j.ijsolstr.2018.03.024.
   Web of Science ®Google Scholar
• S. Yao, Z. Li, W. Ma, and P. Xu, Crashworthiness analysis of a straight-tapered shrink tube, Int J Mech Sci., vol. 157-158, pp. 512–527, 2019. DOI: 10.1016/j.ijmecsci.2019.04.058.
   Web of Science ®Google Scholar
• M. Ferdynus, M. Kotełko, and M. Urbaniak, Crashworthiness performance of thin-walled prismatic tubes with corner dents under axial impact-Numerical and experimental study, Thin-Wall Struct., vol. 144, pp. 106239, 2019. DOI: 10.1016/j.tws.2019.106239.
   Web of Science ®Google Scholar
• F. Shadmehri, S. V. Hoa, and M. Hojjati, Buckling of conical composite shells, Compos. Struct., vol. 94, no. 2, pp. 787–792, 2012. DOI: 10.1016/j.compstruct.2011.09.016.
   Web of Science ®Google Scholar
• M. Kathiresan, K. Manisekar, and V. Manikandan, Performance analysis of fibre metal laminated thin conical frusta under axial compression, Compos. Struct., vol. 94, no. 12, pp. 3510–3519, 2012. DOI: 10.1016/j.compstruct.2012.05.026.
   Web of Science ®Google Scholar
• M. Kathiresan, K. Manisekar, and V. Manikandan, Crashworthiness analysis of glass fibre/epoxy laminated thin-walled composite conical frusta under axial compression, Compos. Struct., vol. 108, pp. 584–599, 2014. https://doi.org/10.1016/j.compstruct.2013.09.060. DOI: 10.1016/j.compstruct.2013.09.060.
   Web of Science ®Google Scholar
• M. Kathiresan, and K. Manisekar K, Axial crush behaviours and energy absorption characteristics of aluminium and E-glass/epoxy over-wrapped aluminium conical frusta under low-velocity impact loading, Compos. Struct., vol. 136, pp. 86–100, 2016. DOI: 10.1016/j.compstruct.2015.09.052.
   Web of Science ®Google Scholar
• M. Kathiresan, and K. Manisekar, Low-velocity axial collapse behavior of E-glass fiber/epoxy composite conical frusta, Compos. Struct., vol. 166, pp. 1–11, 2017. DOI: 10.1016/j.compstruct.2017.01.041.
   Web of Science ®Google Scholar
• A. Taştan, E. Acar, M. A. Güler, and Ü. Kılınçkaya, Optimum crashworthiness design of tapered thin-walled tubes with lateral circular cutouts, Thin-Wall Struct., vol. 107, pp. 543–553, 2016. DOI: 10.1016/j.tws.2016.07.018.
   Web of Science ®Google Scholar
• M. Kathiresan, Influence of shape, size and location of cutouts on crashworthiness performance of aluminium conical frusta under quasi-static axial compression, Thin-Wall Struct., vol. 154, pp. 106793, 2020. DOI: 10.1016/j.tws.2020.106793.
   Web of Science ®Google Scholar
• S. P. Ng, K. Lau, and P. Tse, 3D finite element analysis of tensile notched strength of 2/2 twill weave fabric composites with drilled circular hole, Compos B Eng., vol. 31, no. 2, pp. 113–132, 2000. DOI: 10.1016/S1359-8368(99)00078-5.
   Web of Science ®Google Scholar
• G. K. Vinay, J. R. Navin, J. R. Eric, and A. R. Damodar, Intralaminar and interlaminar progressive failure analyses of composite panels with circular cutouts, Compos. Struct., vol. 64, no. 1, pp. 91–105, 2004. DOI: 10.1016/S0263-8223(03)00217-4.
   Web of Science ®Google Scholar
• P. Jain, and A. Kumar, Post-buckling response of square laminates with a central circular/elliptical cutout, Compos Struct., vol. 65, no. 2, pp. 179–185, 2004. DOI: 10.1016/j.compstruct.2003.10.014.
   Web of Science ®Google Scholar
• M. W. Hilburger, and J. H. Starnes, Jr. Buckling behavior of compression-loaded composite cylindrical shells with reinforced cutouts, Int. J. Nonl. Mech., vol. 40, no. 7, pp. 1005–1021, 2005. DOI: 10.1016/j.ijnonlinmec.2005.02.001.
   Web of Science ®Google Scholar
• V. Anil, C. S. Upadhyay, and N. G. R. Iyengar, Stability analysis of composite laminate with and without rectangular cutout under biaxial loading, Compos Struct., vol. 80, no. 1, pp. 92–104, 2007. DOI: 10.1016/j.compstruct.2006.04.088.
   Web of Science ®Google Scholar
• D. K. Nageswara Rao, M. Ramesh Babu, K. Raja Narender Reddy, and D. Sunil, Stress around square and rectangular cutouts in symmetric laminates, Compos Struct., vol. 92, no. 12, pp. 2845–2859, 2010. DOI: 10.1016/j.compstruct.2010.04.010.
   Web of Science ®Google Scholar
• D. Kumar, and S. B. Singh, Postbuckling strengths of composite laminate with various shaped cutouts under in-plane shear, Compos Struct., vol. 92, no. 12, pp. 2966–2978, 2010. DOI: 10.1016/j.compstruct.2010.05.008.
   Web of Science ®Google Scholar
• M. Aydin Komur, F. Sen, A. Atas, and N. Arslan, Buckling analysis of laminated composite plates with an elliptical/circular cutout using FEM, Adv. EngSoftw., vol. 41, no. 2, pp. 161–164, 2010. DOI: 10.1016/j.advengsoft.2009.09.005.
   Web of Science ®Google Scholar
• S. Shi, Z. Sun, M. Ren, H. Chen, and X. Hu, Buckling response of advanced grid stiffened carbon–fiber composite cylindrical shells with reinforced cutouts, Compos: Part B., vol. 44, no. 1, pp. 26–33, 2013. DOI: 10.1016/j.compositesb.2012.07.044.
   Web of Science ®Google Scholar
• E. G. Koricho, A. Khomenko, T. Fristedt, and M. Haq, Innovative tailored fiber placement technique for enhanced damage resistance in notched composite laminate, Compos Struct., vol. 120, pp. 378–385, 2015. DOI: 10.1016/j.compstruct.2014.10.016.
   Web of Science ®Google Scholar
• Z. C. Su, T. E. Tay, M. Ridha, and B. Y. Chen, Progressive damage modeling of open-hole composite laminates under compression, Compos Struct., vol. 122, pp. 507–517, 2015. DOI: 10.1016/j.compstruct.2014.12.022.
   Web of Science ®Google Scholar
• X. Li, W. Gao, and W. Liu, Post-buckling progressive damage of CFRP laminates with a large-sized elliptical cutout subjected to shear loading, Compos Struct., vol. 128, pp. 313–321, 2015. DOI: 10.1016/j.compstruct.2015.03.038.
   Web of Science ®Google Scholar
• X. Li, W. Gao, and W. Liu, The bearing behavior and failure characteristic of CFRP laminate with cutout under shearing load: Part II. Numerical simulations, Compos Struct., vol. 141, pp. 366–374, 2016. DOI: 10.1016/j.compstruct.2016.01.034.
   Web of Science ®Google Scholar
• Q. Liu, J. Ma, X. Xu, Y. Wu, and Q. Li, Load bearing and failure characteristics of perforated square CFRP tubes under axial crushing, Compos Struct., vol. 160, pp. 23–35, 2017. DOI: 10.1016/j.compstruct.2016.10.032.
   Web of Science ®Google Scholar
• S. Anitha Priya Dharshani, A. Meher Prasad, and R. Sundaravadivelu, Analysis of GFRP stiffened composite plates with rectangular cutout, Compos. Struct., vol. 169, pp. 42–51, 2017. DOI: 10.1016/j.compstruct.2016.10.054.
   Web of Science ®Google Scholar
• F. Taheri-Behrooz, M. Omidi, and M. M. Shokrieh, Experimental and numerical investigation of buckling behavior of composite cylinders with cutout, Thin-Wall Struct., vol. 116, pp. 136–144, 2017. DOI: 10.1016/j.tws.2017.03.009.
   Web of Science ®Google Scholar
• D. Pastorino, A. Blázquez, B. López-Romano, and F. París, Closed-form methodology for stress analysis of composite plates with cutouts and non-uniform lay-up, Compos. Struct., vol. 212, pp. 389–397, 2019. DOI: 10.1016/j.compstruct.2019.01.013.
   Web of Science ®Google Scholar
• P. Hao, Y. Wang, Z. Wu, X. Liu, B. Wang, and W. Huang, Progressive optimization of complex shells with cutouts using a smart design domain method, Comput. Method Appl. M., vol. 362, pp. 112814, 2020. DOI: 10.1016/j.cma.2019.112814.
   Web of Science ®Google Scholar
• R. Khakimova, R. Degenhardt, and D. Wilcken, Experimental and numerical investigation of CFRP cylinders with circular cutouts under axial compression, Thin–Wall Struct., vol. 147, pp. 106526, 2020. DOI: 10.1016/j.tws.2019.106526.
   Web of Science ®Google Scholar
• Q. Liu, K. Liufu, Z. Cui, J. Li, J. Fang, and Q. Li, Multiobjective optimization of perforated square CFRP tubes for crashworthiness, Thin–Wall Struct., vol. 149, pp. 106628, 2020. DOI: 10.1016/j.tws.2020.106628.
   Web of Science ®Google Scholar
• K. Tian, X. Ma, Z. Li, S. Lin, B. Wang, and A. M. Waas, A multi-fidelity competitive sampling method for surrogate-based stacking sequence optimization of composite shells with multiple cutouts, Int. J. Solids Struct., vol. 193–194, pp. 1–12, 2020. DOI: 10.1016/j.ijsolstr.2020.02.007.
   Web of Science ®Google Scholar
• Z. Song, S. Ming, T. Li, K. Du, C. Zhou, and B. Wang, Improving the energy absorption capacity of square CFRP tubes with cutout by introducing chamfer, Int. J. Mech. Sci., vol. 189, pp. 105994, 2021. DOI: 10.1016/j.ijmecsci.2020.105994.
   Web of Science ®Google Scholar
• Abaqus® 6.7-1 user manual.
   Google Scholar
• M. Kathiresan, Effects of cutout and impact loading condition on crashworthiness characteristics of conical frusta, Int. J. Crashworthiness., vol. 202, pp. 1–21, DOI: 10.1080/13588265.2021.1903280.
   Google Scholar
• S. Charoenphan, L. C. Bank, and M. E. Plesha, Progressive tearing failure in pultruded composite material tubes, Compos. Struct., vol. 63, no. 1, pp. 45–52, 2004. DOI: 10.1016/S0263-8223(03)00130-2.
   Web of Science ®Google Scholar
• Z. Hashin, and A. Rotem, A fatigue criterion for fibre-reinforced materials, J. Compos. Mater., vol. 7, no. 4, pp. 448–464, 1973. DOI: 10.1177/002199837300700404.
   Web of Science ®Google Scholar
• Z. Hashin, Failure criteria for unidirectional fibre composites, J. Appl. Mech., vol. 47, no. 2, pp. 329–334, 1980. DOI: 10.1115/1.3153664.
   Web of Science ®Google Scholar
• J. S. Lin, X. Wang, C. Q. Fang, and X. Huang, Collapse loading and energy absorption of fiber-reinforced conical shells, Compos Part B., vol. 74, pp. 178–189, 2015. DOI: 10.1016/j.compositesb.2015.01.016.
   Web of Science ®Google Scholar
• S. H. Xin, and H. M. Wen, A progressive damage model for fiber reinforced plastic composites subjected to impact loading, Int. J. Impact Eng., vol. 75, pp. 40–52, 2015. DOI: 10.1016/j.ijimpeng.2014.07.014.
   Web of Science ®Google Scholar
• I. Lapczyk, and J. A. Hurtado, Progressive damage modeling in fiber-reinforced materials, Compos. Part A. Appl. Sci. Manuf., vol. 38, no. 11, pp. 2333–2341, 2007. DOI: 10.1016/j.compositesa.2007.01.017.
   Web of Science ®Google Scholar
• H. El-Hage, P. K. Mallick, and N. Zamani, A numerical study on the quasi-static axial crush characteristics of square aluminum–composite hybrid tubes, Compos. Struct., vol. 73, no. 4, pp. 505–514, 2006. DOI: 10.1016/j.compstruct.2005.03.004.
   Web of Science ®Google Scholar
• L. Mirfendereski, M. Salimi, and S. Ziaei-Rad, Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings, Int. J. Mech. Sci., vol. 50, no. 6, pp. 1042–1057, 2008. DOI: 10.1016/j.ijmecsci.2008.02.007.
   Web of Science ®Google Scholar