Stacking sequence optimization of composite tubes submitted to crushing using the discrete ply model (DPM)

References

• P. H. Thornton, Energy absorption in composite structures, J. Compos. Mater., vol. 13, no. 3, pp. 247–262, 1979. DOI: 10.1177/002199837901300308.
   Web of Science ®Google Scholar
• G. L. Farley, and R. K. Jones, 1989. Energy-Absorption Capability of Composite Tubes and Beams, NASA Technical Memorandum, NASA-TM-101634-AVSCOM Technical Report 89B.003, AVSCOM TR-89-B-003, NASA Langley Research Center, Hampton, VA.
   Google Scholar
• D. Hull, A unified approach to progressive crushing of fiber-reinforced composite tubes, Compos. Sci Technol., vol. 40, no. 4, pp. 377–421, 1991. DOI: 10.1016/0266-3538(91)90031-J.
   Web of Science ®Google Scholar
• H. Hamada, S. Ramakrishna, and H. Satoh, Crushing mechanism of carbon fiber/PEEK composite tubes, Composites., vol. 26, no. 11, pp. 749–755, 1995. DOI: 10.1016/0010-4361(95)98195-Q.
   Web of Science ®Google Scholar
• H. A. B. Israr Ahmad, S. Rivallant, C. Bouvet, and J.-J. Barrau, Experimental investigation on mean crushing stress characterization of carbon-epoxy plies under compressive crushing mode, Compos. Struct., vol. 96, pp. 357–364, 2013. DOI: 10.1016/j.compstruct.2012.09.022.
   Web of Science ®Google Scholar
• L. Daniel, P. J. Hogg, and P. T. Curtis, The crush behaviour of carbon fibre angle-ply reinforcement and the effect of interlaminar shear strength on energy absorption capability, Compos Part B: Eng., vol. 31, no. 5, pp. 435–440, 2000. DOI: 10.1016/S1359-8368(00)00026-3.
   Web of Science ®Google Scholar
• A. Brighton, et al., Strain rate effects on the energy absorption of rapidly manufactured composite tubes, J. Compos. Mater., vol. 43, no. 20, pp. 2183–2200, 2009. DOI: 10.1177/0021998309344646.
   Web of Science ®Google Scholar
• D. Paul, V. Ramachandran, and N. K. Gupta, Improvements in the crushing behaviour of glass fibre-epoxy composite tubes by the addition of hollow glass particles, Thin-Walled Struct., vol. 141, pp. 111–118, 2019. DOI: 10.1016/j.tws.2019.03.033.
   Web of Science ®Google Scholar
• Haitao Ye, Xiang Zhou, Jiayao Ma, Hai Wang, and Zhong You, Axial crushing behaviors of composite pre-folded tubes made of KFRP/CFRP hybrid laminates, Thin-Walled Struct., vol. 149, pp. 106649, 2020. DOI: 10.1016/j.tws.2020.106649.
   Web of Science ®Google Scholar
• Paolo Feraboli, Bonnie Wade, Francesco Deleo, Mostafa Rassaian, Mark Higgins, and Alan Byar, LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen, Compos Part A: Appl Sci Manuf., vol. 42, pp. 1809–1825, 2011. DOI: 10.1016/j.compositesa.2011.08.004.
   Web of Science ®Google Scholar
• Ping Zhang, Liang_Jin Gui, Zi-Jie Fan, Qiang Yu, and Zhao-Kai Li, Finite element modeling of the quasi-static axial crushing of braided composite tubes, Comput Mater Sci., vol. 73, pp. 146–153, 2013. DOI: 10.1016/j.commatsci.2013.01.026.
   Web of Science ®Google Scholar
• Lucas L Vignoli, Marcelo A Savi, Pedro MCL Pacheco, and Alexander L Kalamkarov, Comparative analysis of micromechanical models for the elastic composite laminae, Compos Part B: Eng., vol. 174, pp. 106961, 2019. DOI: 10.1016/j.compositesb.2019.106961.
   Web of Science ®Google Scholar
• O. Allix, P. Feissel, and P. Thévenet, A delay damage mesomodel of laminates under dynamic loading: basic aspects and identification issues, Comput. Struct., vol. 81, no. 12, pp. 1177–1191, 2003. DOI: 10.1016/S0045-7949(03)00035-X.
   Web of Science ®Google Scholar
• C. Bouvet, B. Castanie, M. Bizeul, and J. J. Barrau, Low velocity impact modeling in laminate composite panels with discrete interface elements, Int. J. Solids Struct., vol. 46, no. 14–15, pp. 2809–2821, 2009. DOI: 10.1016/j.ijsolstr.2009.03.010.
   Web of Science ®Google Scholar
• N. Hongkarnjanakul, C. Bouvet, and S. Rivallant, Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fiber failures, Compos. Struct., vol. 106, pp. 549–559, 2013. DOI: 10.1016/j.compstruct.2013.07.008.
   Web of Science ®Google Scholar
• L. Adam, C. Bouvet, B. Castanié, A. Daidié, and E. Bonhomme, Discrete ply model of circular pull-through test of fasteners in laminates, Compos. Struct., vol. 94, no. 10, pp. 3082–3091, 2012. DOI: 10.1016/j.compstruct.2012.05.008.
   Web of Science ®Google Scholar
• S. Rivallant, C. Bouvet, and N. Hongkarnjanakul, Failure analysis of CFRP laminates subjected to compression after impact: FE simulation using discrete interface elements, Compos. Part A: Appl. Sci. Manuf., vol. 55, pp. 83–93, 2013. DOI: 10.1016/j.compositesa.2013.08.003.
   Web of Science ®Google Scholar
• V. Achard, C. Bouvet, B. Castanie, and C. Chirol, Discrete ply modelling of open hole tensile tests, Compos. Struct., vol. 113, pp. 369–381, 2014. DOI: 10.1016/j.compstruct.2014.03.031.
   Web of Science ®Google Scholar
• H. A. Israr, S. Rivallant, C. Bouvet, and J. J. Barrau, Finite element simulation of 0°/90° CFRP laminated plates subjected to crushing using a free-face-crushing concept, Compos. Part A: Appl Sci Manuf: Appl Sci Manuf., vol. 62, pp. 16–25, 2014. DOI: 10.1016/j.compositesa.2014.03.014.
   Web of Science ®Google Scholar
• J. Chambe, C. Bouvet, O. Dorival, and J. Ferrero, Energy absorption capacity of composite thin-wall circular tubes under axial crushing with different trigger initiations, J. Compos. Mater., vol. 54, no. 10, pp. 1281–1304, 2020. DOI: 10.1177/0021998319877221.
   Web of Science ®Google Scholar