A new multi-scale modeling method for needled C/C composites

References

• X. Chen, L. Chen, C. Zhang, L. Song, and D. Zhang, Three-dimensionalnneedle-punching for composites: review, Compos. Part A: Appl. Sci. Manuf., vol. 85, pp. 12–30, 2016.
   Web of Science ®Google Scholar
• D.D.R. Cartie, M. Troulis, and I.K. Partridge, Delamination of Z-pinned carbon fibre reinforced laminates, Compos. Sci. Technol., vol. 66, no. 6, pp. 855–861, 2006.
   Web of Science ®Google Scholar
• S. Zeng, M. Hoisington, and J.C. Seferis, Particulate interlayer toughening of dicyanate matrix composites, Polym. Compos., vol. 14, no. 6, pp. 458–466, 2004.
   Google Scholar
• L. Diansen, Y. Qianqian, J. Nang, and L. Jiang, Bending properties and failure mechanism of three-dimensional needle-punched carbon/carbon composites at room temperature and high temperature, New Carbon Mater., vol. 31, no. 4, pp. 437–444, 2016.
   Google Scholar
• J. Nie, Y. Xu, and L. Zhang, Microstructure and tensile behavior of multiply needled C/SiC composite fabricated by chemical vapor infiltration, J. Mater. Process. Technol., vol. 209, no. 1, pp. 572–576, 2009.
   Web of Science ®Google Scholar
• J. Zhang, R. Luo, Q. Xiang, and C. Yang, Compressive fracture behavior of 3D needle-punched carbon/carbon composites, Mater. Sci. Eng.:A, vol. 528, pp. 5002–5006, 2011.
   Web of Science ®Google Scholar
• H. Xu, L. Zhang, and L. Cheng, The yarn size dependence of tensile and in-plane shear properties of three-dimensional needled textile reinforced ceramic matrix composites, Mater. Des., vol. 67, pp. 428–435, 2015.
   Web of Science ®Google Scholar
• C.A. Diniz, S.S. Cunha, G.F. Gomes, and A.C. Ancelotti, Optimization of the layers of composite materials from neural networks with Tsai–Wu failure criterion, J. Fail. Anal. Prev., vol. 19, no. 3, pp. 709–715, 2019.
   Web of Science ®Google Scholar
• C.A. Diniz, Y. Mendez, F.A. de Almeida, S.S. da Cunha, Jr, and G.F. Gomes, Optimum design of composite structures with ply drop-offs using response surface methodology, Eng. Comput., vol. 38, no., 7, pp. 3036–3060, 2021.
   Google Scholar
• H. Kabir, and M.M. Aghdam, A robust Bézier based solution for nonlinear vibration and post-buckling of random checkerboard graphene nano-platelets reinforced composite beams, Compos. Struct., vol. 212, pp. 184–198, 2019.
   Web of Science ®Google Scholar
• H. Kabir, and M.M. Aghdam, A generalized 2D Bézier-based solution for stress analysis of notched epoxy resin plates reinforced with graphene nanoplatelets, Thin-Walled Struct., vol. 169, pp. 108484, 2021.
   Web of Science ®Google Scholar
• Y.Jia, D.Liao, H.Cui, A.Ji, X.Bai, and M.Yasir, Modelling the needling effect on the stress concentrations of laminated C/C composites, Mater. Des., vol. 104, pp. 19–26, 2016.
   Web of Science ®Google Scholar
• E. Sanchez-Palencia, and A. Zaoui, Homogenization Techniques for Composite Media, Springer-Verlag, Berlin, 1987.
   Google Scholar
• Z. Xia, Y. Zhang, and F. Ellyin, A unified periodical boundary conditions for representative volume elements of composites and applications, Int. J. Solids Struct., vol. 40, no. 8, pp. 1907–1921, 2003.
   Web of Science ®Google Scholar
• Z.H. Xia, C.W. Zhou, Q.L. Yong, and X. Wang, On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites, Int. J. Solids Struct., vol. 43, no. 2, pp. 266–278, 2006.
   Web of Science ®Google Scholar
• Y.J. Xu, and W.H. Zhang, A strain energy model for the prediction of the effective coefficient of thermal expansion of composite materials, Comput. Mater. Sci., vol. 53, pp. 241–250, 2012.
   Web of Science ®Google Scholar
• Y.J. Xu, W.H. Zhang, and M. Domaszewski, Microstructure modelling and prediction of effective elastic properties of 3D multiphase and multilayer braided composite, Mater. Sci. Technol., vol. 27, pp. 1213–1221, 2011.
   Web of Science ®Google Scholar
• X. Yingjie, Z. Pan, L. Huan, and Z. Weihong, Hierarchically modeling the elastic properties of 2D needled carbon/carbon composites, Compos. Struct., vol. 133, pp. 148–156, 2015.
   Web of Science ®Google Scholar
• C. Liu, J. Xie, Y. Sun, and L. Chen, Micro-scale modeling of textile composites based on the virtual fiber embedded models, Compos. Struct., vol. 230, pp. 111552, 2019.
   Web of Science ®Google Scholar
• C.C. Chamis, Mechanics of composite materials: past, present and future, J. Compos. Technol. Res., vol. 11, pp. 3–14, 1989.
   Web of Science ®Google Scholar
• X.Q. Feng, and S.W. Yu, Effects of the reinforcement shape on the effective moduli of composites(II), numerical comparison, J. Tsinghua Univ., vol. 41, no. 11, pp. 11–14, 2001.
   Google Scholar
• T. Mori, and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metall., vol. 21, no. 5, pp. 571–574, 1973.
   Google Scholar
• Y. Benveniste, A new approach to the application of Mori-Tanaka’s theory in composite materials, Mech. Mater., vol. 6, no. 2, pp. 147–157, 1987.
   Web of Science ®Google Scholar
• J. Xie, J. Liang, F. Guodong, and C. Zhen, Effect of needling parameters on the effective properties of 3D needled C/C-SiC composites, Compos. Sci. Technol., vol. 117, pp. 69–77, 2015.
   Web of Science ®Google Scholar
• J. Yu, C. Zhou, and H. Zhang, A micro-image based reconstructed finite element model of needle-punched C/C composite, Compos. Sci. Technol., vol. 153, pp. 48–61, 2017.
   Web of Science ®Google Scholar
• Y. Qi, G. Fang, Z. Wang, J. Liang, and S. Meng, An improved analytical method for calculating stiffness of 3D needled composites with different needle-punched processes, Compos. Struct., vol. 237, pp. 111938, 2020.
   Web of Science ®Google Scholar
• T. Yao, X. Chen, J. Li, Y. Wei, Z. Ren, H. Zheng, and Y. He, Experimental and numerical study of interlaminar shear property and failure mechanism of none-felt needled composites, Compos. Struct., vol. 290, pp. 115507, 2022.
   Web of Science ®Google Scholar
• S. Meng, L. Song, C. Xu, W. Wang, W. Xie, and H. Jin, Predicting the effective properties of 3D needled carbon/carbon composites by a hierarchical scheme with a fiber-based representative unit cell, Compos. Struct., vol. 172, pp. 198–209, 2017.
   Web of Science ®Google Scholar