Finite element analysis of smart composite plate structures coupled with piezoelectric materials: Investigation of static and vibration responses

References

• T. Bailey and J.E. Hubbard, Jr, Distributed piezoelectric-polymer active vibration control of a cantilever beam, J. Guid. Control Dyn., vol. 8, no. 5, pp. 605–611, 1985. DOI: 10.2514/3.20029.
   Web of Science ®Google Scholar
• E.F. Crawley and J. De Luis, Use of piezoelectric actuators as elements of intelligent structures, AIAA J., vol. 25, no. 10, pp. 1373–1385, 1987. DOI: 10.2514/3.9792.
   Google Scholar
• A. Baz and S. Poh, Performance of an active control system with piezoelectric actuators, J. Sound Vib., vol. 126, no. 2, pp. 327–343, 1988. DOI: 10.1016/0022-460X(88)90245-3.
   Web of Science ®Google Scholar
• H.S. Tzou and C.I. Tseng, Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems: a piezoelectric finite element approach, J. Sound Vib., vol. 138, no. 1, pp. 17–34, 1990. DOI: 10.1016/0022-460X(90)90701-Z.
   Web of Science ®Google Scholar
• P. Heyliger, Static behavior of laminated elastic/piezoelectric plates, AIAA J., vol. 32, no. 12, pp. 2481–2484, 1994. DOI: 10.2514/3.12321.
   Google Scholar
• M.C. Ray, R. Bhattacharya, and B. Samanta, Exact solutions for dynamic analysis of composite plates with distributed piezoelectric layers, Comput. Struct., vol. 66, no. 6, pp. 737–743, 1998. DOI: 10.1016/S0045-7949(97)00126-0.
   Web of Science ®Google Scholar
• N. Mallik, and M.C. Ray, Exact solutions for the analysis of piezoelectric fiber reinforced composites as distributed actuators for smart composite plates, Int. J. Mech. Mater. Des., vol. 1, no. 4, pp. 347–364, 2004. DOI: 10.1007/s10999-005-0516-9.
   Google Scholar
• M.C. Ray, and H.M. Sachade, Exact solutions for the functionally graded plates integrated with a layer of piezoelectric fiber-reinforced composite. J. Appl. Mech., vol. 73, no. 4, pp. 622–632, 2006.
   Web of Science ®Google Scholar
• S. Kapuria, and P. Kumari, Extended Kantorovich method for coupled piezoelasticity solution of piezolaminated plates showing edge effects. Proc. Royal Soc. A Math. Phys. Eng. Sci., vol. 469, no. 2151, pp. 20120565, 2013.
   Google Scholar
• P. Kumari, and A. Singh, Three-dimensional analytical solution for FGM plate with varying material properties in in-plane directions using extended kantorovich method. In Recent Advances in Structural Engineering, Springer, Singapore, vol. 1, pp. 611–621, 2019.
   Google Scholar
• S.S. Vel, and R.C. Batra, Three-dimensional analytical solution for hybrid multilayered piezoelectric plates, J. Appl. Mech., vol. 67, no. 3, pp. 558–567, 2000. DOI: 10.1115/1.1311274.
   Web of Science ®Google Scholar
• S. Sawarkar, S. Pendhari, and Y. Desai, Semi-analytical solutions for static analysis of piezoelectric laminates, Compos. Struct. ., vol. 153, pp. 242–252, 2016. DOI: 10.1016/j.compstruct.2016.05.106.
   Web of Science ®Google Scholar
• S. Sawarkar, S. Pendhari, Y. Desai, and T. Kant, Electro-elastic analysis of simply supported functionally graded, laminated and sandwich piezoelectric plates, Int. J. Comput. Methods Eng. Sci. Mech., vol. 21, no. 6, pp. 312–330, 2020. DOI: 10.1080/15502287.2020.1841333.
   Web of Science ®Google Scholar
• C. Willberg, and U. Gabbert, Development of a three-dimensional piezoelectric isogeometric finite element for smart structure applications, Acta Mech., vol. 223, no. 8, pp. 1837–1850, 2012. DOI: 10.1007/s00707-012-0644-x.
   Web of Science ®Google Scholar
• G. Akhras, and W.C. Li, Three-dimensional static, vibration and stability analysis of piezoelectric composite plates using a finite layer method, Smart Mater. Struct., vol. 16, no. 3, pp. 561–569, 2007. DOI: 10.1088/0964-1726/16/3/002.
   Google Scholar
• J. Kim, V.V. Varadan, and V.K. Varadan, Finite element modelling of structures including piezoelectric active devices, Int. J. Numer. Meth. Engng., vol. 40, no. 5, pp. 817–832, 1997. DOI: 10.1002/(SICI)1097-0207(19970315)40:5<817::AID-NME90>3.0.CO;2-B.
   Web of Science ®Google Scholar
• J.N. Reddy, An evaluation of equivalent-single-layer and layerwise theories of composite laminates, Compos. Struct., vol. 25, no. 1-4, pp. 21–35, 1993. DOI: 10.1016/0263-8223(93)90147-I.
   Web of Science ®Google Scholar
• S. Abrate, and M. Di Sciuva, Equivalent single layer theories for composite and sandwich structures: a review, Compos. Struct., vol. 179, pp. 482–494, 2017. DOI: 10.1016/j.compstruct.2017.07.090.
   Web of Science ®Google Scholar
• E. Carrera, Historical review of zig-zag theories for multilayered plates and shells, Appl. Mech. Rev., vol. 56, no. 3, pp. 287–308, 2003. DOI: 10.1115/1.1557614.
   Google Scholar
• A.S. Sayyad, and Y.M. Ghugal, Bending, buckling and free vibration of laminated composite and sandwich beams: a critical review of literature, Compos. Struct., vol. 171, pp. 486–504, 2017. DOI: 10.1016/j.compstruct.2017.03.053.
   Web of Science ®Google Scholar
• B.T. Wang, and C.A. Rogers, Laminate plate theory for spatially distributed induced strain actuators, J. Compos. Mater., vol. 25, no. 4, pp. 433–452, 1991. DOI: 10.1177/002199839102500405.
   Web of Science ®Google Scholar
• J.M.S. Moita, I.F. Correia, C.M.M. Soares, and C.A.M. Soares, Active control of adaptive laminated structures with bonded piezoelectric sensors and actuators, Comput.Struct., vol. 82, no. 17-19, pp. 1349–1358, 2004. DOI: 10.1016/j.compstruc.2004.03.030.
   Web of Science ®Google Scholar
• J.M.S. Moita, C.M.M. Soares, and C.A.M. Soares, Geometrically non-linear analysis of composite structures with integrated piezoelectric sensors and actuators, Compos. Struct., vol. 57, no. 1-4, pp. 253–261, 2002. DOI: 10.1016/S0263-8223(02)00092-2.
   Web of Science ®Google Scholar
• M.C. Ray, and N. Mallik, Finite element analysis of smart structures containing piezoelectric fiber-reinforced composite actuator, AIAA J., vol. 42, no. 7, pp. 1398–1405, 2004. DOI: 10.2514/1.4030.
   Google Scholar
• S.B. Kerur, and A. Ghosh, Active vibration control of composite plate using AFC actuator and PVDF sensor, Int. J. Str. Stab. Dyn., vol. 11, no. 02, pp. 237–255, 2011. DOI: 10.1142/S0219455411004075.
   Google Scholar
• K. Chandrashekhara, and A.N. Agarwal, Active vibration control of laminated composite plates using piezoelectric devices: a finite element approach, J. Intell. Mater. Syst. Struct., vol. 4, no. 4, pp. 496–508, 1993. DOI: 10.1177/1045389X9300400409.
   Google Scholar
• J.N. Reddy, A simple higher-order theory for laminated composite plates, J. Appl. Mech., vol. 51, no. 4, pp. 745–752, 1984. DOI: 10.1115/1.3167719.
   Web of Science ®Google Scholar
• T. Kant, and B.S. Manjunatha, An unsymmetric FRC laminate C° finite element model with 12 degrees of freedom per node, Eng. Comput., vol. 5, no. 4, pp. 300–308, 1988. DOI: 10.1108/eb023749.
   Google Scholar
• R.P. Shimpi, Refined plate theory and its variants, AIAA J., vol. 40, no. 1, pp. 137–146, 2002. DOI: 10.2514/2.1622.
   Google Scholar
• A. Tounsi, M.S.A. Houari, S. Benyoucef, and E.A. Adda Bedia, A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates, Aerosp. Sci. Technol., vol. 24, no. 1, pp. 209–220, 2013. DOI: 10.1016/j.ast.2011.11.009.
   Web of Science ®Google Scholar
• A. Mahi, E.A. Adda Bedia, and A. Tounsi, A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates, Appl. Math. Modell., vol. 39, no. 9, pp. 2489–2508, 2015. DOI: 10.1016/j.apm.2014.10.045.
   Web of Science ®Google Scholar
• B. Samanta, M.C. Ray, and R. Bhattacharyya, Finite element model for active control of intelligent structures, AIAA J., vol. 34, no. 9, pp. 1885–1893, 1996. DOI: 10.2514/3.13322.
   Google Scholar
• S.M. Shiyekar, and T. Kant, Higher order shear deformation effects on analysis of laminates with piezoelectric fibre reinforced composite actuators, Compos. Struct. ., vol. 93, no. 12, pp. 3252–3261, 2011. DOI: 10.1016/j.compstruct.2011.05.016.
   Web of Science ®Google Scholar
• J. Rouzegar, R. Koohpeima, and F. Abad, Dynamic analysis of laminated composite plate integrated with a piezoelectric actuator using four-variable refined plate theory, Iran. J. Sci. Technol. Trans. Mech. Eng., vol. 44, no. 3, pp. 557–514, 2020. DOI: 10.1007/s40997-019-00284-1.
   Web of Science ®Google Scholar
• M.R. Barati, H. Shahverdi, and A.M. Zenkour, Electro-mechanical vibration of smart piezoelectric FG plates with porosities according to a refined four-variable theory, Mech. Adv. Mater. Struct., vol. 24, no. 12, pp. 987–998, 2017. DOI: 10.1080/15376494.2016.1196799.
   Web of Science ®Google Scholar
• A.M. Zenkour, and Z.S. Hafed, Bending analysis of functionally graded piezoelectric plates via quasi-3D trigonometric theory, Mech. Adv. Mater. Struct., vol. 27, no. 18, pp. 1551–1562, 2020. DOI: 10.1080/15376494.2018.1516325.
   Web of Science ®Google Scholar
• A.M. Zenkour, and R.A. Alghanmi, Static response of sandwich plates with FG core and piezoelectric faces under thermo-electro-mechanical loads and resting on elastic foundations, Thin-Walled Struct., vol. 157, pp. 107025, 2020. DOI: 10.1016/j.tws.2020.107025.
   Web of Science ®Google Scholar
• A. Milazzo, and C. Orlando, An equivalent single-layer approach for free vibration analysis of smart laminated thick composite plates, Smart Mater. Struct., vol. 21, no. 7, pp. 075031, 2012. DOI: 10.1088/0964-1726/21/7/075031.
   Web of Science ®Google Scholar
• J.N. Reddy, On the generalization of displacement-based laminate theories, Appl. Mech. Rev., vol. 42, no. 11S, pp. S213–S222, 1989. DOI: 10.1115/1.3152393.
   Google Scholar
• A.J.M. Ferreira, Analysis of composite plates using a layerwise theory and multiquadrics discretization, Mech. Adv. Mater. Struct., vol. 12, no. 2, pp. 99–112, 2005. DOI: 10.1080/15376490490493952.
   Web of Science ®Google Scholar
• E. Carrera, Evaluation of layerwise mixed theories for laminated plates analysis, AIAA J., vol. 36, no. 5, pp. 830–839, 1998. DOI: 10.2514/2.444.
   Google Scholar
• M. Di Sciuva, Multilayered anisotropic plate models with continuous interlaminar stresses, Compos. Struct., vol. 22, no. 3, pp. 149–167, 1992. DOI: 10.1016/0263-8223(92)90003-U.
   Web of Science ®Google Scholar
• M. Cho, and R.R. Parmerter, Efficient higher order composite plate theory for general lamination configurations, AIAA J., vol. 31, no. 7, pp. 1299–1306, 1993. DOI: 10.2514/3.11767.
   Google Scholar
• H. Murakami, Laminated composite plate theory with improved in-plane responses, J. Appl. Mech., vol. 53, no. 3, pp. 661–666, 1986. DOI: 10.1115/1.3171828.
   Web of Science ®Google Scholar
• A. Chakrabarti, and A.H. Sheikh, Vibration of laminate-faced sandwich plate by a new refined element, J. Aerosp. Eng., vol. 17, no. 3, pp. 123–134, 2004. DOI: 10.1061/(ASCE)0893-1321(2004)17:3(123).
   Web of Science ®Google Scholar
• M.K. Pandit, A.H. Sheikh, and B.N. Singh, Analysis of laminated sandwich plates based on an improved higher order zigzag theory, J. Sandwich Struct. Mater.., vol. 12, no. 3, pp. 307–326, 2010a. DOI: 10.1177/1099636209104517.
   Web of Science ®Google Scholar
• E.J. Barbero, J.N. Reddy, and J.L. Teply, General two-dimensional theory of laminated cylindrical shells, AIAA J., vol. 28, no. 3, pp. 544–553, 1990. DOI: 10.2514/3.10426.
   Google Scholar
• A. Nosier, R.K. Kapania, and J.N. Reddy, Free vibration analysis of laminated plates using a layerwise theory, AIAA J., vol. 31, no. 12, pp. 2335–2346, 1993. DOI: 10.2514/3.11933.
   Google Scholar
• J.L. Mantari, and C.G. Soares, Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates, Compos. Struct., vol. 105, pp. 319–331, 2013. DOI: 10.1016/j.compstruct.2013.04.042.
   Web of Science ®Google Scholar
• M. Cetkovic, Thermo-mechanical bending of laminated composite and sandwich plates using layerwise displacement model, Compos. Struct. ., vol. 125, pp. 388–399, 2015. DOI: 10.1016/j.compstruct.2015.01.051.
   Web of Science ®Google Scholar
• J.S. Moita, A.L. Araújo, P. Martins, C.M. Soares, and C.M. Soares, A finite element model for the analysis of viscoelastic sandwich structures, Comput. Struct., vol. 89, no. 21-22, pp. 1874–1881, 2011. DOI: 10.1016/j.compstruc.2011.05.008.
   Web of Science ®Google Scholar
• J.S. Moita, A.L. Araújo, P.G. Martins, C.M.M. Soares, and C.A.M. Soares, Analysis of active-passive plate structures using a simple and efficient finite element model, Mech. Adv. Mater. Struct., vol. 18, no. 2, pp. 159–169, 2011. DOI: 10.1080/15376494.2010.496062.
   Web of Science ®Google Scholar
• M. Cho, and J. Oh, Higher order zig-zag theory for fully coupled thermo-electric–mechanical smart composite plates, Int. J. Solids Struct. ., vol. 41, no. 5-6, pp. 1331–1356, 2004. DOI: 10.1016/j.ijsolstr.2003.10.020.
   Web of Science ®Google Scholar
• S. Kapuria, and S.D. Kulkarni, Static electromechanical response of smart composite/sandwich plates using an efficient finite element with physical and electric nodes, Int. J. Mech. Sci., vol. 51, no. 1, pp. 1–20, 2009. DOI: 10.1016/j.ijmecsci.2008.11.005.
   Web of Science ®Google Scholar
• R.P. Khandelwal, A. Chakrabarti, and P. Bhargava, An efficient hybrid plate model for accurate analysis of smart composite laminates, J. Intell. Mater. Syst. Struct., vol. 24, no. 16, pp. 1927–1950, 2013. DOI: 10.1177/1045389X13486713.
   Web of Science ®Google Scholar
• B.B. Mishra, J.K. Nath, T. Biswal, and T. Das, Transverse shear stress relaxed zigzag theory for cylindrical bending of laminated composite and piezoelectric panels, Appl. Math. Modell., vol. 71, pp. 584–600, 2019. DOI: 10.1016/j.apm.2019.02.045.
   Web of Science ®Google Scholar
• T. Das, and J.K. Nath, Zigzag theory for piezoelectric-layer-integrated functionally graded material plates, AIAA J., vol. 59, no. 4, pp. 1406–1416, 2021. DOI: 10.2514/1.J059107.
   Google Scholar
• A.M. Zenkour, and H.D. El-Shahrany, Control of a laminated composite plate resting on Pasternak’s foundations using magnetostrictive layers, Arch. Appl. Mech., vol. 90, no. 9, pp. 1943–1959, 2020. DOI: 10.1007/s00419-020-01705-3.
   Web of Science ®Google Scholar
• M. Abualnour, M.S.A. Houari, A. Tounsi, E.A.A. Bedia, and S.R. Mahmoud, A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates, Compos. Struct., vol. 184, pp. 688–697, 2018. DOI: 10.1016/j.compstruct.2017.10.047.
   Web of Science ®Google Scholar
• M.M. Alipour, An analytical approach for bending and stress analysis of cross/angle-ply laminated composite plates under arbitrary non-uniform loads and elastic foundations, Arch. Civil Mech. Eng., vol. 16, no. 2, pp. 193–210, 2016. DOI: 10.1016/j.acme.2015.11.001.
   Web of Science ®Google Scholar
• A.A. Daikh, M.S.A. Houari, and M.A. Eltaher, A novel nonlocal strain gradient Quasi-3D bending analysis of sigmoid functionally graded sandwich nanoplates, Compos. Struct., vol. 262, pp. 113347, 2021. DOI: 10.1016/j.compstruct.2020.113347.
   Web of Science ®Google Scholar
• M.R. Barati, M.H. Sadr, and A.M. Zenkour, Buckling analysis of higher order graded smart piezoelectric plates with porosities resting on elastic foundation, Int. J. Mech. Sci., vol. 117, pp. 309–320, 2016. DOI: 10.1016/j.ijmecsci.2016.09.012.
   Web of Science ®Google Scholar
• M.O. Belarbi, A.M. Zenkour, A. Tati, S.J. Salami, A. Khechai, and M.S.A. Houari, An efficient eight‐node quadrilateral element for free vibration analysis of multilayer sandwich plates, Int. J. Numer. Methods Eng., vol. 122, no. 9, pp. 2360–2387, 2021. DOI: 10.1002/nme.6624.
   Web of Science ®Google Scholar
• V.K. Singh, T.R. Mahapatra, and S.K. Panda, Nonlinear transient analysis of smart laminated composite plate integrated with PVDF sensor and AFC actuator, Compos. Struct., vol. 157, pp. 121–130, 2016. DOI: 10.1016/j.compstruct.2016.08.020.
   Web of Science ®Google Scholar
• A. Garg, H.D. Chalak, and A. Chakrabarti, Bending analysis of functionally graded sandwich plates using HOZT including transverse displacement effects, Mech. Based Des. Struct. Mach., pp. 1–15, 2020.
   Web of Science ®Google Scholar
• R.P. Khandelwal, A. Chakrabarti, and P. Bhargava, Static and dynamic control of smart composite laminates, AIAA J., vol. 52, no. 9, pp. 1896–1914, 2014. DOI: 10.2514/1.J052666.
   Google Scholar
• S. Roy, S. Nath Thakur, and C. Ray, A modified higher order zigzag theory for response analysis of doubly curved cross-ply laminated composite shells, Mech. Adv. Mater. Struct., pp. 1–15, 2021.
   Google Scholar
• B. Devarajan, and R.K. Kapania, Thermal buckling of curvilinearly stiffened laminated composite plates with cutouts using isogeometric analysis, Compos. Struct., vol. 238, pp. 111881, 2020. DOI: 10.1016/j.compstruct.2020.111881.
   Web of Science ®Google Scholar
• T. Liu, Y. Jiang, S. Li, Q. Liu, and C. Wang, Isogeometric Analysis for Active Control of Piezoelectric Functionally Graded Plates in Thermal Environment, Shock Vib., vol. 2021, pp. 1–18, 2021. DOI: 10.1155/2021/5514476.
   Web of Science ®Google Scholar
• Ö. Civalek, and M. Avcar, Free vibration and buckling analyses of CNT reinforced laminated non-rectangular plates by discrete singular convolution method, Eng. Comput., pp. 1–33, 2020.
   Web of Science ®Google Scholar
• O. Ragb, M. Salah, M.S. Matbuly, and R.B.M. Amer, Vibration analysis of piezoelectric composite plate resting on nonlinear elastic foundations using Sinc and discrete singular convolution differential quadrature techniques, Math. Prob. Eng., vol. 2020, pp. 1–22, 2020. DOI: 10.1155/2020/7592302.
   Web of Science ®Google Scholar
• M. Momeni, and N. Fallah, Meshfree finite volume method for active vibration control of temperature-dependent piezoelectric laminated composite plates, Eng. Anal. Boundary Elem. , vol. 130, pp. 364–378, 2021. DOI: 10.1016/j.enganabound.2021.06.002.
   Web of Science ®Google Scholar
• R. Moradi-Dastjerdi, and K. Behdinan, Free vibration response of smart sandwich plates with porous CNT-reinforced and piezoelectric layers, Appl. Math. Modell., vol. 96, pp. 66–79, 2021. DOI: 10.1016/j.apm.2021.03.013.
   Web of Science ®Google Scholar
• E. Carrera, Theories and finite elements for multilayered plates and shells: a unified compact formulation with numerical assessment and benchmarking, ARCO, vol. 10, no. 3, pp. 215–296, 2003. DOI: 10.1007/BF02736224.
   Web of Science ®Google Scholar
• M. Filippi, E. Carrera, and A.M. Zenkour, Static analyses of FGM beams by various theories and finite elements, Composites Part B: Eng., vol. 72, pp. 1–9, 2015. DOI: 10.1016/j.compositesb.2014.12.004.
   Web of Science ®Google Scholar
• J.L. Mantari, I.A. Ramos, and A.M. Zenkour, A unified formulation for laminated composite and sandwich plates subject to thermal load using various plate theories, Int. J. Appl. Mechanics., vol. 08, no. 08, pp. 1650087, 2016. DOI: 10.1142/S1758825116500873.
   Google Scholar
• M. Cinefra, and E. Carrera, Shell finite elements for the analysis of multifield problems in multilayered composite structures, AMM, vol. 828, pp. 215–236, 2016. DOI: 10.4028/www.scientific.net/AMM.828.215.
   Google Scholar
• S. Brischetto, and E. Carrera, Coupled thermo-electro-mechanical analysis of smart plates embedding composite and piezoelectric layers, J. Therm. Stresses., vol. 35, no. 9, pp. 766–804, 2012. DOI: 10.1080/01495739.2012.689232.
   Web of Science ®Google Scholar
• R.B. Bharati, M. Filippi, P.K. Mahato, and E. Carrera, Flutter analysis of laminated composite structures using Carrera Unified Formulation, Compos. Struct., vol. 253, pp. 112759, 2020. DOI: 10.1016/j.compstruct.2020.112759.
   Web of Science ®Google Scholar
• S. Irfan, and F. Siddiqui, A review of recent advancements in finite element formulation for sandwich plates, Chin. J. Aeronaut., vol. 32, no. 4, pp. 785–798, 2019. DOI: 10.1016/j.cja.2018.11.011.
   Web of Science ®Google Scholar
• N.J. Pagano, Exact solutions for rectangular bidirectional composites and sandwich plates, J. Compos. Mater., vol. 4, no. 1, pp. 20–34, 1970. DOI: 10.1177/002199837000400102.
   Google Scholar
• K.M. Liew, Z.Z. Pan, and L.W. Zhang, An overview of layerwise theories for composite laminates and structures: Development, numerical implementation and application, Compos. Struct., vol. 216, pp. 240–259, 2019. DOI: 10.1016/j.compstruct.2019.02.074.
   Web of Science ®Google Scholar
• A. Chanda, and R. Sahoo, Analytical modeling of laminated composite plates integrated with piezoelectric layer using Trigonometric Zigzag theory, J. Compos. Mater., vol. 54, no. 29, pp. 4691–4708, 2020. DOI: 10.1177/0021998320930807.
   Web of Science ®Google Scholar
• A. Chanda, and R. Sahoo, Forced Vibration Responses of Smart Composite Plates using Trigonometric Zigzag Theory, Int. J. Str. Stab. Dyn., vol. 21, no. 05, pp. 2150067, 2021. DOI: 10.1142/S021945542150067X.
   Web of Science ®Google Scholar
• K. Bhaskar, and T.K. Varadan, Refinement of higher-order laminated plate theories, AIAA J., vol. 27, no. 12, pp. 1830–1831, 1989. DOI: 10.2514/3.10345.
   Google Scholar
• M. Di Sciuva, Bending, vibration and buckling of simply supported thick multilayered orthotropic plates: an evaluation of a new displacement model, J. Sound Vib., vol. 105, no. 3, pp. 425–442, 1986. DOI: 10.1016/0022-460X(86)90169-0.
   Web of Science ®Google Scholar
• R.D. Cook, D.S. Malkus, M.E. Plesha, and R.J. Witt, Finite Element Modeling for Stress Analysis, John Wiley & Sons Inc., New York, 2007.
   Google Scholar
• J.N. Reddy, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd ed., CRC Press, New York, 2004.
   Google Scholar
• J. Rouzegar, and F. Abad, Analysis of cross-ply laminates with piezoelectric fiber-reinforced composite actuators using four-variable refined plate theory, Journal of Theoretical and Applied Mechanics., vol. 53, no. 2, pp. 439–452, 2015.
   Web of Science ®Google Scholar
• N. Grover, B.N. Singh, and D.K. Maiti, Analytical and finite element modeling of laminated composite and sandwich plates: an assessment of a new shear deformation theory for free vibration response, Int. J. Mech. Sci., vol. 67, pp. 89–99, 2013. DOI: 10.1016/j.ijmecsci.2012.12.010.
   Web of Science ®Google Scholar
• T. Kant, D.R.J. Owen, and O.C. Zienkiewicz, A refined higher-order C plate bending element, Comput. Struct., vol. 15, no. 2, pp. 177–183, 1982. DOI: 10.1016/0045-7949(82)90065-7.
   Web of Science ®Google Scholar
• N.S. Putcha, and J.N. Reddy, A refined mixed shear flexible finite element for the nonlinear analysis of laminated plates, Comput. Struct., vol. 22, no. 4, pp. 529–538, 1986. DOI: 10.1016/0045-7949(86)90002-7.
   Web of Science ®Google Scholar
• S.S. Sahoo, S.K. Panda, and V.K. Singh, Experimental and numerical investigation of static and free vibration responses of woven glass/epoxy laminated composite plate, Proc. Inst. Mech. Eng. Part L: J. Mater. Design Appl., vol. 231, no. 5, pp. 463–478, 2017. DOI: 10.1177/1464420715600191.
   Google Scholar
• M.C. Ray, R. Bhattacharya, and B. Samanta, Exact solutions for static analysis of intelligent structures, AIAA J., vol. 31, no. 9, pp. 1684–1691, 1993. DOI: 10.2514/3.11831.
   Google Scholar
• J. Rouzegar, and A. Abbasi, A refined finite element method for bending analysis of laminated plates integrated with piezoelectric fiber-reinforced composite actuators, Acta Mech. Sin. ., vol. 34, no. 4, pp. 689–705, 2018. DOI: 10.1007/s10409-017-0745-9.
   Web of Science ®Google Scholar
• P. Topdar, A.H. Sheikh, and N. Dhang, Response and control of smart laminates using a refined hybrid plate model, AIAA J., vol. 44, no. 11, pp. 2636–2644, 2006. DOI: 10.2514/1.6467.
   Google Scholar
• P.K. Swain, D.K. Maiti, and B.N. Singh, Passive flutter suppression of damaged smart laminated composite plate using active fiber composite layer, Mech. Based Des. Struct. Mach., pp. 1–20, 2020.
   Web of Science ®Google Scholar
• J.M.S. Moita, C.M.M. Soares, and C.A.M. Soares, Active control of forced vibrations in adaptive structures using a higher order model, Compos. Struct., vol. 71, no. 3-4, pp. 349–355, 2005. DOI: 10.1016/j.compstruct.2005.09.009.
   Web of Science ®Google Scholar
• S.Y. Wang, S.T. Quek, and K.K. Ang, Vibration control of smart piezoelectric composite plates, Smart Mater. Struct., vol. 10, no. 4, pp. 637–644, 2001. DOI: 10.1088/0964-1726/10/4/306.
   Web of Science ®Google Scholar