Extended spring–mass method for joint stiffness prediction of single-lap multi-bolt composite joints considering assembly gap and gap shimming

References

• M. Saadat and C. Cretin, Dimensional variations during Airbus wing assembly, Assem. Autom., vol. 22, no. 3, pp. 270–276, 2002. DOI: 10.1108/01445150210436482.
   Web of Science ®Google Scholar
• I. Baran, K. Cinar, N. Ersoy, R. Akkerman, and J.H. Hattel, A review on the mechanical modeling of composite manufacturing processes, Arch. Comput. Methods Eng., vol. 24, no. 2, pp. 365–395, 2017. DOI: 10.1007/s11831-016-9167-2.
   PubMed Web of Science ®Google Scholar
• Z. Yuan, Y. Wang, X. Peng, J. Wang, and S. Wei, An analytical model on through-thickness stresses and warpage of composite laminates due to tool–part interaction, Composites Part B: Eng., vol. 91, pp. 408–413, 2016. DOI: 10.1016/j.compositesb.2016.01.016.
   Web of Science ®Google Scholar
• M.H. Hassan, A. R. Othman, and S. Kamaruddin, A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures, Int. J. Adv. Manuf. Technol., vol. 91, pp. 4081–4094, 2017.
   Web of Science ®Google Scholar
• J. Goering, R. Bohlmann, S. Wanthal, E. Kautz, and L. M. Neri, Assembly induced delaminations in composite structures. In: Ninth DOD (NASA) FAA Conference on Fibrous Composites in Structural Design., pp. 1353–1377, 1992.
   Google Scholar
• F.C. Campbell, Manufacturing Processes for Advanced Composites, London, Elsevier Science, 2003.
   Google Scholar
• B. Chouvion, A. Popov, S. Ratchev, C. Mason, and M. Summers, Interface management in wing-box assembly, SAE Technical Paper 2011-01-2640, 2011.
   Google Scholar
• C. Hühne, A.K. Zerbst, G. Kuhlmann, C. Steenbock, and R. Rolfes, Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models, Compos. Struct., vol. 92, no. 2, pp. 189–200, 2010. DOI: 10.1016/j.compstruct.2009.05.011.
   Web of Science ®Google Scholar
• L. Liu, The influence of the substrate’s stiffness on the liquid shim effect in composite-to-titanium hybrid bolted joints, Proc. Inst. Mech. Eng., Part G: J. Aerospace Eng., vol. 228, no. 3, pp. 470–479, 2014. DOI: 10.1177/0954410013476612.
   Web of Science ®Google Scholar
• L. Liu, J. Zhang, K. Chen, H. Wang, and M. Liu, Experimental and numerical analysis of the mechanical behavior of composite-to-titanium bolted joints with liquid shim, Aerosp. Sci. Technol., vol. 49, pp. 167–172, 2016. DOI: 10.1016/j.ast.2015.11.029.
   Web of Science ®Google Scholar
• A.J. Comer, J.X. Dhôte, W.F. Stanley, and T.M. Young, Thermo-mechanical fatigue analysis of liquid shim in mechanically fastened hybrid joints for aerospace applications, Compos. Struct., vol. 94, no. 7, pp. 2181–2187, 2012. DOI: 10.1016/j.compstruct.2012.01.008.
   Web of Science ®Google Scholar
• J.X. Dhôte, A.J. Comer, W.F. Stanley, and T.M. Young, Study of the effect of liquid shim on single-lap joint using 3D digital image correlation, Compos. Struct., vol. 96, pp. 216–225, 2013. DOI: 10.1016/j.compstruct.2012.08.058.
   Web of Science ®Google Scholar
• J.X. Dhôte, A.J. Comer, W.F. Stanley, and T.M. Young, Investigation into compressive properties of liquid shim for aerospace bolted joints, Compos. Struct., vol. 109, pp. 224–230, 2014. DOI: 10.1016/j.compstruct.2013.10.041.
   Web of Science ®Google Scholar
• Y. Zhai, D. Li, X. Li, and L. Wang, An experimental study on the effect of joining interface condition on bearing response of single-lap, countersunk composite-aluminum bolted joints, Compos. Struct., vol. 134, pp. 190–198, 2015. DOI: 10.1016/j.compstruct.2015.08.078.
   Web of Science ®Google Scholar
• M.B. Tate and S.J. Rosenfeld, Preliminary investigation of the loads carried by individual bolts in bolted joints, NACA-TN-1051, 1946.
   Google Scholar
• W.D. Nelson, B.L. Bunin, and L.J. Hart-Smith, Critical joints in large composite aircraft structure. NASA Contractor Report 3710, 1983.
   Google Scholar
• M.A. McCarthy, C.T. McCarthy, and G.S. Padhi, A simple method for determining the effects of bolt–hole clearance on load distribution in single-column multi-bolt composite joints, Compos. Struct., vol. 73, no. 1, pp. 78–87, 2006. DOI: 10.1016/j.compstruct.2005.01.028.
   Web of Science ®Google Scholar
• C.T. McCarthy and P.J. Gray, An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints, Compos. Struct., vol. 93, no. 2, pp. 287–298, 2011. DOI: 10.1016/j.compstruct.2010.09.017.
   Web of Science ®Google Scholar
• A. Olmedo, C. Santiuste, and E. Barbero, An analytical model for the secondary bending prediction in single-lap composite bolted-joints, Compos. Struct., vol. 111, pp. 354–361, 2014. DOI: 10.1016/j.compstruct.2014.01.015.
   Web of Science ®Google Scholar
• A. Olmedo, Development of predictive models of mechanical behaviour of composite joints (in Spanish) [Doctor's thesis], 2015.
   Google Scholar
• Y. Yang, X. Liu, Y.-Q. Wang, et al., An enhanced spring-mass model for stiffness prediction in single-lap composite joints with considering assembly gap and gap shimming, Compos. Struct., vol. 187, pp. 18–26, 2018. DOI: 10.1016/j.compstruct.2017.12.041.
   Web of Science ®Google Scholar
• ASTM D5961/D5961M, Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates, American Society for Testing and Materials, 2013.
   Google Scholar
• C. Qiu, Z. Guan, S. Du, and Z. Li, An improved model for predicting stiffness of single-lap composites bolted joints using Matlab/Simulink, Mech. Adv. Mater. Struct., vol. 28, no. 14, pp. 1434–1444, 2021. DOI: 10.1080/15376494.2019.1675107.
   Web of Science ®Google Scholar
• S.A. Nassar and A. Abboud, An improved stiffness model for bolted joints, J. Mech. Design., vol. 131, no. 12, pp. 1–11, 2009. DOI: 10.1115/1.4000212.
   Web of Science ®Google Scholar
• J. Reddy, Mechanics of Laminated Composite Plates and Shells: theory and Analysis, CRC Press, Boca Raton, 2004.
   Google Scholar
• ASTM D7264/D7264M, Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials, American Society for Testing and Materials, 2015.
   Google Scholar
• B. Mandal and A. Chakrabarti, A simple homogenization scheme for 3D finite element analysis of composite bolted joints, Compos. Struct., vol. 120, pp. 1–9, 2015. DOI: 10.1016/j.compstruct.2014.09.061.
   Web of Science ®Google Scholar
• M. Qiu, Subcritical spheroidizing annealing of SCM435 cold heading steel (in Chinese) [Master's thesis], 2014.
   Google Scholar
• C.T. McCarthy, M.A. McCarthy, W.F. Stanley, and V.P. Lawlor, Experiences with modeling friction in composite bolted joints, J. Compos. Mater., vol. 39, no. 21, pp. 1881–1908, 2005. DOI: 10.1177/0021998305051805.
   Web of Science ®Google Scholar
• Henkel Inc. Hysol EA 9394 Technical Data Sheet, 2002. Available from https://tdsna.henkel.com/americas/na/adhesives/hnauttds.nsf/web/D61948C932B43DF38525715C001BD400/$File/Hysol_EA_9394-EN.pdf.
   Google Scholar