Cross‐Linking via Electron Beam Treatment of a Tailored Polysilazane (ABSE) for Processing of Ceramic SiCN‐Fibers

References

• Heide , J. 2000 . Fortschritt‐Berichte VDI, Reihe Grund‐ und Werkstoffe/Kunststoffe Vol. 598 , 11 – 13 . Hamburg : VDI Verlag .
   Google Scholar
• Bunsell , A. R. and Berger , M.‐H. 1999 . Fine Ceramic Fibers Edited by: Bunsell , A. R. and Berger , M.‐H. New York : Marcel Dekker Inc .
   Google Scholar
• Clauss , B. 2002 . Keramische Verbundwerkstoffe (Ceramic Compounds) Edited by: Krenkel , W. 23 – 47 . Weinheim : WILEY‐VHC Verlag .
   Google Scholar
• Tressler , R. E. 1999 . Composites: Part A , 30 : 429 – 437 .
   Web of Science ®Google Scholar
• Fitzer , E. 1985 . Carbon Fibers and Their Composites Edited by: Fitzer , E. Berlin : Springer Verlag .
   Google Scholar
• Schmücker , M. 2004 . TU Contact Forschung Vol. 14 , 63 – 68 .
   Google Scholar
• Committee on Advanced Fibers for High‐Temperature Ceramic Composites National Materials Advisory Board Commission on Engineering and Technical Systems National Research Council . 1998 . 20 – 54 . Washington, D.C. : National Academy Press .
   Google Scholar
• Deléglise , F. , Berger , M. H. and Bunsell , A. R. 2000 . J. Eur. Ceram. Soc. , 22 : 1501
   Google Scholar
• Clauß , B. 2000 . Technische Textilien , 43 : 246 – 251 . (Technical textiles)
   Google Scholar
• Clade , J. , Spider , E. and Sporn , D. 2005 . J. Eur. Ceram. Soc. , 25 : 123 – 127 .
   Google Scholar
• Riedel , R. , Passing , G. , Schönfelder , H. and Brook , R. J. 1992 . Nature , 355 : 714
   Web of Science ®Google Scholar
• Riedel , R. , Seher , M. , Mayer , J. and Szabó , D.‐V. J. 1995 . J. Eur. Ceram. Soc. , 15 : 703
   Web of Science ®Google Scholar
• Riedel , R. 1996 . Materials Science and Technology Vol 17 B Edited by: Chan , R. W. , Haasen , P. , Kramer , E. J. and Brook , R. J. 1 Weinheim : VCH .
   Google Scholar
• Seyferth , D. and Wieseman , G. 1984 . J. Am. Ceram. Soc. , 67 : C‐132
   Google Scholar
• Salvetti , M. G. , Pijolat , M. , Soustelle , M. and Chassagneux , E. 1993 . Solid State Ionics , 63–65 : 332 – 339 .
   Google Scholar
• Schoenfelder , H. , Aldinger , F. and Riedel , R. 1993 . J. Phys. , IV : 1293 – 1298 .
   Google Scholar
• Riedel , R. 1993 . Nicht‐oxidische Keramiken aus anorganischen Vorstufen (Non‐oxidic ceramics made of anorganic precursors) Edited by: Petzow , G. and Jeglitsch , F. Stuttgart : Gebrüder Borntraeger Berlin . Metallkundlich‐Technische Reihe 12
   Google Scholar
• Ziegler , G. , Kleebe , H.‐J. , Motz , G. , Müller , H. , Weibelzahl , W. and Traßl , S. 1999 . J. Mater. Chem. Phys. , 61 : 55 – 63 .
   Web of Science ®Google Scholar
• Chollon , G. 2000 . J. Europ. Ceram. Soc. , 20 : 1959 – 1974 .
   Google Scholar
• Hacker , J. 2004 . “ Entwicklung einer preiswerten keramischen Fasern für den Anwendungsbereich bis 1400 Grad Celsius auf der Basis eines spinnfähigen siliciumorganischen Polymers (Development of a low‐cost ceramic fibre for applications up to 1400°C on the basis of a spinable silicon‐organic polymer) ” . University of Bayreuth . PhD Thesis
   Google Scholar
• Motz , G. , Hacker , J. and Ziegler , G. 2000 . Ceram. Eng. Sci. Proc. , 21 : 307 – 314 .
   Google Scholar
• Hacker , J. , Motz , G. and Ziegler , G. 2001 . Proc. of the High Temperature Ceramic Matrix Composites Edited by: Krenkel , W. , Naslain , R. and Schneider , H. 52 – 55 . Wiley‐VCH .
   Google Scholar
• Hacker , J. , Motz , G. and Ziegler , G. 2000 . Ceramic Materials and Components for Engines , : 653 – 656 .
   Google Scholar
• Takeda , M. , Imai , Y. , Ichikawa , H. and Ischikawa , T. 1991 . Ceram. Eng. Sci. Proc. , 12 : 1007 – 1018 .
   Google Scholar
• Kamimura , S. , Seguchi , T. and Okamura , K. 1999 . Rad. Phy. and Chem. , 54 : 575 – 581 .
   Google Scholar
• Motz , G. , Hacker , J. and Ziegler , G. 2002 . Ceram. Eng. Sci. Proc. , 23 ( 3 ) : 255 – 260 .
   Google Scholar
• DIN 16892 . 2000 . “ Rohre aus vernetztem Polyethylen hoher Dichte (PE‐X) Allgemeine Güteanforderungen, Prüfung, 6.5. Vernetzungsgrad” (Pipes made of cross‐linked high density polyethylene (PE‐X) Generally requirements in quality, proofing, 6.5 degree of cross linking) ” . Berlin : Beuth Verlag GmbH .
   Google Scholar
• Clough , R. L. 2001 . NIM, B , 185 : 8 – 33 .
   Web of Science ®Google Scholar
• Clealand , M. R. , Parks , L. A. and Cheng , S. 2003 . NIM, B. , 208 : 66 – 73 .
   Google Scholar
• Chmielewski , A. G. , Haji‐Saeid , M. and Ahmed , S. 2005 . NIM, B , 236 : 44 – 54 .
   Web of Science ®Google Scholar
• Trassl , S. , Motz , G. , Rössler , E. and Ziegler , G. 2002 . J. Am. Ceram. Soc. , 85 : 239 – 244 .
   Google Scholar
• Trassl , S. , Kleebe , H.‐J. , Störmer , H. , Motz , G. , Rössler , E. and Ziegler , G. 2002 . J. Am. Ceram. Soc. , 85 : 1268 – 1274 .
   Google Scholar
• Kleebe , H.‐J. 1998 . Phys. Stat. Sol. (a) , 166 : 297
   Google Scholar
• Kleebe , H.‐J. , Suttor , D. , Müller , H. and Ziegler , G. 1998 . J. Am. Ceram. Soc. , 81 ( 11 ) : 2971 – 2977 .
   Web of Science ®Google Scholar
• Iwamoto , Y. , Völger , W. , Kroke , E. and Riedel , R. 2001 . J. Am. Ceram. Soc. , 84 ( 10 ) : 2170 – 2178 .
   Web of Science ®Google Scholar