References
- Chen, J.-S. and J.-H. Chou. (2014). Cooling performance of flat plate heat pipes with different liquid filling ratios. International Journal of Heat and Mass Transfer, 77:874–82.
- Chien, K.-H., Y.-T. Lin, Y.-R. Chen, K.-S. Yang, and C.-C. Wang. (2012). A novel design of pulsating heat pipe with fewer turns applicable to all orientations. International Journal of Heat and Mass Transfer 55:5722–8.
- Hartnett, J. P. and M. Kostic. (1989). Heat Transfer to Newtonian and Non-Newtonian Fluids in Rectangular ducts. Advances in Heat Transfer 19:247–356.
- Liou, J.-H., C.-W. Chang, C. Chao, and S.-C. Wong. (2010). Visualization and thermal resistance measurement for the sintered mesh-wick evaporator in operating flat-plate heat pipes. International Journal of Heat and Mass Transfer 53:1498–1506.
- Li, J., J. Zhao, and S. Wang. (2015). Gas–liquid two-phase flow in a mini-channel with water infiltration continuously along the flow direction. International Journal of Green Energy 12:207–14.
- Lips, S., F. Lefèvre and J. Bonjour. (2010). Combined effects of the filling ratio and the vapour space thickness on the performance of a flat plate heat pipe. International Journal of Heat and Mass Transfer 53:694–702.
- Moffat, R.-J. (1988). Describing the uncertainties in experimental results. Experimental Thermal and Fluid Science 1:3–17.
- Naphon, P., S. Wongwises, S. Wiriyasart. (2012). On the thermal cooling of central processing unit of the PCs with vapor chamber. International Communications in Heat and Mass Transfer 39:1165–68.
- Naphon P., S.Wongwises, S.Wiriyasart. (2013). Application of two-phase vapor chamber technique for hard disk drive cooling of PCs. International Communications in Heat and Mass Transfer 40:32–5.
- Tseng C.-Y., K.-S. Yang, K.-H. Chien, M.-S. Jeng, and C.-C. Wang. (2014). Investigation of the performance of pulsating heat pipe subject to uniform/alternating tube diameters. Experimental Thermal and Fluid Science 54:85–92.
- Wong, S.-C. and C.-W. Chen. (2013). Visualization experiments for groove-wicked flat-plate heat pipes with various working fluids and powder-groove evaporator. International Journal of Heat and Mass Transfer 66:396–403.
- Wang, S., J. Chen, Y. Hu, and W. Zhang. (2011). Effect of evaporation section and condensation section length on thermal performance of flat plate heat pipe. Applied Thermal Engineering 31:2367–73.
- Wang, J.-C., R.-T. Wang, T.-L. Chang, D.-S. Hwang. (2010). Development of 30 Watt high-power LEDs vapor chamber-based plate. International Journal of Heat and Mass Transfer 53:3990–4001.
- Wang, J.-C. (2014). Thermal module design and analysis of a 230 W LED illumination lamp under three incline angles. Microelectronics Journal 45:416–23.
- Yu, X, S. Tung, Z. Wang, H. Huang. (2008). Investigation on Methanol Steam Reforming in a Microchannel Reactor by Experiments and Mathematical Model Analysis. International Journal of Green Energy 5:281–96.
- Yang, K.-S., C.-C. Lin, J.-C. Shyu, C.-Y. Tseng, and C.-C. Wang. (2014). Performance and two-phase flow pattern for micro flat heat pipes. International Journal of Heat and Mass Transfer 77:1115–23.
![Supercharge Your Next Research Paper: Research and write your next paper with Jenni AI.]({"type":"image" , "src" : "/sda/112445/Skyscraper-econ.png"})