132
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Inefficiencies analysis of a point-focus CPV∕T system

, &

References

  • Adhikary, D. D., G. K. Bose, D. Bose, and S. Mitra. 2014. Multi criteria FMECA for coal-fired thermal power plants using COPRAS-G. International Journal of Quality & Reliability Management 31:601–14.
  • Aprea, C., and C. Renno. 2002. A numerical approach to a very fast thermal transient in an air cooling evaporator. Applied Thermal Engineering 22:219–28.
  • Aprea, C., and C. Renno. 2004. An experimental analysis of a thermodynamic model of a vapour compression refrigeration plant on varying the compressor speed. International Journal of Energy Research 28:537–49.
  • Aprea, C., and C. Renno. 2009. Experimental model of a variable capacity compressor. International Journal of Energy Research 33:29–37.
  • Bayod-Rùjula, A. A., A. M. Lorente-Lafuente, and F. Cirez-Oto. 2011. Environmental assessment of grid connected photovoltaic plants with 2-axis tracking versus fixed modules systems. Energy 36:3148–58.
  • Ben-Daya, M., and A. Raouf. 1996. A revised failure mode and effects analysis model. International Journal of Quality & Reliability Management 13:43–47.
  • Brogen, M. 2004. Optical efficiency of low-concentrating solar energy systems with parabolic reflectors. Ph.D. Thesis, Acta Universitatis Upsaliensis, Uppsala, Sweden.
  • Carmignani, G. 2009. An integrated structural framework to cost-based FMECA: The priority-cost FMECA. Reliability Engineering & System Safety 94:861–71.
  • Cotal, H., C. Fetzer, J. Boisvert, G. Kinsey, R. King, P. Hebert, H. Yoon, and N. Karam. 2009. III--V multijunction solar cells for concentrating photovoltaics. Energy & Environmental Science 2:174–92.
  • Desiato, F., F. Lena, F. Baffo, B. Suatoni, and A. Toreti. 2005. APAT (Agenzia per la Protezione dell’Ambiente e per i servizi Tecnici). Indicatori del clima in Italia elaborati attraverso il sistema 750 SCIA. Rome, Italy.
  • Eicker, U., and D. Pietruschka. 2009. Design and performance of solar powered absorption cooling systems in office buildings. Energy and Buildings 41:81–91.
  • Hang, Y., L. Du, M. Qu, and S. Peeta. 2013. Multi-objective optimization of integrated solar absorption cooling and heating systems for medium-sized office buildings. Renewable Energy 52:67–78.
  • Ho, T., S. Mao, and R. Greif. 2011. The impact of cooling on cell temperature and the practical solar concentration limits for photovoltaics. International Journal of Energy Research 35:1250–57.
  • Kribus, A., D. Kaftori, G. Mittelman, A. Hirshfeld, Y. Flitsanov, and A. Dayan. 2006. A miniature concentrating photovoltaic and thermal system. Energy Conversion and Management 47:3582–90.
  • Li, M., G. L. Li, X. Ji, F. Yin, and L. Xua. 2011. The performance analysis of the trough concentrating solar photovoltaic∕thermal system. Energy Conversion and Management 52:2378–83.
  • Lin, S. I. E. 2013. A parametric study of the packaging of concentrator photovoltaic modules. International Journal of Green Energy 10:1072–85.
  • Luque, A., G. Sala, and J. C. Arboiro. 1998. Electric and thermal model for non-uniformly illuminated concentration cells. Solar Energy Materials and Solar Cells 51:269–90.
  • Mani, M., and R. Pillai. 2010. Impact of dust on solar photovoltaic (PV) performance: Research status, challenges and recommendations. Renewable and Sustainable Energy Reviews 14:3124–31.
  • Mastrullo, R., and C. Renno. 2010. A thermoeconomic model of a photovoltaic heat pump. Applied Thermal Engineering 30:1959–66.
  • MIL-STD-1629. 1979. Procedures for performing a failure mode, effects and criticality analysis. Washington, DC: Department of Defense.
  • Mokri, A., and M. Emziane. 2011. Concentrator photovoltaic technologies and market: A critical review. World Renewable Energy Congress, Linkoping, Sweden.
  • Nishimura, A., Y. Hayashi, K. Tanaka, M. Hirota, S. Kato, M. Ito, K. Araki, and E. J. Hu. 2010. Life cycle assessment and evaluation of energy payback time on high-concentration photovoltaic power generation system. Applied Energy 87:2797–807.
  • Notton, G., and S. Diaf. 2015. Available solar energy for flat-plate solar collectors mounted on a fixed or tracking structure. International Journal of Green Energy.
  • Renno, C. 2014. Optimization of a concentrating photovoltaic thermal (CPV∕T) system used for a domestic application. Applied Thermal Engineering 67:396–408.
  • Renno, C., and M. De Giacomo. 2014. Dynamic simulation of a CPV∕T system using the finite element method. Energies 7:7395–414.
  • Renno, C., and F. Petito. 2013. Design and modeling of a concentrating photovoltaic thermal (CPV∕T) system for a domestic application. Energy and Buildings 62:392–402.
  • Renno, C., and F. Petito. 2015. Choice model for a modular configuration of a point-focus CPV∕T system. Energy and Buildings 92:55–66.
  • Sherif, R., R. R. King, H. L. Cotal, D. C. Law, C. M. Fetzer, K. Edmondson, G. S. Glenn, G. Kinsey, D. Krut, and N. H. Karam. 2006. Concentrator triple-junction solar cells and receivers in point focus and dense array modules. 21st European PV Conference, Dresden.
  • Steiner, M. A., J. F. Geisz, D. J. Friedman, W. J. Olavarria, A. Duda, and T. E. Moriarty. 2011. Temperature-dependent measurements of an inverted metamorphic multijunction (IMM) solar cell. 37th IEEE Photovoltaic Specialists Conference, Seattle, USA.
  • Zahedi, A. 2011. Review of modelling details in relation to low-concentration solar concentrating photovoltaic. Renewable and Sustainable Energy Reviews 15:1609–14.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.