An investigation of hybrid models FEA coupled with AHP-ELECTRE, RSM-GA, and ANN-GA into the process parameter optimization of high-quality deep-drawn cylindrical copper cups

References

• Abdelmaguid, T. F., R. K. Abdel-Magied, M. Shazl, and A. S. Wifi. 2013. Adynamic programming approach for minimizing the number of drawing stages and heat treatments in cylindrical shell multistage deep drawing. Computers & Industrial Engineering 66 (3):525–32. doi:10.1016/j.cie.2012.10.004.
   Web of Science ®Google Scholar
• Afshari, A. R., M. Mojahed, R. M. Yusuff, T. S. Hong, and M. Y. Ismail. 2010. Personnel selection using ELECTRE. Journal of Applied Sciences 10 (23):3068–75. doi:10.3923/jas.2010.3068.3075.
   Google Scholar
• Agrebi, M., M. Abed, and M. N. Omri. 2017. ELECTRE I Based Relevance Decision-Makers Feedback to the Location Selection of Distribution Centers. Journal of Advanced Transportation 2017:1–10. doi:10.1155/2017/7131094.
   Google Scholar
• Akyüz, Y, and M. Soba. 2013. ELECTRE Yöntemiyle Tekstil Sektöründe Optimal Kuruluş Yeri Seçimi: Uşak İli Örneği. Uluslararası Yönetim İktisat ve İşletme Dergisi 9 (19):185–98.
   Google Scholar
• Ashayeri, J, and J. M. Rongen. 1997. Central distribution in Europe: A multi − criteria approach to location selection. The International Journal of Logistics Management 8 (1):97–109. doi:10.1108/09574099710805628.
   Google Scholar
• Babu, D., V. Thangarasu, and A. Ramanathan. 2020. Artificial neural network approach on forecasting diesel engine characteristics fuelled with waste frying oil biodiesel. Applied Energy 263:114612. doi:10.1016/j.apenergy.2020.114612.
   Web of Science ®Google Scholar
• Badhwar, P., A. Kumar, A. Yadav, P. Kumar, R. Siwach, D. Chhabra, and K. K. Dubey. 2020. Improved pullulan production and process optimization using novel GA-ANN and GA-ANFIS hybrid statistical tools. Biomolecules 10(1):124. doi:10.3390/biom10010124.
   PubMedGoogle Scholar
• Bai, S.-Z., R.-Z. Meng, and S.-T. Zhang. 2010. Research on location selection of dairy distribution center. In Proceedings of the International Conference on Logistics Systems and Intelligent Management (ICLSIM ’10), vol. 2, 898–901. Harbin, China: IEEE.
   Google Scholar
• Bari, F, and V. Leung. 2007. Application of ELECTRE to Network Selection in a Hetereogeneous Wireless Network Environment. In IEEE Communications Society-WCNC 2007 Proceedings. 3813–8. doi:10.1109/WCNC.2007.697.
   Google Scholar
• Barletta, M., A. Gisario, L. Palagi, and L. Silvestri. 2014. Modelling the Electrostatic Fluidised Bed (EFB) coating process using Support Vector Machines (SVMs). Powder Technology. 258:85–93. doi:10.1016/j.powtec.2014.03.017.
   Google Scholar
• Bhardwaj, B., R. Kumar, and P. K. Singh. 2014. Prediction of surface roughness in turning of EN 353 using response surface methodology. Transactions of the Indian Institute of Metals 67 (3):305–13. doi:10.1007/s12666-013-0346-7.
   Web of Science ®Google Scholar
• Chaiwuttisak, P., H. Smith, Y. Wu, C. Potts, T. Sakuldamrongpanich, and S. Pathomsiri. 2016. Location of low-cost blood collection and distribution centres in Thailand. Operations Research for Health Care 9:7–15. doi:10.1016/j.orhc.2016.02.001.
   Web of Science ®Google Scholar
• Chan, L. C., M. W. Fu, N. Li, and J. Lu. 2010. FEA-aided design of multi-stage drawing process and tooling for production of a miniature sheet metal component. The International Journal of Advanced Manufacturing Technology 46 (9-12):993–1000. doi:10.1007/s00170-009-2163-z.
   Web of Science ®Google Scholar
• Chatterjee, P., S. Mondal, and S. Chakraborty. 2014. A comprehensive solution to automated inspection device selection problems using ELECTRE methods. International Journal of Technology 5 (2):193–208. doi:10.14716/ijtech.v5i2.410.
   Google Scholar
• Chelladurai, S. J. S., R. Arthanari, A. N. Thangaraj, and H. Sekar. 2017. Dry sliding wear characterization of squeeze cast LM13/FeCu composite using response surface methodology. China Foundry 14 (6):525–33. doi:10.1007/s41230-017-7101-3.
   Web of Science ®Google Scholar
• Colgan, M, and J. Monaghan. 2003. Deep drawing process: Analysis and experiment. Journal of Materials Processing Technology 132 (1-3):35–41. doi:10.1016/S0924-0136(02)00253-4.
   Web of Science ®Google Scholar
• Collette, C, and P. Siarry. 2009. Multiobjective optimization. London, UK: Editions Eyrolles.
   Google Scholar
• Davim, J. P. Ed. 2012. Statistical and computational techniques in manufacturing. Springer: Berlin Heidelberg. doi:10.1007/978-3-642-25859-6.
   Google Scholar
• Davim, J. P. 2014. Modern mechanical engineering: Research, development and education (Materials Forming, Machining and Tribology). Berlin Heidelberg: Springer-Verlag.. doi:10.1007/978-3-642-45176-8.
   Google Scholar
• Deshwal, S. 2020. Exercising hybrid statistical tools GA-RSM, GA-ANN and GA-ANFIS to optimize FDM process parameters for tensile strength improvement.
   Google Scholar
• Deswal, S., R. Narang, and D. Chhabra. 2019. Modeling and parametric optimization of FDM 3D printing process using hybrid techniques for enhancing dimensional preciseness. International Journal on Interactive Design and Manufacturing (IJIDeM) 13 (3):1197–214. doi:10.1007/s12008-019-00536-z.
   Google Scholar
• Ertuğrul, İ, and N. Karakaşoğlu. 2010. ELECTRE ve Bulanık AHP Yöntemleri ile Bir işletme için Bilgisayar Seçimi. Dokuz Eylül Üniversitesi İktisadi ve İdari Bilimler Fakültesi Dergisi 25 (2):23–43.
   Google Scholar
• Faraji, G., M. M. Mashhadi, and R. Hashemi. 2010. Using the finite element method for achieving an extra high limiting drawing ratio (LDR) of 9 for cylindrical components. CIRP Journal of Manufacturing Science and Technology.3 (4):262–7. doi:10.1016/j.cirpj.2010.12.003.
   Google Scholar
• Fei, C., C. Yan, and Z. Li-wei. 2007. Model for selecting location of logistics distribution center. In Proceedings of the IEEE International Conference on Grey Systems and Intelligent Services (GSIS ’07), 1208–11.
   Google Scholar
• Fei, T., L. Zhang, Y. Sun, L. Chen, and H. Ren. 2016. The location selection of distribution centre based on DNA artificial fish swarm algorithm. Journal of Computational and Theoretical Nanoscience 13 (2):1406–14. doi:10.1166/jctn.2016.5061.
   Google Scholar
• Gopalakannan, S, and T. Senthilvelan. 2013. Application of response surface method on machining of Al–SiC nano-composites. Measurement 46 (8):2705–15. doi:10.1016/j.measurement.2013.04.036.
   Web of Science ®Google Scholar
• Grüner, M, and M. Merklein. 2014. Determination of friction coefficients in deep drawing by modification of Siebel’s formula for calculation of ideal drawing force. Production Engineering 8 (5):577–84. doi:10.1007/s11740-014-0551-1.
   Google Scholar
• Hekmatfar, M., and R. Z. Farahani, Eds. 2009. Facility Location: Concepts, Models, Algorithms and Case Studies, Physica. Springer-Verlag, Berlin Heidelberg, 2009.
   Google Scholar
• Hu, W., Y. Hou, L. Tian, and Y. Li. 2015. Selection of logistics distribution center location for SDN enterprises. Journal of Management Analytics 2 (3):202–15. doi:10.1080/23270012.2015.1077481.
   Web of Science ®Google Scholar
• Hua, X., X. Hu, and W. Yuan. 2016. Research optimization on logistics distribution center location based on adaptive particle swarm algorithm. Optik—International Journal for Light and Electron Optics 127 (20):8443–50. doi:10.1016/j.ijleo.2016.06.032.
   Google Scholar
• Huang, D.-S., V. Bevilacqua, and P. Premaratne, Eds., 2016. vol. 9771 of Lecture notes in computer science, 651–8. New York, NY, USA: Springer.
   Google Scholar
• Idil, A. A., T. Gogce, and O. H. Tugba. 2009. Treatment of azo dye production wastewaters using Photo-Fenton like advanced oxidation processes: Optimization by response surface methodology. Journal of Photochemistry and Photobiology A: Chemistry 202:142–53.
   Web of Science ®Google Scholar
• ISO 12004-2:2008(2004) 2008. Metallic materials — sheet and strip — determination of forming-limit curves — part 2: determination of forming-limit curves in the laboratory.
   Google Scholar
• Jain, A. K., J. Mao, and K. K. Mohiuddin. 1996. artificial neural networks: A tutorial. Computer (Long Beach Calif) 29 (3):31–44. doi:10.1109/2.485891.
   Web of Science ®Google Scholar
• Jalali, T., M. Jafari, and A. Mohammadi. 2019. Genetic algorithm optimization of antireflection coating consisting of nanostructured thin films to enhance silicon solar cell efficacy. Materials Science & Engineering B 247:1–8.
   Google Scholar
• Jean, M., C. Liu, and J. Wang. 2005. Design and development of artificial neural networks for depositing powders in coating treatment. Applied Surface Science 245 (1-4):290–303. doi:10.1016/j.apsusc.2004.10.041.
   Web of Science ®Google Scholar
• Kalaimathi, M., G. Venkatachalam, and M. Sivakumar. 2014. Experimental investigations on the electrochemical machining characteristics of monel 400 alloys and optimization of process parameters. Jordan Journal of Mechanical and Industrial Engineering 8:143–51.
   Google Scholar
• Karacasu, M, and N. Yayla. 2004. A Decision Support Model Proposal for Privatization of Public Bus Transportation: Eskisehir Sample. ITU Journal/Engineering 3 (6):59–70.
   Google Scholar
• Kaushik, V. S., M. Subramanian, and M. Sakthivel. 2018. Optimization of processes parameters on temperature rise in CNC end milling of Al 7068 using hybrid techniques. Materials Today: Proceedings 5 (2):7037–46. doi:10.1016/j.matpr.2017.11.367.
   Google Scholar
• Kim, S. H., S. H. Kim, and H. Huh. 2002. Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis. International Journal of Machine Tools and Manufacture 42 (7):863–75. doi:10.1016/S0890-6955(02)00003-2.
   Web of Science ®Google Scholar
• Kim, H. S, and M. Koç. 2008. Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions. Journal of Materials Processing Technology 204 (1-3):370–83. doi:10.1016/j.jmatprotec.2007.11.059.
   Web of Science ®Google Scholar
• Kumar, B. A., N. Murugan, and I. Dinaharan. 2014. Dry sliding wear behavior of stir cast AA6061-T6/AlNp composite. Transactions of Nonferrous Metals Society of China 24 (9):2785–95. doi:10.1016/S1003-6326(14)63410-5.
   Web of Science ®Google Scholar
• Lin, C, and C. T. Kwan. 2009. Application of abductive network and FEM to predict the optimal blank contour of an elliptic cylindrical cup from deep drawing. Journal of Materials Processing Technology 209 (3):1351–61. doi:10.1016/j.jmatprotec.2008.03.042.
   Web of Science ®Google Scholar
• Lin, Y. C., C. C. Tsao, C. Y. Hsu, S. K. Hung, and D. C. Wen. 2012. Evaluation of the characteristics of the micro electrical discharge machining process using response surface methodology based on the central composite design. The International Journal of Advanced Manufacturing Technology 62 (9-12):1013–23. doi:10.1007/s00170-011-3745-0.
   Web of Science ®Google Scholar
• Liu, N, and F. Fang. 2011. Effects of property parameters and blank holding force on the deformability of sheet metal in deep drawing. In Second Int. Conf. on Mechanic Automation and Control Engineering (Hohhot), 263–6
   Google Scholar
• Ma, Z., W. Zhang, Z. Luo, X. Sun, Z. Li, and L. Lin. 2020. Ultrasonic characterization of thermal barrier coatings porosity through BP neural network optimizing Gaussian process regression algorithm. Ultrasonics 100:105981. doi: 10.1016/j.ultras.2019.105981105981.
   PubMed Web of Science ®Google Scholar
• Manjunatha, B., H. B. Niranjan, and K. G. Satyanarayana. 2018. Effect of amount of boron carbide on wear loss of Al-6061 matrix composite by Taguchi technique and Response surface analysis. Materials Science Engineering. 376:1–12.
   Google Scholar
• Morovvati, M. R., B. Mollaei-Dariani, and M. Haddadzadeh. 2010. Initial blank optimization in multilayer deep drawing process using GONNSJ. Manuf. Sci. Eng. 132:061014.
   Web of Science ®Google Scholar
• Moses, J. J., I. Dinaharan, and S. J. Sekhar. 2016. Prediction of influence of process parameters on tensile strength of AA6061/TiC aluminum matrix composites. Transactions of Nonferrous Metals Society of China 26 (6):1498–511. doi:10.1016/S1003-6326(16)64256-5.
   Web of Science ®Google Scholar
• Nepershin, R. I. 2014. Deep drawing of a thin-walled hemisphere. Journal of Machinery Manufacture and Reliability 43 (1):60–8. doi:10.3103/S1052618814010154.
   Google Scholar
• Niranjan, K, and P. R. Lakshminarayanan. 2013. Optimization of process parameters for in situ casting of Al/TiB2 composites through response surface methodology. Transactions of Nonferrous Metals Society of China 23 (5):1269–74. doi:10.1016/S1003-6326(13)62592-3.
   Web of Science ®Google Scholar
• Norese, M. F. 2006. ELECTRE III as a support for participatory decision-making on the localisation of waste-treatment plants. Land Use Policy 23 (1):76–85. doi:10.1016/j.landusepol.2004.08.009.
   Web of Science ®Google Scholar
• Nozick, L. K, and M. A. Turnquist. 1998. Integrating inventory impacts into a fixed-charge model for locating distribution centers. Transportation Research Part E: Logistics and Transportation Review 34 (3):173–86. doi:10.1016/S1366-5545(98)00010-6.
   Web of Science ®Google Scholar
• Parida, A., S. Soren, R. Jha, and N. Krishnamurthy. 2017. Multistage deep drawing with ironing of al-killed AISI 1040 graded medium carbon steel: A parametric study. Materials Research 20 (4):1111–20. doi:10.1590/1980-5373-mr-2016-0586.
   Web of Science ®Google Scholar
• Prabhakar, A., M. Haneef, and R. M. Shabbir Ahmed. 2013. Sheet metal forming analyses with spring back deformation on U-Bends in Isotropic plates. International Journal of Innovative Research in Science, Engineering and Engineering and Technology 2:1–19.
   Google Scholar
• Priyadarshi, D, and R. K. Sharma. 2016. Effect of type and percentage of reinforcement for optimization of the cutting force in turning of Aluminium matrix nanocomposites using response surface methodologies. Journal of Mechanical Science and Technology 30 (3):1095–101. doi:10.1007/s12206-016-0255-x.
   Web of Science ®Google Scholar
• Radhika, N, and R. Raghu. 2015. Dry sliding wear behaviour of aluminium Al–Si-12Cu/TiB2 metal matrix composite using response surface methodology. Tribology Letters. 59 (1):2–10.
   Web of Science ®Google Scholar
• Radhika, N, and R. Raghu. 2018a. Prediction of mechanical properties and modeling on sliding wear behavior of LM25/TiC composite using response surface methodology. Particulate Science and Technology. 36 (1):104–11. doi:10.1080/02726351.2016.1223773.
   Web of Science ®Google Scholar
• Radhika, N, and R. Raghu. 2018b. Study on three-body abrasive wear behaviour of functionally graded Al/TiB2 composite using response surface methodology. Particulate Science and Technology. 36 (7):816–23. doi:10.1080/02726351.2017.1305024.
   Web of Science ®Google Scholar
• Ramezani, M, and Z. M. Ripin. 2012. Analysis of deep drawing of sheet metal using the Marform process. The International Journal of Advanced Manufacturing Technology 59 (5-8):491–505. doi:10.1007/s00170-011-3513-1.
   Web of Science ®Google Scholar
• Ramirez, F., R. Domingo, M. Packianather, and M. Sebastian. 2014. Enhancing multistage deep-drawing and ironing manufacturing processes of axisymmetric components: Analysis and experimentation. Int. J. Manuf. Eng 2014:1–12. doi:10.1155/2014/596128.
   Google Scholar
• Rouyendegh, B. D, and S. Erol. 2012. Selecting the best project using the fuzzy ELECTRE method. Mathematical Problems in Engineering. 2012:790142. doi:10.1155/2012/790142.
   Web of Science ®Google Scholar
• Ruan, F., L. Xu, and B. Wang. 2009. Study on key problems in multi-stage deep drawing numerical simulation of Ultra-thin sheet Int. Conf. on Computer Modeling and Simulation.
   Google Scholar
• Saaty, T. L. 1980. Analytic hierarchy process. , New York: McGraw Hill Publications.
   Google Scholar
• Sanayei, A., S. F. Mousavi, and A. Yazdankhah. 2010. Group decision making process for supplier selection with VIKOR under fuzzy environment. Expert Systems with Applications 37 (1):24–30. doi:10.1016/j.eswa.2009.04.063.
   Web of Science ®Google Scholar
• Shankar, R., K. R. Balasubramanian, S. P. Sivapirakasam, and K. Ravikumar. 2021. Materials Today: Proceedings ANN and RSM models approach for optimization of HVOF coating. Materials Today Proceedings 46:9201–6. doi:10.1016/j.matpr.2020.01.211.
   Google Scholar
• Sharan, K. N, and A. K. Sharma. 2005. Multistage process optimization for manufacturing automotive component using finite element methods. Society of Automobile Engineering 2005:26–332.
   Google Scholar
• Shim, H. B, and K. C. Son. 2001. Optimal blank design for the drawings of arbitrary shapes by the sensitivity method. Journal of Engineering Materials and Technology 123 (4):468–75. doi:10.1115/1.1398082.
   Web of Science ®Google Scholar
• Sun, H., Z. Gao, and J. Wu. 2008. A bi-level programming model and solution algorithm for the location of logistics distribution centers. Applied Mathematical Modelling 32 (4):610–6. doi:10.1016/j.apm.2007.02.007.
   Web of Science ®Google Scholar
• Sundar Singh Sivam, S. P., R. Rajendran, and N. Harshavardhana. 2021. An investigation of stored energy in uniaxial and biaxial directional rolling on mechanical properties and microstructure of pure copper. Mechanics Based Design of Structures and Machines :1–13. doi:10.1080/15397734.2021.1909484.
   Web of Science ®Google Scholar
• Suresha, S, and B. K. Sridhara. 2010. Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates. Composites Science and Technology. 70 (11):1652–9. doi:10.1016/j.compscitech.2010.06.013.
   Web of Science ®Google Scholar
• Takalkar, A. S, and L. M. C. Babu. 2019. A review on the effect of thinning, wrinkling, and spring-back on deep drawing process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233 (4):1011–36. doi:10.1177/0954405417752509.
   Web of Science ®Google Scholar
• Thirumalai, k., V. Balasubramanian, S. Sree, and S. Vignesh. 2017. Comparison of Artificial Neural Networks (ANN) and Response Surface Methodology (RSM) Modeling Approaches in Predicting the Deposition Efficiency of Plasma Sprayed Alumina Coatings on AZ31B Magnesium Alloy. Journal of Advanced Microscopy Research 12:1–10. doi:10.1166/jamr.2017.1317.
   Google Scholar
• Thrimurthulu, K., P. M. Pandey, and N. V. Reddy. 2004. Optimum part deposition orientation in fused deposition modeling. International Journal of Machine Tools and Manufacture. 44/ (6):585–94. doi:10.1016/j.ijmachtools.2003.12.004.
   Web of Science ®Google Scholar
• Van Thai, V, and D. Grewal. 2005. Selecting the location of distribution centre in logistics operations: A conceptual framework and case study. Asia Pacific Journal of Marketing and Logistics 17 (3):3–24. doi:10.1108/13555850510672359.
   Google Scholar
• Varol, T., A. Canakci, S. Ozsahin, F. Erdemir, and S. Ozkaya. 2017. Artificial Neural Network-Based Prediction Technique for Coating Thickness in Fe-Al Coatings Fabricated by Mechanical Milling. Particulate Science and Technology. 38:742–50.
   Google Scholar
• Wang, Q., J. S. Duanmu, and L. Xu. 2009. Selection of distribution center’s location based on particle swarm optimization in military logistics. Computer Engineering and Design 30 (15):3597–9.
   Google Scholar
• Wang, C. C., T. W. Lin, and S. S. Hu. 2007. optimizing the rapid prototyping process by integrating the Taguchi method with the gray relational analysis. Rapid Prototyping Journal 13/ (5):304–15. doi:10.1108/13552540710824814.
   Web of Science ®Google Scholar
• Yazdi, M. R. S., A. M. Khorasani, and M. Faraji. 2011. Optimization of coating variables for hardness of industrial tools by using artificial neural networks. Expert Systems with Applications. 38 (10):12116–27. doi:10.1016/j.eswa.2011.03.002.
   Web of Science ®Google Scholar
• Yılmaz, İ., E. Arslan, E. Ç. Kızıltaş, and K. Çavdar. 2020. Development of a prediction method of Rayleigh damping coefficients for free layer damping coatings through machine learning algorithms. International Journal of Mechanical Sciences 166:105237. doi:10.1016/j.ijmecsci.2019.105237.
   Web of Science ®Google Scholar
• Yücel, M. G, and A. Görener. March 2016. Decision Making for Company Acquisition by ELECTRE Method. International Journal of Supply Chain Management 5 (1):75–83.
   Google Scholar
• Yücel, M, and A. Ulutaş. 2009. Çok Kriterli Karar Yöntemlerinden ELECTRE Yöntemiyle Malatya’da bir Kargo Firması için Yer Seçimi. Sosyal ve Ekonomik Araştırmalar Dergisi 9(17):327–44.
   Google Scholar
• Zein, H., M. El Sherbiny, M. Abd-Rabou, and M. El shazly. 2014. Thinning and spring back prediction of sheet metal in the deep drawing process. Materials & Design 53:797–808. doi:10.1016/j.matdes.2013.07.078.
   Web of Science ®Google Scholar
• Zeng, Q., C. Li, and X. Wu. 2016. Location selection of multiple logistics distribution center based on particle swarm optimization. In Intelligent Computing Theories and Application.
   Google Scholar
• Zhang, Y, and K. Chou. 2008. A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part B 222 (8):959–68. doi:10.1243/09544054JEM990.
   Web of Science ®Google Scholar
• Zhang, M., H. Pang, S. Zhang, and R. Meng. 2013. Selection of location for book distribution center based on genetic algorithm. Journal of Convergence Information Technology 8 (7):22–9.
   Google Scholar