References
- Askri, M. S., A. Jemni, and S. Nasrallah. 2009. Optimization of hydrogen storage in metal-hydride tanks. International Journal of Hydrogen Energy 34:897–904.
- Bambhaniya, K. G., G. S. Grewal, V. Shrinet, N. L. Singh, and T. P. Govindan. 2013. Synthesis of a V–Ni alloy with low temperature hydriding characteristics for hydrogen energy storage. International Journal of Green Energy 10:640–46.
- Grochala, W. and P. Edwards. 2004. Thermal decomposition of the nonınterstitial hydrides for the storage and production of hydrogen. Chemical Reviews 104: 1283–316.
- Hilali, I. 2012. On the optimum sizing of metal hydride tank filled AB2 type alloy. Journal of Renewable and Sustainable Energy 4:033121–6.
- Hilali, İ. and M. S. Söylemez. 2008. On the optimum sizing of exhaust gas-driven automotive absorption cooling systems. International Journal of Energy Research 32:655–60.
- Incropera, F. P. 2007. Fundamentals of heat and mass transfer. 6th ed. New York: Wiley.
- Jinsong, Z., T. S. Fisher, P. Veeraraghavan Ramachandran, J. P. Gore, and I. Mudawar. 2005. A review of heat transfer ıssues in hydrogen storage technologies. Journal of Heat Transfer 127: 1391–99.
- Kalogirou, S. A. 2009. Solar energy engineering. New York: Elsevier.
- Krokos, A., D. Nikolic, E. S. Kikkinides, M. C. Georgiadis, and A. K. Stubos. 2009. Modeling and optimization of multi-tubular metal hydride beds for efficient hydrogen storage. International Journal of Hydrogen Energy 34:9128–40.
- Lachance, P. and P. Bénard. 2007. Specific surface effects on the storage of hydrogen on carbon nanostructures. International Journal of Green Energy 4:377–84.
- Macdonald, B. D. and A. M. Rowe. 2007. Experimental and numerical analysis of dynamic metal hydride hydrogen storage systems. Journal of Power Sources 174:282–93.
- Mazumdar, S., M. R. Gopal, and S. Bhattacharyya. 2005. Thermodynamic analysis and optimization of compressor-driven metal hydride cooling systems. International Journal of Hydrogen Energy 30:631–41.
- Paya, M. L., R. Mertz, and J. M. Corbera. 2011. Analysis and optimization of a metal hydride cooling system. International Journal of Hydrogen Energy 36:920–30.
- Raju, M. and S. Kuma. 2012. Optimization of heat exchanger designs in metal hydride based hydrogen storage systems. International Journal of Hydrogen Energy 37: 2767–78.
- Ranjbar, A., Z. P. Guo, X. B. Yu, A. Calka, and H. K. Liu. 2009. Hydrogen storage properties of Mg-BCC composite. International Journal of Green Energy 6:607–15.
- Sakintunaa, B., D. Lamari, and M. Hirscher. 2007. Metal hydride materials for solid hydrogen storage: A review. International Journal of Hydrogen Energy 9:1121–40.
- Sandrock, G. 1999. A panoramic overview of hydrogen storage alloys from a gas reaction point of view. Journal of Alloys and Compounds 293–295:877–88.
- Söylemez, M. S. 2000. On the optimum heat exchanger sizing for heat recovery. Energy Conversion and Management 41:1419–27.
- Söylemez, M. S. 2006. Optimum heat pump in drying systems with waste heat recovery. Journal of Food Engineering 74:292–98.
- Söylemez, M. S. 2008. Optimum length of finned pipe for waste heat recovery. Energy Conversion and Management 49:96–100.
- Usman, M. R. and D. L. Cresswell. 2013. Options for on-board use of hydrogen based on the methylcyclohexane–toluene–hydrogen system. International Journal of Green Energy 10:177–89.
- Züttel, A. 2007. Hydrogen storage and distribution systems. Mitigation and Adaptation Strategies for Global Change 12: 343–65.
![Supercharge Your Next Research Paper: Research and write your next paper with Jenni AI.]({"type":"image" , "src" : "/sda/112445/Skyscraper-econ.png"})