Experimental study of new solar air heater design

References

• Ahmad, A., J. S. Saini, and H. K. Varma. 1996. Thermohydraulic performance of packed-bed solar air heaters. Energy Conversion and Management 37:205–214.
   Web of Science ®Google Scholar
• Akpinar, E. K. and F. Koçyiğit. 2010. Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates. Applied Energy 87:3438–50.
   Web of Science ®Google Scholar
• Alta, D., E. Bilgili, C. Ertekin, and O. Yaldiz. 2010. Experimental investigation of three different solar air heaters: Energy and exergy analyses. Applied Energy 87:2953–73.
   Web of Science ®Google Scholar
• Aoues, K., N. Moummi, M. Zellouf, and A. Benchabane. 2011. Thermal performance improvement of solar air flat plate collector: A theoretical analysis and an experimental study in Biskra, Algeria. International Journal of Ambient Energy 32:95–102.
   Google Scholar
• Cheng, K. C. and M. Akiyama. 1970. Laminar forced convection heat transfer in curved rectangular channels. International Journal of Heat and Mass Transfer 13:471–90.
   Web of Science ®Google Scholar
• Close, D. J. 1963. Solar air heaters for low and moderate temperature applications. Solar Energy 7:117–24.
   Web of Science ®Google Scholar
• Cortés, A. and R. Piacentini. 1990. Improvement of the efficiency of a bare solar collector by means of turbulence promoters. Applied Energy 36:253–61.
   Web of Science ®Google Scholar
• Duffie, J. A. and W. A. Beckman. 1991. Solar Engineering of Thermal Processes. 2nd ed. New York: John Wiley & Sons.
   Google Scholar
• Eicker, U. 2003. Solar Technologies for Buildings. Chichester: John Wiley & Sons.
   Google Scholar
• El-Sebaii, A. A., S. Aboul-Enein, M. R. I. Ramadan, S. M. Shalaby, and B. M. Moharram. 2011. Investigation of thermal performance of -double pass- flat and v-corrugated plate solar air heaters. Energy 36:1076–86.
   Web of Science ®Google Scholar
• Garg, H. P. and R. S. Adhikari. 1999. Performance evaluation of a single solar air heater with N-subcollectors connected in different combinations. International Journal of Energy Research 23:403–414.
   Web of Science ®Google Scholar
• Gill, R. S., S. Singh, and P. P. Singh. 2012. Low cost solar air heater. Energy Conversion and Management 57:131–42.
   Web of Science ®Google Scholar
• Gupta, D., S. C. Solanki, and J. S. Saini. 1997. Thermo-hydraulic performance of solar air heaters with roughened absorber plates. Solar Energy 61:33–42.
   Web of Science ®Google Scholar
• Hachemi, A. 1999. Theoretical and experimental study of efficiency factor, heat transfer and thermal heat loss coefficients in solar air collectors with selective and non selective absorbers. International Journal of Energy Research 23:675–82.
   Web of Science ®Google Scholar
• Kalogirou, S. A. 2004. Solar thermal collectors and applications. Progress in Energy and Combustion Science 30:231–95.
   Web of Science ®Google Scholar
• Karim, M. A. and M. N. A. Hawlader. 2006. Performance investigation of flat plate, v-corrugated and finned air collectors. Energy 31:452–70.
   Web of Science ®Google Scholar
• Karwa R. and G. Chitoshiya. 2013. Performance study of solar air heater having v-down discrete ribs on absorber plate. Energy 55:939–55.
   Web of Science ®Google Scholar
• Kumar, A., R. P. Saini, and J. S. Saini. 2012. Heat and fluid flow characteristics of roughened solar air heater ducts – A review. Renewable Energy 47:77–94.
   Web of Science ®Google Scholar
• Labed, A., N. Moummi, A. Benchabane, K. Aoues, and A. Moummi. 2012. Performance investigation of single- and double-pass solar air heaters through the use of various fin geometries. International Journal of Sustainable Energy 31:423–34.
   Google Scholar
• Languri, E. M., H. Taherian, K. Hooman, and J. Reisel. 2011. Enhanced double-pass solar air heater with and without porous medium. International Journal of Green Energy 8:643–54.
   Web of Science ®Google Scholar
• Lewis, M. J. 1975. Optimising the thermo-hydraulic performance of rough surfaces. International Journal of Heat and Mass Transfer 18:1243–48.
   Web of Science ®Google Scholar
• Liu, T., W. Lin, W. Gao, and C. Xia. 2007a. A comparative study of the thermal performances of cross-corrugated and v-groove solar air collectors. International Journal of Green Energy 4:427–51.
   Web of Science ®Google Scholar
• Liu, T., W. Lin, W. Gao, C. Luo, M. Li, Q. Zheng, and C. Xia. 2007b. A parametric study on the thermal performance of a solar air collector with a v-groove absorber. International Journal of Green Energy 4:601–22.
   Web of Science ®Google Scholar
• Mittal, M. K. and L. Varshney. 2006. Optimal thermohydraulic performance of a wire mesh packed solar air heater. Solar Energy 80:1112–20.
   Web of Science ®Google Scholar
• Moummi, N., S. Youcef-Ali, A. Moummi, and J. Y. Desmons. 2004. Energy analysis of a solar air collector with rows of fins. Renewable Energy 29:2053–64.
   Web of Science ®Google Scholar
• Prakash, O. and A. Kumar. 2013. Historical review and recent trends in solar drying systems. International Journal of Green Energy 10:690–738.
   Web of Science ®Google Scholar
• Prasad, B. N. and J. S. Saini. 1991. Optimal thermo-hydraulic performance of artificially roughened solar air heaters. Solar Energy 47:91–96.
   Web of Science ®Google Scholar
• Silva, R. J., R. M. Valle, and M. Ziviani. 1999. Numerical hydrodynamic and thermal analysis of laminar flow in curved elliptic and rectangular ducts. International Journal of Thermal Sciences 38:585–94.
   Web of Science ®Google Scholar
• Verma, S. K. and B. N. Prasad. 2000. Investigation for the optimal thermo-hydraulic performance of artificially roughened solar air Heaters. Renewable Energy 20:19–36.
   Web of Science ®Google Scholar
• Youcef-Ali, S., N. Moummi, J. Y. Desmons, A. Abene, H. Messaoudi, and M. Le Ray. 2001. Numerical and experimental study of dryer in forced convection. International Journal of Energy Research 25: 537–53.
   Web of Science ®Google Scholar