Truss topology optimization under uncertain nodal locations with proportional topology optimization method

References

• Achtziger, W. (2007). On simultaneous optimization of truss geometry and topology. Structural and Multidisciplinary Optimization 33(4–5):285–304. doi:10.1007/s00158-006-0092-0
   Google Scholar
• Achtziger, W., Bendsøe, M. P., Ben-Tal, A., Zowe, J. (1992). Equivalent displacement based formulations for maximum strength truss topology design. IMPACT of Computing in Science and Engineering 4(4):315–45. doi:10.1016/0899-8248(92)90005-s
   Google Scholar
• Achtziger, W., Stolpe, M. (2008). Global optimization of truss topology with discrete bar areas—Part I: Theory of relaxed problems. Computational Optimization and Applications 40(2):247–80. doi:10.1007/s10589-007-9138-5
   Web of Science ®Google Scholar
• Achtziger, W., Stolpe, M. (2009). Global optimization of truss topology with discrete bar areas—Part II: Implementation and numerical results. Computational Optimization and Applications 44(2):315–41. doi:10.1007/s10589-007-9152-7
   Web of Science ®Google Scholar
• Alvarez, F., Carrasco, M. (2005). Minimization of the expected compliance as an alternative approach to multiload truss optimization. Structural and Multidisciplinary Optimization 29(6):470–76. doi:10.1007/s00158-004-0488-7
   Web of Science ®Google Scholar
• Asadpoure, A., Tootkaboni, M., Guest, J. K. (2011). Robust topology optimization of structures with uncertainties in stiffness–Application to truss structures. Computers & Structures 89(11):1131–41. doi:10.1016/j.compstruc.2010.11.004
   Web of Science ®Google Scholar
• Bendsøe, M. P., Ben-Tal, A., Haftka, R. T. (1991). New displacement-based methods for optimal truss topology design. AIAA-91-1215-CP.
   Google Scholar
• Bendsøe, M. P., Sigmund, O. (2003). Topology optimization: Theory, methods and applications. Berlin Heidelberg: Springer.
   Google Scholar
• Ben-Tal, A., Bendsøe, M. P. (1993). A new method for optimal truss topology design. Siam Journal on Optimization 3(2):322–58. doi:10.1137/0803015
   Web of Science ®Google Scholar
• Ben-Tal, A., Nemirovski, A. (1997). Robust truss topology design via semidefinite programming. SIAM Journal on Optimization 7(4):991–1016. doi:10.1137/s1052623495291951
   Web of Science ®Google Scholar
• Biyikli, E., To, A. C. (2014). Proportional topology optimization: A new non-gradient method for solving stress constrained and minimum compliance problems and its implementation in MATLAB. arXiv preprint arXiv:1411.6884.
   Google Scholar
• Bojczuk, D., Mróz, Z. (1998). Optimal design of trusses with account for topology variation. Mechanics of Structures and Machines 26(1):21–40. doi:10.1080/08905459808945418
   Web of Science ®Google Scholar
• Calafiore, G. C., Dabbene, F. (2008). Optimization under uncertainty with applications to design of truss structures. Structural and Multidisciplinary Optimization 35(3):189–200. doi:10.1007/s00158-007-0145-z
   Web of Science ®Google Scholar
• Carrasco, M., Ivorra, B., Ramos, A. M. (2012). A variance-expected compliance model for structural optimization. Journal of Optimization Theory and Applications 152(1):136–51. doi:10.1007/s10957-011-9874-7
   Web of Science ®Google Scholar
• Csébfalvi, A (2014). A new theoretical approach for robust truss optimization with uncertain load directions. Mechanics Based Design of Structures and Machines 42(4):442–53. doi:10.1080/15397734.2014.880064
   Web of Science ®Google Scholar
• Doltsinis, I., Kang, Z. (2004). Robust design of structures using optimization methods. Computer Methods in Applied Mechanics and Engineering 193(23–26):2221–37. doi:10.1016/j.cma.2003.12.055
   Google Scholar
• Elishakoff, I., Haftka, R. T., Fang, J. (1994). Structural design under bounded uncertainty – Optimization with anti-optimization. Computers & Structures 53:1401–05. doi:10.1016/0045-7949(94)90405-7
   Web of Science ®Google Scholar
• Ganzerli, S., Pantelides, C. P. (2000). Optimum structural design via convex model superposition. Computers & Structures 74:639–47. doi:10.1016/s0045-7949(99)00077-2
   Web of Science ®Google Scholar
• Guest, J. K., Igusa, T. (2008). Structural optimization under uncertain loads and nodal locations. Computer Methods in Applied Mechanics and Engineering 198(1):116–24. doi:10.1016/j.cma.2008.04.009
   Web of Science ®Google Scholar
• Guo, X., Cheng, G. D., Olhoff, N. (2005). Optimum design of truss topology under buckling constraints. Structural and Multidisciplinary Optimization 30(3):169–80. doi:10.1007/s00158-004-0511-z
   Web of Science ®Google Scholar
• Guo, X., Cheng, G. D., Yamazaki, K. (2001). A new approach for the solution of singular optima in truss topology optimization with stress and local buckling constraints. Structural and Multidisciplinary Optimization 22(5):364–73. doi:10.1007/s00158-001-0156-0
   Web of Science ®Google Scholar
• Hashimoto, D., Kanno, Y. (2015). A semidefinite programming approach to robust truss topology optimization under uncertainty in locations of nodes. Structural and Multidisciplinary Optimization 51(2):439–61. doi:10.1007/s00158-014-1146-3
   Web of Science ®Google Scholar
• Jalalpour, M., Igusa, T., Guest, J. K. (2011). Optimal design of trusses with geometric imperfections: Accounting for global instability. International Journal of Solids and Structures 48(21):3011–19. doi:10.1016/j.ijsolstr.2011.06.020
   Web of Science ®Google Scholar
• Kanno, Y., Guo, X. (2010). A mixed integer programming for robust truss topology optimization with stress constraints. International Journal for Numerical Methods in Engineering 83(13):1675–99. doi:10.1002/nme.2871
   Web of Science ®Google Scholar
• Kawamura, H., Ohmori, H., Kito, N. (2002). Truss topology optimization by a modified genetic algorithm. Structural and Multidisciplinary Optimization 23(6):467–73. doi:10.1007/s00158-002-0208-0
   Web of Science ®Google Scholar
• Lombardi, M. (1998). Optimization of uncertain structures using non-probabilistic models. Computers & Structures 67(1):99–103. doi:10.1016/s0045-7949(97)00161-2
   Web of Science ®Google Scholar
• Michell, A. G. M. (1904). LVIII. The limits of economy of material in frame-structures. Philosophical Magazine and Journal of Science 8(47):589–97. doi:10.1080/14786440409463229
   Google Scholar
• Mohr, D. P., Stein, I., Matzies, T., Knapek, C. A. (2014). Redundant robust topology optimization of truss. Optimization and Engineering 15(4):945–72. doi:10.1007/s11081-013-9241-7
   Web of Science ®Google Scholar
• Park, Y. H., Choi, K. K. (1996). Design sensitivity analysis of truss structures with elastoplastic material. Mechanics of Structures and Machines 24(2):189–216. doi:10.1080/08905459608905261
   Web of Science ®Google Scholar
• Prager, W. (1970). Optimization of structural design. Journal of Optimization Theory and Application 6(1):1–21.
   Google Scholar
• Richardson, J. N., Coelho, R. F., Adriaenssens, S. (2015). Robust topology optimization of truss structures with random loading and material properties: A multiobjective perspective. Computers & Structures 154:41–47. doi:10.1016/j.compstruc.2015.03.011
   Web of Science ®Google Scholar
• Sandgren, E., Cameron, T. M. (2002). Robust design optimization of structures through consideration of variation. Computers & Structures 80:1605–13. doi:10.1016/s0045-7949(02)00160-8
   Web of Science ®Google Scholar
• Stolpe, M. (2004). Global optimization of minimum weight truss topology problems with stress, displacement, and local buckling constraints using branch-and-bound. International Journal for Numerical Methods in Engineering 61(8):1270–309. doi:10.1002/nme.1112
   Web of Science ®Google Scholar
• Stolpe, M. (2015). Truss optimization with discrete design variables: A critical review. Structural and Multidisciplinary Optimization 53:1–26. doi:10.1007/s00158-015-1333-x
   Web of Science ®Google Scholar