Investigation of semi-supported steel plate shear walls with different infill plates under cyclic loading

References

• Abualnour, M., A. Chikh, H. Hebali, A. Kaci, A. Tounsi, A. A. Bousahla, and A. Tounsi. 2019. Thermomechanical analysis of antisymmetric laminated reinforced composite plates using a new four variable trigonometric refined plate theory. Computers and Concrete 24 (6):489–98.
   Web of Science ®Google Scholar
• Alabduljabbar, H., J. H. Haido, R. Alyousef, S. T. Yousif, J. McConnell, K. Wakil, and K. Jermsittiparsert. 2020. Prediction of the flexural behavior of corroded concrete beams using combined method. Structures 25:1000–8. doi:10.1016/j.istruc.2020.03.057.
   Web of Science ®Google Scholar
• Alaskar, A.,. K. Wakil, R. Alyousef, K. Jermsittiparsert, L. S. Ho, H. Alabduljabbar, F. Alrshoudi, and A. M. Mohamed. 2020. Computational analysis of three dimensional steel frame structures through different stiffening members. Steel and Composite Structures 35 (2):187–97.
   Web of Science ®Google Scholar
• Alavi, E., and F. Nateghi. 2013. Experimental study on diagonally stiffened steel plate shear walls with central perforation. Journal of Constructional Steel Research 89:9–20. doi:10.1016/j.jcsr.2013.06.005.
   Web of Science ®Google Scholar
• Alinia, M. M., A. H. Jamshidi, and H. R. Habashi. 2012. The gusset plate effect in steel plate shear wall systems. Mechanics of Advanced Materials and Structures 19 (4):271–6. doi:10.1080/15376494.2011.642937.
   Web of Science ®Google Scholar
• Allam, O., K. Draiche, A. A. Bousahla, F. Bourada, A. Tounsi, K. H. Benrahou, S. R. Mahmoud, and E. A. Adda Bedia, and A. Tounsi. 2020. A generalized 4-unknown refined theory for bending and free vibration analysis of laminated composite and sandwich plates and shells. Computers and Concrete 26 (2):185–201.
   Web of Science ®Google Scholar
• Alyousef, R., H. Alabduljabbar, A. M. Mohamed, A. Alaskar, K. Jermsittiparsert, and L. S. Ho. 2020. A model to develop the porosity of concrete as important mechanical property. Smart Structures and Systems 26 (2):147–56.
   Web of Science ®Google Scholar
• Aminifar, F., M. R. Sheidaii, and S. Tariverdilo. 2020. Experimental investigation of parallel restrainers effects on buckling-restrained thin steel plate shear walls. Journal of Asian Architecture and Building Engineering. doi:10.1080/13467581.2020.1816548.
   Web of Science ®Google Scholar
• Arabnejad Khanouki, M. M., N. H. Ramli Sulong, and M. Shariati. 2011. Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying. Advanced Materials Research 168:2329–33. doi:10.4028/www.scientific.net/AMR.168-170.2329.
   Google Scholar
• Arabnejad Khanouki, M. M., N. H. Ramli Sulong, and M. Shariati. 2010. Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses. In Proceedings of the 4th International Conference on Steel Composite Structures, 21–3.
   Google Scholar
• Asteris, P. G., S. Nozhati, M. Nikoo, L. Cavaleri, and M. Nikoo. 2019. Krill herd algorithm-based neural network in structural seismic reliability evaluation. Mechanics of Advanced Materials and Structures 26 (13):1146–53. doi:10.1080/15376494.2018.1430874.
   Web of Science ®Google Scholar
• Belbachir, N., K. Draich, A. A. Bousahla, M. Bourada, A. Tounsi, and M. Mohammadimehr. 2019. Bending analysis of anti-symmetric cross-ply laminated plates under nonlinear thermal and mechanical loadings. Steel and Composite Structures 33 (1):81–92.
   Web of Science ®Google Scholar
• Belbachir, N., M. Bourada, K. Draiche, A. Tounsi, F. Bourada, A. A. Bousahla, and S. R. Mahmoud. 2020. Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory. Smart Structures and Systems 25 (4):409–22.
   Web of Science ®Google Scholar
• Berman, J., and M. Bruneau. 2003. Plastic analysis and design of steel plate shear walls. Journal of Structural Engineering 129 (11):1448–56. doi:10.1061/(ASCE)0733-9445(2003)129:11(1448).
   Web of Science ®Google Scholar
• Caccese, V., M. Elgaaly, and R. Chen. 1993. Experimental study of thin steel-plate shear walls under cyclic load. Journal of Structural Engineering 119 (2):573–87. doi:10.1061/(ASCE)0733-9445(1993)119:2(573).
   Web of Science ®Google Scholar
• Cao, Y., K. Wakil, R. Alyousef, K. Jermsittiparsert, L. S. Ho, H. Alabduljabbar, A. Alaskar, F. Alrshoudi, and A. M. Mohamed. 2020. Application of extreme learning machine in behavior of beam to column connections. Structures 25:861–7. doi:10.1016/j.istruc.2020.03.058.
   Web of Science ®Google Scholar
• Cao, Y., K. Wakil, R. Alyousef, S. T. Yousif, K. Jermsittiparsert, L. S. Ho, H. Alabduljabbar, A. Alaskar, F. Alrshoudi, and A. M. Mohamed. 2020. Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations. Earthquakes and Structures 18 (5):567–80.
   Web of Science ®Google Scholar
• Cao, Y., Q. Fan, S. M. Azar, R. Alyousef, S. T. Yousif, K. Wakil, K. Jermsittiparsert, L. S. Ho, H. Alabduljabbar, A. Alaskar, and A. Alaskar. 2020. Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer. Structures 27:118–27. doi:10.1016/j.istruc.2020.05.031.
   Web of Science ®Google Scholar
• Chen, S. J., and C. Jhang. 2011. Experimental study of low-yield-point steel plate shear wall under in-plane load. Journal of Constructional Steel Research 67 (6):977–85. doi:10.1016/j.jcsr.2011.01.011.
   Web of Science ®Google Scholar
• Choi, I. R., and H. G. Park. 2008. Ductility and energy dissipation capacity of shear-dominated steel plate walls. Journal of Structural Engineering 134 (9):1495–507. doi:10.1061/(ASCE)0733-9445(2008)134:9(1495).
   Web of Science ®Google Scholar
• Clayton, P. M., J. W. Berman, and L. N. Lowes. 2012. Seismic design and performance of self-centering steel plate shear walls. Journal of Structural Engineering 138 (1):22–30. doi:10.1061/(ASCE)ST.1943-541X.0000421.
   Web of Science ®Google Scholar
• Daie, M., A. Jalali, M. Suhatril, M. Shariati, M. A. Khanouki, A. Shariati, and P. Kazemi-Arbat. 2011. A new finite element investigation on pre-bent steel strips as damper for vibration control. International Journal of Physical Sciences 6 (36):8044–50.
   Google Scholar
• Draiche, K., A. A. Bousahla, A. Tounsi, A. S. Alwabli, A. Tounsi, and S. R. Mahmoud. 2019. Static analysis of laminated reinforced composite plates using a simple first-order shear deformation theory. Computers and Concrete 24 (4):369–78.
   Web of Science ®Google Scholar
• Farzampour, A., J. A. Laman, and M. Mofid. 2015. Behavior prediction of corrugated steel plate shear walls with openings. Journal of Constructional Steel Research 114:258–68. doi:10.1016/j.jcsr.2015.07.018.
   Web of Science ®Google Scholar
• Fu, Y., F. Wang, and M. Bruneau. 2017. Diagonal tension field inclination angle in steel plate shear walls. Journal of Structural Engineering 143 (7):04017058. doi:10.1061/(ASCE)ST.1943-541X.0001779.
   Web of Science ®Google Scholar
• Fujitani, H., H. Yamanouchi, I. Okawa, N. Sawai, N. Uchida, and T. Matsutani. 1996. Damage and performance of tall buildings in the 1995 Hyogoken Nanbu earthquake. In 67th Regional Conference (in conjunction with ASCE Structures Congress XIV), 103–25.
   Google Scholar
• Gu, X., L. Wang, W. Zhang, and W. Cui. 2018. Cyclic behaviour of hinged steel frames enhanced by masonry columns and/or infill walls with/without CFRP. Structure and Infrastructure Engineering 14 (11):1470–85. doi:10.1080/15732479.2018.1459742.
   Web of Science ®Google Scholar
• Hitaka, T., and C. Matsui. 2003. Experimental study on steel shear wall with slits. Journal of Structural Engineering 129 (5):586–95. doi:10.1061/(ASCE)0733-9445(2003)129:5(586).
   Web of Science ®Google Scholar
• Huang, L., Z. Zhou, Z. Zhang, and X. Huang. 2018. Seismic performance and fragility analyses of self-centering prestressed concrete frames with infill walls. Journal of Earthquake Engineering. doi:10.1080/13632469.2018.1526142.
   Google Scholar
• Ismail, Z. A., A. A. Mutalib, N. Hamzah, and S. Baharom. 2015. BIM technologies applications in IBS building maintenance. Jurnal Teknologi 74 (3):69–76. doi:10.11113/jt.v74.4554.
   Web of Science ®Google Scholar
• Jebelli, H., and M. Mofid. 2014. Effects of using low yield point steel in steel plate shear walls. The IES Journal Part A: Civil & Structural Engineering 7 (1):51–6.
   Google Scholar
• Kahrizi, M., and M. TahamouliRoudsari. 2019. Experimental and numerical investigation of the parameters affecting the behavior of steel frames with masonry infill walls anchored with the ADAS yielding damper. European Journal of Environmental and Civil Engineering. doi:10.1080/19648189.2018.1543057.
   Web of Science ®Google Scholar
• Khorami, M., H. Motahar, M. Alvansazyazdi, M. Shariati, A. Jalali, and M. M. Tahir. 2017. Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis. Structural Engineering & Mechanics 63 (2):259–68.
   Web of Science ®Google Scholar
• Khorami, M., M. Khorami, M. Alvansazyazdi, M. Shariati, Y. Zandi, A. Jalali, and M. M. Tahir. 2017. Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA). Earthquakes and Structures 13 (6):531–8.
   Web of Science ®Google Scholar
• Labibzadeh, M., and R. Hamidi. 2019. A comparison between shear capacities of two composite shear walls: DSCSWs and CSPSWs. Structural Engineering International 29 (2):276–81. doi:10.1080/10168664.2018.1544473.
   Web of Science ®Google Scholar
• Liu, C., X. Wu, K. Wakil, K. Jermsittiparsert, L. S. Ho, H. Alabduljabbar, A. Alaskar, F. Alrshoudi, R. Alyousef, and A. M. Mohamed. 2020. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns. Steel and Composite Structures 34 (5):743–67.
   Web of Science ®Google Scholar
• Misir, I. S., O. Ozcelik, S. C. Girgin, and U. Yucel. 2016. The behavior of infill walls in RC frames under combined bidirectional loading. Journal of Earthquake Engineering 20 (4):559–86. doi:10.1080/13632469.2015.1104748.
   Web of Science ®Google Scholar
• Moghimi, H., and R. G. Driver. 2013. Economical steel plate shear walls for low-seismic regions. Journal of Structural Engineering 139 (3):379–88. doi:10.1061/(ASCE)ST.1943-541X.0000662.
   Web of Science ®Google Scholar
• Mutlib, N. K., and S. Baharom. 2018. Quantification of delamination in a composite floor using a novel damage index. Nondestructive Testing and Evaluation 33 (4):405–26. doi:10.1080/10589759.2018.1484919.
   Web of Science ®Google Scholar
• Mutlib, N. K., S. B. Baharom, A. El‐Shafie, and M. Z. Nuawi. 2016. Ultrasonic health monitoring in structural engineering: Buildings and bridges. Structural Control and Health Monitoring 23 (3):409–22. doi:10.1002/stc.1800.
   Web of Science ®Google Scholar
• Mutlib, N. K., S. Baharom, M. Z. Nuawi, and A. El-Shafie. 2016. Ultrasonic surface wave monitoring for steel fibre-reinforced concrete using gel-coupled piezoceramic sensors: A case study. Arabian Journal for Science and Engineering 41 (4):1273–81. doi:10.1007/s13369-015-1925-1.
   Web of Science ®Google Scholar
• Naghipour, M., G. Yousofizinsaz, and M. Shariati. 2020. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines. Steel and Composite Structures 34 (3):347–59.
   Web of Science ®Google Scholar
• Poletti, E., G. Vasconcelos, and M. Jorge. 2014. Full-scale experimental testing of retrofitting techniques in Portuguese “Pombalino” traditional timber frame walls. Journal of Earthquake Engineering 18 (4):553–79. doi:10.1080/13632469.2014.897275.
   Web of Science ®Google Scholar
• Qi, C. C. 2020. Big data management in the mining industry. International Journal of Minerals, Metallurgy and Materials 27 (2):131–9. doi:10.1007/s12613-019-1937-z.
   Web of Science ®Google Scholar
• Qiu, J., Q. Zhao, C. Yu, and Z. Li. 2018. Experimental studies on cyclic behavior of corrugated steel plate shear walls. Journal of Structural Engineering 144 (11):04018200. doi:10.1061/(ASCE)ST.1943-541X.0002165.
   Web of Science ®Google Scholar
• Qu, B., and M. Bruneau. 2009. Capacity design of intermediate horizontal boundary elements of steel plate shear walls. Journal of Structural Engineering 136 (6):665–75. doi:10.1061/(ASCE)ST.1943-541X.0000167.
   Web of Science ®Google Scholar
• Sadat Kholerdi, S. E., E. Nazarimofrad, M. Farrokhzad, and U. Topal. 2018. Evaluation of the seismic behavior of semi-supported steel shear walls with different ratio and shape of openings. Australian Journal of Structural Engineering 19 (2):118–30. doi:10.1080/13287982.2018.1449620.
   Web of Science ®Google Scholar
• Sahla, M., H. Saidi, K. Draiche, A. A. Bousahla, F. Bourada, and A. Tounsi. 2019. Free vibration analysis of angle-ply laminated composite and soft core sandwich plates. Steel and Composite Structures 33 (5):663–79.
   Web of Science ®Google Scholar
• Shah, S. N. R., N. R. Sulong, M. Shariati, and M. Z. Jumaat. 2015. Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods. PloS One 10 (10):e0139422. doi:10.1371/journal.pone.0139422.
   PubMed Web of Science ®Google Scholar
• Shariati, M. 2013. Behaviour of C-shaped shear connectors in stell concrete composite beams. (Doctoral dissertation, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya).
   Google Scholar
• Shariati, M., A. Toghroli, A. Jalali, and Z. Ibrahim. 2017. Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading. In 5th International conference on advances in civil, structural and mechanical engineering—CSM.
   Google Scholar
• Shariati, M., F. Tahmasbi, P. Mehrabi, A. Bahadori, and A. Toghroli. 2020. Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: An experimental investigation. Steel and Composite Structures 35 (2):237–47.
   Web of Science ®Google Scholar
• Shariati, M., M. Ghorbani, M. Naghipour, N. Alinejad, and A. Toghroli. 2020. The effect of RBS connection on energy absorption in tall buildings with braced tube frame system. Steel and Composite Structures 34 (3):393–407.
   Web of Science ®Google Scholar
• Shariati, M., M. M. Tahir, T. C. Wee, S. N. R. Shah, A. Jalali, M. M. Abdullahi, and M. Khorami. 2018. Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections. Engineering Failure Analysis 85:149–66. doi:10.1016/j.engfailanal.2017.08.014.
   Web of Science ®Google Scholar
• Shariati, M., M. Naghipour, G. Yousofizinsaz, A. Toghroli, and N. P. Tabarestani. 2020. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines. Steel and Composite Structures 34 (3):377–91.
   Web of Science ®Google Scholar
• Shariati, M., M. S. Mafipour, B. Ghahremani, F. Azarhomayun, M. Ahmadi, N. T. Trung, and A. Shariati. 2020. A novel hybrid extreme learning machine–grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement. Engineering with Computers. doi:10.1007/s00366-020-01081-0.
   Web of Science ®Google Scholar
• Shariati, M., M. S. Mafipour, J. H. Haido, S. T. Yousif, A. Toghroli, N. T. Trung, and A. Shariati. 2020. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS). Steel and Composite Structures 34 (1):155–70.
   Web of Science ®Google Scholar
• Shariati, M., M. S. Mafipour, P. Mehrabi, A. Bahadori, Y. Zandi, M. N. A. Salih, H. Nguyen, J. Dou, X. Song, and S. Poi-Ngian. 2019. Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete. Applied Sciences 9 (24):5534. doi:10.3390/app9245534.
   Google Scholar
• Shariati, M., M. S. Mafipour, P. Mehrabi, M. Ahmadi, K. Wakil, N. T. Trung, and A. Toghroli. 2020. Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm). Smart Structures and Systems 25 (2):183–95.
   Web of Science ®Google Scholar
• Shariati, M., M. S. Mafipour, P. Mehrabi, M. Shariati, and A. Toghroli. 2020. A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques. Engineering with Computers. doi:10.1007/s00366-019-00930-x.
   Web of Science ®Google Scholar
• Shariati, M., M. S. Mafipour, P. Mehrabi, Y. Zandi, D. Dehghani, A. Bahadori, A. Shariati, N. T. Trung, M. N. A. Salih and S. Poi-Ngian. 2019. Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures. Steel and Composite Structures 33 (3):319–32.
   Web of Science ®Google Scholar
• Shariati, M., N. R. Sulong, and M. A. Khanouki. 2012. Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete. Materials & Design 34:325–31.
   Web of Science ®Google Scholar
• Shariati, M., N. R. Sulong, M. Suhatril, A. Shariati, M. A. Khanouki, and H. Sinaei. 2012. Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study. Materials & Design 41:67–73. doi:10.1016/j.matdes.2012.04.039.
   Web of Science ®Google Scholar
• Shariati, M., N. T. Trung, K. Wakil, P. Mehrabi, M. Safa, and M. Khorami. 2019. Moment-rotation estimation of steel rack connection using extreme learning machine. Steel and Composite Structures 31 (5):427–35.
   Google Scholar
• Shariati, M., S. S. Faegh, P. Mehrabi, S. Bahavarnia, Y. Zandi, D. R. Masoom, A. Toghroli, N.-T. Trung, and M. N. Salih. 2019. Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings. Steel and Composite Structures 33 (4):569–81.
   Web of Science ®Google Scholar
• Singh, A. K., N. Kumari, A. Chattopadhyay, and S. A. Sahu. 2016. Smooth moving punch in an initially stressed transversely isotropic magnetoelastic medium due to shear wave. Mechanics of Advanced Materials and Structures 23 (7):774–83. doi:10.1080/15376494.2015.1029161.
   Web of Science ®Google Scholar
• Tian, W., J. Hao, and C. Fan. 2016. Analysis of thin steel plate shear walls using the three-strip model. Journal of Structural Engineering 142 (5):04015169. doi:10.1061/(ASCE)ST.1943-541X.0001451.
   Web of Science ®Google Scholar
• Trung, N. T., A. F. Shahgoli, Y. Zandi, M. Shariati, K. Wakil, M. Safa, and M. Khorami. 2019. Moment-rotation prediction of precast beam-to-column connections using extreme learning machine. Structural Engineering and Mechanics 70 (5):639–47.
   Web of Science ®Google Scholar
• Wang, J. J., M. X. Tao, J. S. Fan, and X. Nie. 2018. Seismic behavior of steel plate reinforced concrete composite shear walls under tension-bending-shear combined cyclic load. Journal of Structural Engineering 144 (7):04018075. doi:10.1061/(ASCE)ST.1943-541X.0002073.
   Web of Science ®Google Scholar
• Wang, W.,. J. Kong, Y. Zhang, G. Chu, and Y. Chen. 2018. Seismic behavior of self-centering modular panel with slit steel plate shear walls: Experimental testing. Journal of Structural Engineering 144 (1):04017179. doi:10.1061/(ASCE)ST.1943-541X.0001932.
   Web of Science ®Google Scholar
• Zhao, X., A. Fourie, and C. C. Qi. 2019. An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon. International Journal of Minerals, Metallurgy, and Materials 26 (10):1206–16. doi:10.1007/s12613-019-1885-7.
   Web of Science ®Google Scholar
• Zhao, X., A. Fourie, and C. C. Qi. 2020. Mechanics and safety issues in tailing-based backfill: A review. International Journal of Minerals, Metallurgy and Materials 27 (9):1165–78. doi:10.1007/s12613-020-2004-5.
   Web of Science ®Google Scholar
• Zhao, X., A. Fourie, R. Veenstra, and C. C. Qi. 2020. Safety of barricades in cemented paste-backfilled stopes. International Journal of Minerals, Metallurgy and Materials 27 (8):1054–64. doi:10.1007/s12613-020-2006-3.
   Web of Science ®Google Scholar
• Zhou, X., D. Sha, and K. K. Tamma. 2012. A New Hybrid Computational Framework and Validations for Handling Steady-State Problems with Contact Boundaries. Mechanics of Advanced Materials and Structures 19 (1-3):144–68. doi:10.1080/15376494.2011.572244.
   Web of Science ®Google Scholar