245
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Symmetrization of contact stresses in coating under frictional sliding indentation

ORCID Icon, , , &
Pages 470-482 | Received 22 Jun 2022, Accepted 13 Aug 2022, Published online: 03 Sep 2022

References

  • Y. Ren, et al., A review on tribology of polymer composite coatings, Friction., vol. 9, no. 3, pp. 429–470, 2021. DOI: 10.1007/s40544-020-0446-4.
  • A. Mura, et al., Effect of different types of graphene coatings on friction and wear performance of aluminum alloy, Mech. Adv. Mater. Struct., vol. 29, no. 4, pp. 539–547, 2022. DOI: 10.1080/15376494.2020.1779419.
  • P. Meijers, The contact problem of a rigid cylinder on an elastic layer, Appl. Sci. Res., vol. 18, no. 1, pp. 353–383, 1968. DOI: 10.1007/BF00382359.
  • Y. Alinia, A. Beheshti, M. A. Guler, S. El-Borgi, and A. A. Polycarpou, Sliding contact analysis of functionally graded coating/substrate system, Mech. Mater., vol. 94, pp. 142–155, 2016. DOI: 10.1016/j.mechmat.2015.11.017.
  • M. N. Balci, and S. Dag, Solution of the dynamic frictional contact problem between a functionally graded coating and a moving cylindrical punch, Int. J. Solids Struct., vol. 161, pp. 267–281, 2019. DOI: 10.1016/j.ijsolstr.2018.11.020.
  • İ. Çömez, Thermoelastic contact problem of a magneto-electro-elastic layer indented by a rigid insulating punch, Mech. Adv. Mater. Struc., pp. 1–15, 2021. DOI: 10.1080/15376494.2021.1995087.
  • İ. Çömez, Frictional moving contact problem for a layer indented by a rigid cylindrical punch, Arch Appl Mech., vol. 87, no. 12, pp. 1993–2002, 2017. DOI: 10.1007/s00419-017-1306-1.
  • P. Fu, J. Zhao, X. Zhang, G. Kang, P. Wang, and Q. Kan, Thermo-mechanically coupled sliding contact shakedown analysis of functionally graded coating-substrate structures, Int. J. Mech. Sci., vol. 222, pp. 107241, 2022. DOI: 10.1016/j.ijmecsci.2022.107241.
  • M. J. Matthewson, The effect of a thin compliant protective coating on Hertzian contact stresses, J. Phys. D: Appl. Phys., vol. 15, no. 2, pp. 237–249, 1982. DOI: 10.1088/0022-3727/15/2/009.
  • P. Usov, and V. Danilov, Contact problem for elastic layer and rigid cylinder with friction forces, J. Frict. Wear., vol. 28, no. 3, pp. 225–238, 2007. DOI: 10.3103/S1068366607030014.
  • Y. Alinia, M. Hosseini-Nasab, and M. A. Güler, The sliding contact problem for an orthotropic coating bonded to an isotropic substrate, Eur. J. Mech. A-Solid., vol. 70, pp. 156–171, 2018. DOI: 10.1016/j.euromechsol.2018.02.010.
  • İ. Çömez, Frictional moving contact problem of an orthotropic layer indented by a rigid cylindrical punch, Mech. Mater., vol. 133, pp. 120–127, 2019. DOI: 10.1016/j.mechmat.2019.02.012.
  • P. Chen, and S. Chen, Partial slip contact between a rigid punch with an arbitrary tip-shape and an elastic graded solid with a finite thickness, Mech. Mater., vol. 59, pp. 24–35, 2013. DOI: 10.1016/j.mechmat.2012.12.003.
  • P. Chen, S. Chen, and J. Peng, Frictional contact of a rigid punch on an arbitrarily oriented gradient half-plane, Acta Mech., vol. 226, no. 12, pp. 4207–4221, 2015. DOI: 10.1007/s00707-015-1457-5.
  • L. F. Ma, and A. M. Korsunsky, Fundamental formulation for frictional contact problems of coated systems, Int. J. Solids Struct., vol. 41, no. 11-12, pp. 2837–2854, 2004. DOI: 10.1016/j.ijsolstr.2003.12.022.
  • J. Peng, Z. Wang, P. Chen, F. Gao, Z. Chen, and Y. Yang, Surface contact behavior of an arbitrarily oriented graded substrate with a spatially varying friction coefficient, Int. J. Mech. Sci., vol. 151, pp. 410–423, 2019. DOI: 10.1016/j.ijmecsci.2018.11.032.
  • C. Peijian, C. Shaohua, and P. Juan, Sliding contact between a cylindrical punch and a graded half-plane with an arbitrary gradient direction, Trans. ASME, J. Appl. Mech., vol. 82, no. 4, pp. 041008-1–041008-9, 2015. DOI: 10.1115/1.4029781.
  • M. J. Jaffar, Elastic strips in sliding contact, J Strain Anal Eng Design., vol. 26, no. 3, pp. 193–199, 1991. DOI: 10.1243/03093247V263193.
  • D. Nowell, and D. A. Hills, Contact problems incorporating elastic layers, Int J Solid Struct., vol. 24, no. 1, pp. 105–115, 1988. DOI: 10.1016/0020-7683(88)90102-3.
  • İ. Çömez, Frictional contact problem for a rigid cylindrical stamp and an elastic layer resting on a half plane, Int J Solid Struct., vol. 47, no. 7–8, pp. 1090–1097, 2010. DOI: 10.1016/j.ijsolstr.2010.01.003.
  • I. I. Argatov, and Y. S. Chai, Wear contact problem with friction: steady-state regime and wearing-in period, Int. J. Solids Struct., vol. 193-194, pp. 213–221, 2020. DOI: 10.1016/j.ijsolstr.2020.02.019.
  • N. Menga, G. Carbone, and D. Dini, Exploring the effect of geometric coupling on friction and energy dissipation in rough contacts of elastic and viscoelastic coatings, J. Mech. Phys. Solids., vol. 148, pp. 104273, 2021. DOI: 10.1016/j.jmps.2020.104273.
  • N. Menga, Rough frictional contact of elastic thin layers: The effect of geometrical coupling, Int. J. Solids Struct., vol. 164, pp. 212–220, 2019. DOI: 10.1016/j.ijsolstr.2019.01.005.
  • R. H. Bentall, and K. L. Johnson, An elastic strip in plane rolling contact, Int. J. Mech. Sci., vol. 10, no. 8, pp. 637–663, 1968. DOI: 10.1016/0020-7403(68)90070-2.
  • J. B. Alblas, and M. Kuipers, The two dimensional contact problem of a rough stamp sliding slowly on an elastic layer—I. General considerations and thick layer asymptotics, Int J Solid Struct., vol. 7, no. 1, pp. 99–109, 1971. DOI: 10.1016/0020-7683(71)90020-5.
  • J. B. Alblas, and M. Kuipers, The two dimensional contact problem of a rough stamp sliding slowly on an elastic layer—II. Thin layer asymptotics, Int. J. Solids Struct., vol. 7, no. 2, pp. 225–237, 1971. DOI: 10.1016/0020-7683(71)90045-X.
  • D. Nowell, and D. A. Hills, Tractive rolling of tyred cylinders, Int. J. Mech. Sci., vol. 30, no. 12, pp. 945–957, 1988. DOI: 10.1016/0020-7403(88)90076-8.
  • M. I. Chebakov, Asymptotic solution of contact problems for a relatively thick elastic layer when there are friction forces in the contact area, J Appl Math Mech., vol. 69, no. 2, pp. 296–304, 2005. DOI: 10.1016/j.jappmathmech.2005.03.016.
  • K. Zhu, Z. Jiang, D. Lyu, P. Li, and X. Jin, On the transition of the contact eccentricity of an elastic layer resting on a rigid frictionless substrate, Mech. Res. Commun., vol. 124, pp. 103927, 2022. DOI: 10.1016/j.mechrescom.2022.103927.
  • L. M. Keer, and T. N. Farris, Effects of finite thickness and tangential loading on development of zones of microslip in fretting, Tribol. T., vol. 30, no. 2, pp. 203–210, 1987. DOI: 10.1080/05698198708981749.
  • F. Erdogan, and M. A. Guler, Contact mechanics of FGM coatings. Bethlehem, PA: Leigh University, 2000.
  • F. Erdogan, G. D. Gupta, and T. S. Cook, Numerical solution of singular integral equations., in: Methods of Analysis and Solutions of Crack Problems, Dordrecht, Springer, pp. 368–425, 1973. DOI: 10.1090/qam/408277.
  • S. Krenk, On quadrature formulas for singular integral equations of the first and second kind, Quart. Appl. Math., vol. 33, no. 3, pp. 225–232, 1975. DOI: 10.1090/qam/448967.
  • F. Erdogan, Mixed Boundary-Value Problems in Mechanics, New York: Pergamon Press, Ltd, 1978. DOI: 10.1501/Vetfak_0000001132.
  • İ. Turhan, H. Oğuz, and E. Yusufoğlu, Chebyshev polynomial solution of the system of Cauchy-type singular integral equations of the first kind, Int. J. Comput. Math., vol. 90, no. 5, pp. 944–954, 2013. DOI: 10.1080/00207160.2012.738811.
  • J. C. Mason, and D. C. Handscomb, Chebyshev Polynomials, New York: CRC Press, 2003. DOI: 10.1201/9781420036114.
  • İ. Çömez, Contact problem for a functionally graded layer indented by a moving punch, Int. J. Mech. Sci., vol. 100, pp. 339–344, 2015. DOI: 10.1016/j.ijmecsci.2015.07.006.
  • M. A. Guler, and F. Erdogan, The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings, Int J Mech Sci., vol. 49, no. 2, pp. 161–182, 2007. DOI: 10.1016/j.ijmecsci.2006.08.006.
  • S. Dag, and F. Erdogan, A surface crack in a graded medium loaded by a sliding rigid stamp, Eng. Fract. Mech., vol. 69, no. 14-16, pp. 1729–1751, 2002. DOI: 10.1016/S0013-7944(02)00053-X.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.