Strain pattern search of photo-responsive strip using topology optimization method

References

• P. M. Hogan, a. R. Tajbakhsh, and E. M. Terentjev, UV manipulation of order and macroscopic shape in nematic elastomers, Phys. Rev. E., vol. 65, pp. 041720, 2002. DOI: 10.1103/PhysRevE.65.041720.
   PubMed Web of Science ®Google Scholar
• Y. Lee, H. Lee, T. Hwang, et al., Sequential folding using light-activated polystyrene sheet, Sci. Rep., vol. 5, pp. 16544, 2015. DOI: 10.1038/srep16544.
   PubMed Web of Science ®Google Scholar
• K. Fuchi, T. H. Ware, P. R. Buskohl, et al., Topology optimization for the design of folding liquid crystal elastomer actuators, Soft Matter., vol. 11, no. 37, pp. 7288–7295, 2015. DOI: 10.1039/C5SM01671A.
   PubMed Web of Science ®Google Scholar
• C. Ohm, M. Brehmer, and R. Zentel, Liquid crystalline elastomers as actuators and sensors, Adv. Mater., vol. 22, no. 31, pp. 3366–3387, 2010. DOI: 10.1002/adma.200904059.
   PubMed Web of Science ®Google Scholar
• S. Serak, N. Tabiryan, R. Vergara, et al., Liquid crystalline polymer cantilever oscillators fueled by light, Soft Matter., vol. 6, no. 4, pp. 779–783, 2010. DOI: 10.1039/B916831A.
   Web of Science ®Google Scholar
• K. M. Lee, M. L. Smith, H. Koerner, et al., Photodriven, flexural-torsional oscillation of glassy azobenzene liquid crystal polymer networks, Adv. Funct. Mater., vol. 21, no. 15, pp. 2913–2918, 2011. DOI: 10.1002/adfm.201100333.
   Web of Science ®Google Scholar
• H. Finkelmann, E. Nishikawa, G. G. Pereira, and M. Warner, A new opto-mechanical effect in solids, Phys. Rev. Lett., vol. 87, no. 1, pp. 015501, 2001. DOI: 10.1103/PhysRevLett.87.015501.
   PubMed Web of Science ®Google Scholar
• C. D. Modes, K. Bhattacharya, and M. Warner, Gaussian curvature from flat elastica sheets, Proc. R Soc. A., vol. 467, no. 2128, pp. 1121–1140, 2011. DOI: 10.1098/rspa.2010.0352.
   Google Scholar
• J. Wei, and Y. Yu, Photodeformable polymer gels and crosslinked liquid-crystalline polymers, Soft Matter., vol. 8, no. 31, pp. 8050, 2012. DOI: 10.1039/c2sm25474c.
   Web of Science ®Google Scholar
• J. Mamiya, Photomechanical energy conversion based on cross-linked liquid-crystalline polymers, Polym. J., vol. 45, no. 3, pp. 239–246, 2013. DOI: 10.1038/pj.2012.140.
   Web of Science ®Google Scholar
• M. Howard, J. Pajot, K. Maute, and M. L. Dunn, A computational design methodology for assembly and actuation of thin-film structures via patterning of eigenstrains, J. Microelectromech. Syst., vol. 18, no. 5, pp. 1137–1148, 2009. DOI: 10.1109/JMEMS.2009.2025562.
   Web of Science ®Google Scholar
• J. M. Pajot, K. Maute, Y. Zhang, and M. L. Dunn, Design of patterned multilayer films with eigenstrains by topology optimization, Int. J. Solids Struct., vol. 43, no. 6, pp. 1832–1853, 2006. DOI: 10.1016/j.ijsolstr.2005.03.036.
   Web of Science ®Google Scholar
• A. S. Kuenstler, Y. Chen, P. Bui, et al., Blueprinting photothermal shape-morphing of liquid crystal elastomers, Adv. Mater., vol. 32, no. 17, pp. 2000609, 2020. DOI: 10.1002/adma.202000609.
   Web of Science ®Google Scholar
• M. J. Geiss, N. Boddeti, O. Weeger, et al., Combined level-set-XFEM-density topology optimization of four-dimensional printed structures undergoing large deformation, J. Mech. Des. Trans. ASME, vol. 141, pp. 1–14, 2019. DOI: 10.1115/1.4041945.
   Web of Science ®Google Scholar
• E. Salvati, and A. M. Korsunsky, A simplified FEM eigenstrain residual stress reconstruction for surface treatments in arbitrary 3D geometries, Int. J. Mech. Sci., vol. 138–139, pp. 457–466, 2018. DOI: 10.1016/j.ijmecsci.2018.02.016.
   Web of Science ®Google Scholar
• K. Maute, M. Nikbay, and C. Farhat, Coupled analytical sensitivity analysis and optimization of three-dimensional nonlinear aeroelastic systems, AIAA J., vol. 39, no. 11, pp. 2051–2061, 2001. DOI: 10.2514/3.14968.
   Google Scholar
• W. M. Rubio, E. C. N. Silva, E. V. Bordatchev, and M. J. F. Zeman, Topology optimized design, microfabrication and characterization of electro-thermally driven microgripper, J. Intell. Mater. Syst. Struct., vol. 20, no. 6, pp. 669–681, 2009. DOI: 10.1177/1045389X08093548.
   Web of Science ®Google Scholar
• C. Y. Kiyono, P. H. Nakasone, and E. C. N. Silva, 2010. Design of piezoelectric laminated shell structures with material gradation and fiber orientation using topology optimization, 13th AIAA/ISSMO Multidiscip Anal Optim Conf. DOI: 10.2514/6.2010-9098.
   Google Scholar
• H. Rodrigues, and P. Fernandes, A material based model for topology optimization of thermoelastic structures, Int. J. Numer. Meth. Engng., vol. 38, no. 12, pp. 1951–1965, 1995. DOI: 10.1002/nme.1620381202.
   Web of Science ®Google Scholar
• T. Ozaki, T. Nomura, N. Fujitsuka, et al., Topology optimization using multistep mapping from 2D photomask to 3D structure for designing reinforcing rib, Sensors Actuat. A. Phys., vol. 215, pp. 130–135, 2014. DOI: 10.1016/j.sna.2013.08.033.
   Web of Science ®Google Scholar
• I. F. Ituarte, N. Boddeti, V. Hassani, et al., Design and additive manufacture of functionally graded structures based on digital materials, Addit. Manuf., vol. 30, pp. 100839, 2019. DOI: 10.1016/j.addma.2019.100839.
   Web of Science ®Google Scholar
• M. P. Bendsùe, and O. Sigmund, Material interpolation schemes in topology optimization, Arch. Appl. Mech., vol. 69, pp. 634–654, 1999. DOI: 10.1007/s004190050248.
   Web of Science ®Google Scholar
• Y. Lin, L. Jin, and Y. Huo, Quasi-soft opto-mechanical behavior of photochromic liquid crystal elastomer: Linearized stress-strain relations and finite element simulations, Int. J. Solids Struct., vol. 49, no. 18, pp. 2668–2680, 2012. DOI: 10.1016/j.ijsolstr.2012.05.031.
   Web of Science ®Google Scholar
• H. Chung, J. Choi, J.-H. Yun, and M. Cho, Light and thermal responses of liquid-crystal-network films: A finite element study, Phys. Rev. E., vol. 91, pp. 042503, 2015. DOI: 10.1103/PhysRevE.91.042503.
   Web of Science ®Google Scholar
• C. A. Felippa, and B. Haugen, A unified formulation of small-strain corotational finite elements: I. Theory, Comput. Methods Appl. Mech. Eng., vol. 194, no. 21–24, pp. 2285–2335, 2005. DOI: 10.1016/j.cma.2004.07.035.
   Web of Science ®Google Scholar
• J. Yang, and P. Xia, Finite element corotational formulation for geometric nonlinear analysis of thin shells with large rotation and small strain, Sci. China Technol. Sci., vol. 55, no. 11, pp. 3142–3152, 2012. DOI: 10.1007/s11431-012-4995-2.
   Web of Science ®Google Scholar
• C. A. Felippa, A study of optimal membrane triangles with drilling freedoms, Comput. Methods Appl. Mech. Eng., vol. 192, no. 16–18, pp. 2125–2168, 2003. DOI: 10.1016/S0045-7825(03)00253-6.
   Web of Science ®Google Scholar
• J.-L. Batoz, K-Jür Bathe, and L.-W. Ho, A study of three-node triangular plate bending elements, Int. J. Numer. Meth. Engng., vol. 15, no. 12, pp. 1771–1812, 1980. DOI: 10.1002/nme.1620151205.
   Web of Science ®Google Scholar
• D. Corbett, and M. Warner, Changing liquid crystal elastomer ordering with light – a route to opto-mechanically responsive materials, Liq. Cryst., vol. 36, no. 10–11, pp. 1263–1280, 2009. DOI: 10.1080/02678290903062994.
   Web of Science ®Google Scholar
• D. Corbett, and M. Warner, Linear and nonlinear photoinduced deformations of cantilevers, Phys. Rev. Lett., vol. 99, no. 17, pp. 174302–174310, 2007. DOI: 10.1103/PhysRevLett.99.174302.
   PubMed Web of Science ®Google Scholar
• D. Corbett, and M. Warner, Bleaching and stimulated recovery of dyes and of photocantilevers, Phys. Rev. E., vol. 77, pp. 051710, 2008. DOI: 10.1103/PhysRevE.77.051710.
   Web of Science ®Google Scholar
• Y. Yu, and T. Ikeda, Alignment modulation of azobenzene-containing liquid crystal systems by photochemical reactions, J. Photochem. Photobiol. C. Photochem. Rev., vol. 5, no. 3, pp. 247–265, 2004. DOI: 10.1016/j.jphotochemrev.2004.10.004.
   Web of Science ®Google Scholar