Inverse analysis for damage detection in a rod using EMI method

References

• M. Mańka, M. Rosiek, A. Martowicz, T. Stepinski, and T. Uhl, PZT based tunable interdigital transducer for Lamb waves based NDT and SHM, Mech. Syst. Sig. Process., vol. 78, pp. 71–83, 2016. DOI: 10.1016/j.ymssp.2015.12.013.
   Web of Science ®Google Scholar
• P. Kudela, M. Radzienski, and W. Ostachowicz, Impact induced damage assessment by means of Lamb wave image processing, Mech. Syst. Sig. Process., vol. 102, pp. 23–36, 2018. DOI: 10.1016/j.ymssp.2017.09.020.
   Web of Science ®Google Scholar
• X. Q. Li, B. Gao, W. L. Woo, G. Y. Tian, X. S. Qiu, and L. Y. Gu, Quantitative surface crack evaluation based on eddy current pulsed thermography, IEEE Sensors J., vol. 17, no. 2, pp. 412–421, 2017. DOI: 10.1109/JSEN.2016.2625815.
   Web of Science ®Google Scholar
• M. Petrovic, et al., Intensity fiber-optic sensor for structural health monitoring calibrated by impact tester, IEEE Sensors J., vol. 16, no. 9, pp. 3047–3053, 2016. DOI: 10.1109/JSEN.2016.2524045.
   Web of Science ®Google Scholar
• M. R. Pearson, M. Eaton, C. Featherston, R. Pulling, and K. Holford, Improved acoustic emission source location during fatigue and impact events in metallic and composite structure, Struct. Health Monit., vol. 16, no. 4, pp. 382–399, 2017. DOI: 10.1177/1475921716672206.
   Web of Science ®Google Scholar
• B. A. Castro, F. G. Baptista, and F. Ciampa, New imaging algorithm for material damage localisation based on impedance measurements under noise influence, Measurement., vol. 163, pp. 107953, 2020. DOI: 10.1016/j.measurement.2020.107953.
   Web of Science ®Google Scholar
• B. A. Castro, F. G. Baptista, and F. Ciampa, Comparative analysis of signal processing techniques for impedance-based SHM applications in noisy environments, Mech. Syst. Sig. Process., vol. 126, pp. 326–340, 2019. DOI: 10.1016/j.ymssp.2019.02.034.
   Web of Science ®Google Scholar
• C. Liang, F. P. Sun, and C. A. Rogers, An impedance method for dynamic analysis of active material system, J. Vib. Acoust., vol. 116, no. 1, pp. 120–128, 1994. DOI: 10.1115/1.2930387.
   Web of Science ®Google Scholar
• F. P. Sun, Z. Chaudhry, C. Liang, and C. A. Rogers, Truss structure integrity identification using PZT sensor-actuator, J. Intel. Mat. Syst. Str., vol. 6, no. 1, pp. 134–139, 1995. DOI: 10.1177/1045389X9500600117.
   Web of Science ®Google Scholar
• C. K. Soh, K. K. H. Tseng, S. Bhalla, and A. Gupta, Performance of smart piezoceramic patches in health monitoring of a RC bridge, Smart Mater. Struct., vol. 9, no. 4, pp. 533–542, 2000. DOI: 10.1088/0964-1726/9/4/317.
   Google Scholar
• G. Park, H. H. Cudney, and D. J. Inman, Impedance-based health monitoring of civil structural components, J. Infrastruct. Syst., vol. 6, no. 4, pp. 153–160, 2000. DOI: 10.1061/(ASCE)1076-0342(2000)6:4(153).
   Google Scholar
• G. Park, H. H. Cudney, and D. J. Inman, Feasibility of using impedance-based damage assessment for pipeline structures, Earthquake Engng. Struct. Dyn., vol. 30, no. 10, pp. 1463–1474, 2001. DOI: 10.1002/eqe.72.
   Web of Science ®Google Scholar
• G. Park, D. E. Muntges, and D. J. Inman, Self-monitoring and self-healing jointed structures, KEM., vol. 204–205, pp. 75–84, 2001. DOI: 10.4028/www.scientific.net/KEM.204-205.75.
   Google Scholar
• D. S. Wang, W. Xiang, and H. P. Zhu, Damage identification in beam type structures based on statistical moment using a two step method, J. Sound Vib., vol. 333, no. 3, pp. 745–760, 2014. DOI: 10.1016/j.jsv.2013.10.007.
   Web of Science ®Google Scholar
• J. J. Zhu, Y. S. Wang, and X. L. Qing, Modified electromechanical impedance-based disbond monitoring for honeycomb sandwich composite structure, Compos. Struct., vol. 217, pp. 175–185, 2019. DOI: 10.1016/j.compstruct.2019.03.033.
   Web of Science ®Google Scholar
• R. Perera, A. Gil, L. Torres, and C. Barris, Diagnosis of NSM FRP reinforcement in concrete by using mixed-effects models and EMI approaches, Compos. Struct., vol. 273, pp. 114322, 2021. DOI: 10.1016/j.compstruct.2021.114322.
   Web of Science ®Google Scholar
• C. Y. Zuo, X. Feng, Y. Zhang, L. Lu, and J. Zhou, Crack detection in pipelines using multiple electromechanical impedance sensors, Smart Mater. Struct., vol. 26, no. 10, pp. 104004, 2017. DOI: 10.1088/1361-665X/aa7ef3.
   Web of Science ®Google Scholar
• L. S. Huo, D. D. Chen, Y. B. Liang, H. N. Li, X. Feng, and G. B. Song, Impedance based bolt pre-load monitoring using piezoceramic smart washer, Smart Mater. Struct., vol. 26, no. 5, pp. 057004, 2017. DOI: 10.1088/1361-665X/aa6a8e.
   Web of Science ®Google Scholar
• J. C. Yan, W. S. Zhou, X. Zhang, and Y. Z. Lin, Interface monitoring of steel-concrete-steel sandwich structures using piezoelectric transducers, Nucl. Eng. Technol., vol. 51, no. 4, pp. 1132–1141, 2019. DOI: 10.1016/j.net.2019.01.013.
   Web of Science ®Google Scholar
• H. P. Zhu, H. Luo, D. M. Ai, and C. Wang, Mechanical impedance-based technique for steel structural corrosion damage detection, Measurement., vol. 88, pp. 353–359, 2016. DOI: 10.1016/j.measurement.2016.01.041.
   Web of Science ®Google Scholar
• A. N. Zagrai, and V. Giurgiutiu, Electro-mechanical impedance method for crack detection in thin plates, J. Intel. Mat. Syst. Str., vol. 12, no. 10, pp. 709–718, 2001. DOI: 10.1177/104538901320560355.
   Web of Science ®Google Scholar
• W. Yan, W. Q. Chen, C. W. Lim, and J. B. Cai, Application of EMI technique for crack detection in continuous beams adhesively bonded with multiple piezoelectric patches. Mech. Adv. Mater. Struc., vol. 15, no. 1, pp. 1–11, 2008. DOI: 10.1080/15376490701410513.
   Web of Science ®Google Scholar
• Y. W. Yang, and A. Miao, Two-dimensional modeling of the effects of external vibration on the PZT impedance signature, Smart Mater. Struct., vol. 19, no. 6, pp. 065031, 2010. DOI: 10.1088/0964-1726/19/6/065031.
   Google Scholar
• T. B. Lv, W. Yan, and J. H. Li, Electro-mechanical impedance model of a laminated rectangular plate with imperfect interfaces, J. Intel. Mat. Syst. Str., vol. 30, no. 20, pp. 2982–2994, 2019. DOI: 10.1177/1045389X19873394.
   Web of Science ®Google Scholar
• U. Meher, and M. R. Sunny, Detection of multiple structural damages from drive point and cross electro-mechanical impedance signatures, Mech. Adv. Mater. Struc., pp. 1–21, 2021. DOI: 10.1080/15376494.2021.1937757.
   Web of Science ®Google Scholar
• J. Xu, J. H. Dong, H. N. Jinhui, C. W. Li, and S. C. Zhang, Ho, Looseness Monitoring of bolted spherical joint connection using electro-mechanical impedance technique and BP neural networks, Sensors., vol. 19, no. 8, pp. 2019, 1906.
   Google Scholar
• J. N. Ding, J. F. Kang, J. S. Zhu, and X. S. Chen, Damage detection of epoxied joint model in precast concrete segmental bridges using PZT Technology, J. Aerosp. Eng., vol. 33, no. 3, pp. 04020012, 2020. DOI: 10.1061/(ASCE)AS.1943-5525.0001123.
   Web of Science ®Google Scholar
• E. Sevillano, R. Sun, A. Gil, and R. Perera, Interfacial crack-induced debonding identification in FRP-strengthened RC beams from PZT signatures using hierarchical clustering analysis, Compos. Part B: Eng., vol. 87, pp. 322–335, 2016. DOI: 10.1016/j.compositesb.2015.09.006.
   Web of Science ®Google Scholar
• Y. B. Zheng, et al., Lamb waves and electro-mechanical impedance based damage detection using a mobile PZT transducer set, Ultrasonics., vol. 92, pp. 13–20, 2019. DOI: 10.1016/j.ultras.2018.06.008.
   PubMed Web of Science ®Google Scholar
• R. Perera, L. Torres, A. Ruiz, C. Barris, and M. Baena, An EMI-based clustering for structural health monitoring of NSM FRP strengthening systems, Sensors., vol. 19, no. 17, pp. 3775, 2019. DOI: 10.3390/s19173775.
   PubMed Web of Science ®Google Scholar
• W. Yan, W. Q. Chen, J. B. Cai, and C. W. Lim, Quantitative structural damage detection using high frequency piezoelectric signatures via the reverberation matrix method, Int. J. Numer. Meth. Engng., vol. 71, no. 5, pp. 505–528, 2007. DOI: 10.1002/nme.1951.
   Web of Science ®Google Scholar
• V. Giurgiutiu, and A. N. Zagrai, Embedded self-sensing piezoelectric active sensors for on-line structural identification, J. Vib. Acoust., vol. 124, no. 1, pp. 116–125, 2002. DOI: 10.1115/1.1421056.
   Web of Science ®Google Scholar