Mechanical properties of a novel two-phase hybrid plate-lattice metamaterial

References

• S. Shan, et al., Multistable architected materials for trapping elastic strain energy, Adv. Mater., vol. 27, no. 29, pp. 4296–4301, 2015. DOI: 10.1002/adma.201501708.
   PubMed Web of Science ®Google Scholar
• X. Yu, J. Zhou, H. Liang, Z. Jiang, and L. Wu, Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review, Prog. Mater. Sci., vol. 94, pp. 114–173, 2018. DOI: 10.1016/j.pmatsci.2017.12.003.
   Web of Science ®Google Scholar
• Z.-X. Lu, X. Li, Z.-Y. Yang, and F. Xie, Novel structure with negative Poisson’s ratio and enhanced Young’s modulus, Compos. Struct., vol. 138, pp. 243–252, 2016. DOI: 10.1016/j.compstruct.2015.11.036.
   Web of Science ®Google Scholar
• D. Chen and X. Zheng, Multi-material additive manufacturing of metamaterials with giant, tailorable negative Poisson’s ratios, Sci. Rep., vol. 8, no. 1, p. 9139, 2018. DOI: 10.1038/s41598-018-26980-7.
   PubMedGoogle Scholar
• M. Helou and S. Kara, Design, analysis and manufacturing of lattice structures: An overview, Int. J. Comput. Integr. Manuf., vol. 31, no. 3, pp. 243–261, 2018. DOI: 10.1080/0951192X.2017.1407456.
   Web of Science ®Google Scholar
• G. Savio, R. Meneghello, and G. Concheri, Geometric modeling of lattice structures for additive manufacturing, RPJ, vol. 24, no. 2, pp. 351–360, 2018. DOI: 10.1108/RPJ-07-2016-0122.
   Google Scholar
• D. S. J. A. Saedi, S. H. Masood, M. F. U. Rab, A. Alomarah, and P. Ponnusamy, Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM, Mater. Des., vol. 144, pp. 32–44, 2018. DOI: 10.1016/j.matdes.2018.01.059.
   Web of Science ®Google Scholar
• Z. Wang and J. Liu, Mechanical performance of honeycomb filled with circular CFRP tubes, Compos. B., vol. 135, pp. 232–241, 2018. DOI: 10.1016/j.compositesb.2017.09.048.
   Web of Science ®Google Scholar
• J. Lian, et al., Catastrophic vs gradual collapse of thin-walled nanocrystalline Ni hollow cylinders as building blocks of microlattice structures, Nano Lett., vol. 11, no. 10, pp. 4118–4125, 2011. DOI: 10.1021/nl202475p.
   PubMed Web of Science ®Google Scholar
• H. N. Wadley, Multifunctional periodic cellular metals, Philos. Trans. A Math. Phys. Eng. Sci., vol. 364, no. 1838, pp. 31–68, 2006. DOI: 10.1098/rsta.2005.1697.
   PubMed Web of Science ®Google Scholar
• Q. Wang, Z. Li, Y. Zhang, S. Cui, Z. Yang, and Z. Lu, Ultra-low density architectured metamaterial with superior mechanical properties and energy absorption capability, Compos. B: Eng., vol. 202, p. 108379, 2020. DOI: 10.1016/j.compositesb.2020.108379.
   Web of Science ®Google Scholar
• L. J. Gibson and M. F. Ashby, Cellular Solids, Cambridge University Press, Cambridge, 1997. DOI: 10.1017/CBO9781139878326.
   Google Scholar
• M. F. Ashby, The properties of foams and lattices, Philos. Trans. A, Math. Phys. Eng. Sci., vol. 364, pp. 15–30, 2006. DOI: 10.1098/rsta.2005.1678.
   PubMed Web of Science ®Google Scholar
• V. S. Deshpande, M. F. Ashby, and N. A. Fleck, Foam topology: Bending versus stretching dominated architectures, Acta Mater., vol. 49, no. 6, pp. 1035–1040, 2001. DOI: 10.1016/S1359-6454(00)00379-7.
   Web of Science ®Google Scholar
• J. J. Andrew, J. Ubaid, F. Hafeez, A. Schiffer, and S. Kumar, Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring, Int. J. Impact Eng., vol. 134, p. 103360, 2019. DOI: 10.1016/j.ijimpeng.2019.103360.
   Web of Science ®Google Scholar
• E. B. Duoss, et al., Three-dimensional printing of elastomeric, cellular architectures with negative stiffness, Adv. Funct. Mater., vol. 24, no. 31, pp. 4905–4913, 2014. DOI: 10.1002/adfm.201400451.
   Web of Science ®Google Scholar
• C. Ling, A. Cernicchi, M. D. Gilchrist, and P. Cardiff, Mechanical behaviour of additively-manufactured polymeric octet-truss lattice structures under quasi-static and dynamic compressive loading, Mater. Des., vol. 162, pp. 106–118, 2019. DOI: 10.1016/j.matdes.2018.11.035.
   Web of Science ®Google Scholar
• T. Tancogne-Dejean, A. B. Spierings, and D. Mohr, Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading, Acta Mater., vol. 116, pp. 14–28, 2016. DOI: 10.1016/j.actamat.2016.05.054.
   Web of Science ®Google Scholar
• D. Mohr, Mechanism-based multi-surface plasticity model for ideal truss lattice materials, Int. J. Solids Struct., vol. 42, no. 11–12, pp. 3235–3260, 2005. DOI: 10.1016/j.ijsolstr.2004.10.032.
   Web of Science ®Google Scholar
• R. Gümrük and R. A. W. Mines, Compressive behaviour of stainless steel micro-lattice structures, Int. J. Mech. Sci., vol. 68, pp. 125–139, 2013. DOI: 10.1016/j.ijmecsci.2013.01.006.
   Web of Science ®Google Scholar
• G. Gurtner and M. Durand, Stiffest elastic networks, Proc. R. Soc. A: Math. Phys. Eng. Sci., vol. 470, 2014. DOI: 10.1098/rspa.2013.0611.
   Google Scholar
• T.-D. Thomas, D. Marianna, G. M. B. B. Colin, and M. Dirk, 3D plate-lattices: An emerging class of low-density metamaterial exhibiting optimal isotropic stiffness. Adv. Mater., vol. 30, no. 45, p. e1803334, 2018. DOI: 10.1002/adma.201803334.
   Google Scholar
• Z. Hashin and S. Shtrikman, A variational approach to the theory of the elastic behaviour of multiphase materials, J. Mech. Phys. Solids, vol. 11, pp. 127–140, 1963. DOI: 10.1016/0022-5096(63)90060-7.
   Web of Science ®Google Scholar
• J. B. Berger, H. N. G. Wadley, and R. M. McMeeking, Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness, Nature, vol. 543, no. 7646, pp. 533–537, 2017. DOI: 10.1038/nature21075.
   PubMed Web of Science ®Google Scholar
• J. J. Andrew, J. Schneider, J. Ubaid, R. Velmurugan, N. K. Gupta, and S. Kumar, Energy absorption characteristics of additively manufactured plate-lattices under low-velocity impact loading, Int. J. Impact Eng., vol. 149, p. 103768, 2021. DOI: 10.1016/j.ijimpeng.2020.103768.
   Web of Science ®Google Scholar
• P. Zhang, et al., Mechanical design and energy absorption of 3D novel hybrid lattice metamaterials, Sci. China Technol. Sci., vol. 64, no. 10, pp. 2220–2228, 2021. DOI: 10.1007/s11431-020-1756-x.
   Web of Science ®Google Scholar
• K. D. Traxel, C. Groden, J. Valladares, and A. Bandyopadhyay, Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V, Mater. Sci. Eng. A., vol. 809, p. 140925, 2021. DOI: 10.1016/j.msea.2021.140925.
   PubMed Web of Science ®Google Scholar
• Y. Xue, W. Wang, and F. Han, Enhanced compressive mechanical properties of aluminum based auxetic lattice structures filled with polymers, Compos. B: Eng., vol. 171, pp. 183–191, 2019. DOI: 10.1016/j.compositesb.2019.05.002.
   Web of Science ®Google Scholar
• H. S. Chul, L. J. Woo, and K. Kiju, A new type of low density material: Shellular. Adv. Mater., 27, 2015.
   Google Scholar
• X. Cao, et al., Dynamic compressive behavior of a modified additively manufactured rhombic dodecahedron 316L stainless steel lattice structure, Thin-Walled Struct., vol. 148, p. 106586, 2020. DOI: 10.1016/j.tws.2019.106586.
   Web of Science ®Google Scholar