References
- Anand, K., R.P. Sharma, and P.S. Mehta. 2011. Experimental investigations on combustion, performance and emissions characteristics of neat karanji biodiesel and its methanol blend in a diesel engine. Biomass & Bioenergy 35:533–541.
- Benajes, J., S. Molina, A. García, and J. Monsalve-Serrano. 2015. Effects of direct injection timing and blending ratio on RCCI combustion with different low reactivity fuels. Energy Conversion and Management 99:193–209.
- Canakci, M., C. Sayin, and M. Gumus. 2008. Exhaust emissions and combustion characteristics of a direct injection (DI) diesel engine fueled with methanol-diesel fuel blends at different injection timings. Energy Fuels 22(6):3709–3723.
- Cheung, C.S., R.J. Zhu, and Z.H. Huang 2011. Investigation on the gaseous and particulate emissions of a compression ignition engine fueled with diesel-dimethyl carbonate blends. Science of The Total Environment 409(3):523–529.
- Diezemann, M., H. Puschmann, S. Müller, and M. Brauer. 2014. Diesel RME ethanol fuel for diesel engines. MTZ Worldwide 75(4):4–11.
- Finesso, R., and E. Spessa. 2014. A real time zero-dimensional diagnostic model for the calculation of in-cylinder temperatures, HRR and nitrogen oxides in diesel engines. Energy Conversion and Management 79:498–510.
- Ghojel, J., and D. Honnery. 2005. Heat release model for the combustion of diesel oil emulsions in DI diesel engines. Applied Thermal Engineering 25:2072–2085.
- Gong, C., K. Huang, Y. Chen, J. Jia, Y. Su, and X. Liu. 2011. Cycle-by-cycle combustion variation in a DISI engine fueled with methanol. Fuel 90(8):2817–2819.
- Gong, Y.f., S.H. Liu, H.J. Guo, T.G. Hu, and L.B. Zhou. 2007. A new diesel oxygenate additive and its effects on engine combustion and emissions. Applied Thermal Engineering 27:202–207.
- Granet, V., O. Vermorel, and C. Lacour. 2012. Large-eddy simulation and experimental study of cycle-to-cycle variations of stable and unstable operating points in a spark ignition engine. Combustion and Flame 159(4):1562–1575.
- Gumus, M. 2010. A comprehensive experimental investigation of combustion and heat release characteristics of a biodiesel (hazelnut kernel oil methyl ester) fueled direct injection compression ignition engine. Fuel 89(10):2802–2814.
- Guo, H.S., V. Hosseini, W.S. Neill, W.L. Chippior, and C.E. Dumitrescu. 2011. An experimental study on the effect of hydrogen enrichment on diesel fueled HCCI combustion. Hydrogen Energy 36:13820–13830.
- Imtenan, S., H.H. Masjuki, and M. Varman 2015. Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Conversion and Management 94:84–94.
- Jung, D., and N. Iida. 2015. Closed-loop control of HCCI combustion for DME using external EGR and rebreathed EGR to reduce pressure-rise rate with combustion-phasing retard. Applied Energy 138:315–330.
- Kalghatgi, G.T., L. Hildingsson, A.J. Harrison, and B. Johansson. 2011. Autoignition quality of gasoline fuels in partially premixed combustion in diesel engines. Proceedings of the Combustion Institute 33(2):3015–3021.
- Kouremenos, D.A., C.D. Rakopoulos, and K.G. Kostos. 1992. Stochastic-experimental investigation of the cyclic pressure variation in a DI single-cylinder diesel engine. International Journal of Energy Research 16(9):865–877.
- Li, X.L., H.Y. Chen, Z.Y. Zhu, and Z. Huang. 2006. Study of combustion and emission characteristics of a diesel engine operated with dimethyl carbonate. Energy Conversion and Management 47(11–12):1438–1448.
- Mancaruso, E., and B.M. Vaglieco. 2015. Spectroscopic analysis of the phases of premixed combustion in a compression ignition engine fuelled with diesel and ethanol. Applied Energy 143:164–175.
- Maurya, R.K., and A.K. Agarwal. 2011. Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters. Applied Energy 88(4):1153–1163.
- Maurya, R.K., and A.K. Agarwal. 2012. Statistical analysis of the cyclic variations of heat release parameters in HCCI combustion of methanol and gasoline. Applied Energy 89(1):228–236.
- Mobasheri, R., Z.J. Peng, and S.M. Mirsalim. 2012. Analysis the effect of advanced injection strategies on engine performance and pollutant emissions in a heavy duty DI-diesel engine by CFD modeling. International Journal of Heat and Fluid Flow 33:59–69.
- Murayama, T., M. Zheng, T. Chikahisa, Y.T. Oh, Y. Fujiwara, S. Tosaka, M. Yamashita, and H. Yoshitake. 1995. Simultaneous reductions of smoke and NOx from a DI diesel engine with EGR and dimethyl carbonate. SAE Paper 952518.
- Nguyen, K.B., T. Dan, and I. Asano. 2015. Effect of double injection on combustion, performance and emissions of Jatropha water emulsion fueled direct-injection diesel engine. Energy 80:746–755.
- Öztürk, E. 2015. Performance, emissions, combustion and injection characteristics of a diesel engine fuelled with canola oil-hazelnut soapstock biodiesel mixture. Fuel Processing Technology 129:183–191.
- Patil, K.R., and S.S. Thipse. 2015. Experimental investigation of CI engine combustion, performance and emissions in DEE-kerosene-diesel blends of high DEE concentration. Energy Conversion and Management 89:396–408.
- Puschmann, H., M. Diezemann, and S. Mueller. 2013. Influence of innovative diesel-ethanol blend on combustion, emission and fuel-carrying components. SAE Technical Paper 2013–01–2696.
- Rounce, P., A. Tsolakis, P. Leung, and A.P.E. York. 2010. A comparison of diesel and biodiesel emissions using dimethyl carbonate as an oxygenated additive. Energy Fuels 24:4812–4819.
- Stölting, E., J. Seebode, R. Gratzke, and K. Behnk. 2008. Emission-based engine management for heavy-duty applications. MTZ Worldwide 69(12):30–35.
- Torregrosa, A.J., A. Broatch, A. García, and L.F. Mónico. 2013. Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI Diesel engines. Applied Energy 104:149–157.
- Tsolakis, A, M.L. Megaritis, and W.K. Theinnoi. 2007. Engine performance and emissions of a diesel engine operating on diesel-RME (rapeseed methyl ester) blends with EGR (exhaust gas recirculation). Energy 32:2072–2080.
- Tutak, W., K. Lukacs, S. Szwaja, and A. Bereczky. 2015. Alcohol-diesel fuel combustion in the compression ignition engine. Fuel 154:196–206.
- Zhao, Y.W., Y. Wang, D.C. Li, X. Lei, and S.H. Liu. 2014. Combustion and emission characteristics of a DME (dimethyl ether)-diesel dual fuel premixed charge compression ignition engine with EGR (exhaust gas recirculation). Energy 72:608–617.
- Zheng, M., X.Y. Han, U. Asad, and J.X. Wang. 2015. Investigation of butanol-fuelled HCCI combustion on a high efficiency diesel engine. Energy Conversion and Management 98:215–224.
- Zhuang, J., X.Q. Qiao, J.L. Bai, and Z. Hu. 2014. Effect of diesel from direct coal liquefaction-biodiesel blends on combustion, performance and emission characteristics of a turbocharged DI diesel engine. Fuel Processing Technology 123:82–91.