Study on energy absorption characteristics of expansion tube with light magnesium alloy

References

• Almeida, B. P. P., M. L. Alves, P. A. R. Rosa, A. G. Brito, and P. A. F. Martins. 2006. Expansion and reduction of thin-walled tubes using a die: Experimental and theoretical investigation. International Journal of Machine Tools and Manufacture 46 (12–13):1643–52. doi:10.1016/j.ijmachtools.2005.08.018.
   Web of Science ®Google Scholar
• Altenhof, W. J., W. Ames, P. R. Frise, and F. Ghrib. 2003. A comparison of the crashworthiness performance of geometrically identical aluminium and magnesium steering wheel armatures. International Journal of Crashworthiness 8 (3):237–46. doi:10.1533/ijcr.2003.0230.
   Web of Science ®Google Scholar
• Carolan, M., D. Tyrell, and A. B. Perlman. 2007. Performance efficiency of a crash energy management system. ASME/IEEE 2007 Joint Rail Conference and Internal Combustion Engine Division Spring Technical Conference, New York, American Society of Mechanical Engineers, 105–115 doi:10.1115/JRC/ICE2007-40064.
   Google Scholar
• Chen, J., E. Li, Q. Li, S. Hou, and X. Han. 2022. Crashworthiness and optimization of novel concave thin-walled tubes. Composite Structures 283:115109. doi:10.1016/j.compstruct.2021.115109.
   Web of Science ®Google Scholar
• Choi, W. M., J. S. Kim, H. S. Jung, and T. S. Kwon. 2011. Effect of die angle on energy absorbing characteristics of tube-type crash elements. International Journal of Automotive Technology 12 (3):383–9. doi:10.1007/s12239-011-0045-5.
   Web of Science ®Google Scholar
• Choi, W. M., T. S. Kwon, H. S. Jung, and J. S. Kim. 2012. Influence of impact velocity on energy absorption characteristics and friction coefficient of expansion tube. International Journal of Crashworthiness 17 (6):621–9. doi:10.1080/13588265.2012.704188.
   Web of Science ®Google Scholar
• Daxner, T., F. G. Rammerstorfer, and F. D. Fischer. 2005. Instability phenomena during the conical expansion of circular cylindrical shells. Computer Methods in Applied Mechanics and Engineering 194 (21–24):2591–603. doi:10.1016/j.cma.2004.07.047.
   Web of Science ®Google Scholar
• Easton, M., W. Q. Song, and T. Abbott. 2006. A comparison of the deformation of magnesium alloys with aluminium and steel in tension, bending and buckling. Materials and Design 27 (10):935–46. doi:10.1016/j.matdes.2005.03.005.
   Web of Science ®Google Scholar
• Feng, F., S. Huang, Z. Meng, J. Hu, Y. Lei, M. Zhou, D. Wu, and Z. Yang. 2014. Experimental study on tensile property of az31b magnesium alloy at different high strain rates and temperatures. Materials and Design 57 (5):10–20. doi:10.1016/j.matdes.2013.12.031.
   Google Scholar
• Fischer, F. D., F. G. Rammerstorfer, and T. Daxner. 2006. Flaring—An analytical approach. International Journal of Mechanical Sciences 48 (11):1246–55. doi:10.1016/j.ijmecsci.2006.06.004.
   Web of Science ®Google Scholar
• Joost, W. J., and P. E. Krajewski. 2017. Towards magnesium alloys for high-volume automotive applications. Scripta Materialia 128:107–12. doi:10.1016/j.scriptamat.2016.07.035.
   Web of Science ®Google Scholar
• Karrech, A, and A. Seibi. 2010. Analytical model for the expansion of tubes under tension. Journal of Materials Processing Technology 210 (2):356–62. doi:10.1016/j.jmatprotec.2009.09.024.
   Web of Science ®Google Scholar
• Li, Q. Q., E. Li, T. Chen, L. Wu, G. Q. Wang, and Z. C. He. 2021. Improve the frontal crashworthiness of vehicle through the design of front rail. Thin-Walled Structures 162:107588. doi:10.1016/j.tws.2021.107588.
   Web of Science ®Google Scholar
• Liu, Y. Z, and X. M. Qiu. 2016. A theoretical study of the expansion metal tubes. International Journal of Mechanical Sciences 114:157–65. doi:10.1016/j.ijmecsci.2016.05.014.
   Web of Science ®Google Scholar
• Luo, A. A. 2002. Magnesium: Current and potential automotive applications. JOM Journal of the Minerals Metals and Materials Society 54 (2):42–8. doi:10.1007/BF02701073.
   Web of Science ®Google Scholar
• Luo, M., J. Yang, H. Liu, G. Lu, and J. Yu. 2019. Energy absorption of expansion tubes using a conical-cylindrical die: Theoretical model. International Journal of Mechanical Sciences 157–158:207–20. doi:10.1016/j.ijmecsci.2019.04.033.
   Web of Science ®Google Scholar
• Mallon, P., B. Perlman, and D. Tyrell. 2008. The influence of manufacturing variations on a crash energy management system. ASME 2008 Rail Transportation Division Fall Technical Conference, New York, American Society of Mechanical Engineers, 107–116 doi:10.1115/RTDF2008-74021.
   Google Scholar
• Martinez, E., D. Tyrell, R. Rancatore, et al. 2005. A crush zone design for an existing passenger rail cab car. ASME 2005 International Mechanical Engineering Congress and Exposition, New York, American Society of Mechanical Engineers, 85–94 doi:10.1115/IMECE2005-82769.
   Google Scholar
• Mayville, R. A., K. N. Johnson, R. G. Stringfellow, et al. 2003. The development of a rail passenger coach car crush zone. IEEE/ASME 2003 Joint Rail Conference. New York: American Society of Mechanical Engineers, 55–61 doi:10.1115/RTD2003-1653.
   Google Scholar
• Moreno, C. 2015. Identification, test and performance prediction of a novel energy absorbing mechanism for railway vehicles. Coventry: The University of Warwick.
   Google Scholar
• Parrish, A., R. R. Masoud, and A. Najafi. 2012. Crashworthiness optimisation of vehicle structures with magnesium alloy parts. International Journal of Crashworthiness 17 (3):259–81. doi:10.1080/13588265.2011.648518.
   Web of Science ®Google Scholar
• Seibi, A. C., S. Al-Hiddabi, and T. Pervez. 2005. Structural behavior of a solid tubular under large radial plastic expansion. Journal of Energy Resources Technology 127 (4):323–7. doi:10.1115/1.1926309.
   Web of Science ®Google Scholar
• Severson, K. J., D. C. Tyrell, and A. B. Perlman. 2003. Collision safety comparison of conventional and crash energy management passenger rail car designs. Proceedings of the 2003 IEEE/ASME Joint Rail Conference, IEEE, 83–90
   Google Scholar
• Shakeri, M., S. Salehghaffari, and R. Mirzaeifar. 2007. Expansion of circular tubes by rigid tubes as impact energy absorbers: Experimental and theoretical investigation. International Journal of Crashworthiness 12 (5):493–501. doi:10.1080/13588260701483540.
   Web of Science ®Google Scholar
• Simic, G., V. Lucanin, and D. Milkovic. 2006. Elements of passive safety of railway vehicles in collision. International Journal of Crashworthiness 11 (4):357–69. doi:10.1533/ijcr.2005.0111.
   Web of Science ®Google Scholar
• Steglich, D., X. Tian, J. Bohlen, S. Riekehr, N. Kashaev, K. U. Kainer, and N. Huber. 2015. Experimental and numerical crushing analyses of thin-walled magnesium profiles. International Journal of Crashworthiness 20 (2):177–90. doi:10.1080/13588265.2014.996319.
   Web of Science ®Google Scholar
• Tan, H. L., Z. C. He, E. Li, X. W. Tan, A. G. Cheng, and Q. Q. Li. 2020. Energy absorption characteristics of three-layered sandwich panels with graded re-entrant hierarchical honeycombs cores. Aerospace Science and Technology 106:106073. doi:10.1016/j.ast.2020.106073.
   Web of Science ®Google Scholar
• Tan, H. L., Z. C. He, K. X. Li, E. Li, A. G. Cheng, and B. Xu. 2019. In-plane crashworthiness of re-entrant hierarchical honeycombs with negative Poisson's ratio. Composite Structures 229 (Dec):111415.1–.15. doi:10.1016/j.compstruct.2019.111415.
   Google Scholar
• Tan, H., Z. He, E. Li, A. Cheng, T. Chen, X. Tan, Q. Li, and B. Xu. 2021. Crashworthiness design and multi-objective optimization of a novel auxetic hierarchical honeycomb crash box. Structural and Multidisciplinary Optimization 64 (4):2009–16. doi:10.1007/s00158-021-02961-9.
   Web of Science ®Google Scholar
• Tari, D. G., M. J. Worswick, U. Ali, and M. A. Gharghouri. 2014. Mechanical response of az31b magnesium alloy: Experimental characterization and material modeling considering proportional loading at room temperature. International Journal of Plasticity 55:247–67. doi:10.1016/j.ijplas.2013.10.006.
   Web of Science ®Google Scholar
• Xue, X., F. Schmid, and R. A. Smith. 2007. Analysis of the structural characteristics of an intermediate rail vehicle and their effect on vehicle crash performance. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 221 (3):339–52. doi:10.1243/09544097JRRT77.
   Web of Science ®Google Scholar
• Yan, J., S. Yao, P. Xu, Y. Peng, H. Shao, and S. Zhao. 2016. Theoretical prediction and numerical studies of expanding circular tubes as energy absorbers. International Journal of Mechanical Sciences 105:206–14. doi:10.1016/j.ijmecsci.2015.11.022.
   Web of Science ®Google Scholar
• Yang, J., M. Luo, Y. Hua, and G. Lu. 2010. Energy absorption of expansion tubes using a conical–cylindrical die: Experiments and numerical simulation. International Journal of Mechanical Sciences 52 (5):716–25. doi:10.1016/j.ijmecsci.2009.11.015.
   Web of Science ®Google Scholar
• Yoon, J., Y. Lee, and H. Huh. 2013. Investigation of deformation and collapse mechanism for magnesium tube in axial crushing test. Journal of Mechanical Science and Technology 27 (10):2917–21. doi:10.1007/s12206-013-0803-6.
   Web of Science ®Google Scholar
• Zhou, P., E. Beeh, and H. E. Friedrich. 2016. Influence of tension-compression asymmetry on the mechanical behaviour of az31b magnesium alloy sheets in bending. Journal of Materials Engineering and Performance 25 (3):853–65. doi:10.1007/s11665-016-1961-3.
   Web of Science ®Google Scholar
• Zhu, T., B-z Yang, C. Yang, S-n Xiao, G-w Yang, and B. Yang. 2018. The mechanism for the coupler and draft gear and its influence on safety during a train collision. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility 56 (9):1375–93. doi:10.1080/00423114.2017.1413198.
   Web of Science ®Google Scholar