Effect of square wing with combined solid ring twisted tape inserts on heat transfer and fluid flow of a circular tube heat exchanger

References

• Abdolbaqi, M. K., W. H. Azmi, R. Mamat, N. M. Z. N. Mohamed, and G. Najafi. 2016. Experimental investigation of turbulent heat transfer by counter and co-swirling flow in a flat tube fitted with twin twisted tapes. International Communications in Heat and Mass Transfer 75 (SupplementC):295–302. doi:10.1016/j.icheatmasstransfer.2016.04.021.
   Google Scholar
• Akhavan-Behabadi, M. A., R. Kumar, M. R. Salimpour, and R. Azimi. 2010. Pressure drop and heat transfer augmentation due to coiled wire inserts during laminar flow of oil inside a horizontal tube. International Journal of Thermal Sciences 49 (2):373–79. doi:10.1016/j.ijthermalsci.2009.06.004.
   Web of Science ®Google Scholar
• Ananth, J., and S. Jaisankar. 2014. Investigation on heat transfer and friction factor characteristics of thermosiphon solar water heating system with left-right twist regularly spaced with rod and spacer. Energy 65 (SupplementC):357–63. doi:10.1016/j.energy.2013.12.001.
   Google Scholar
• Bas, H., and V. Ozceyhan. 2012. Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall. Experimental Thermal and Fluid Science 41:51–58. doi:10.1016/j.expthermflusci.2012.03.008.
   Web of Science ®Google Scholar
• Durga Prasad, P. V., and A. V. S. S. K. S. Gupta. 2016. Experimental investigation on enhancement of heat transfer using Al2O3/water nanofluid in a u-tube with twisted tape inserts. International Communications in Heat and Mass Transfer 75 (SupplementC):154–61. doi:10.1016/j.icheatmasstransfer.2016.03.019.
   Google Scholar
• Eiamsa-Ard, S., C. Thianpong, P. Eiamsa-Ard, and P. Promvonge. 2010. Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem. International Communications in Heat and Mass Transfer 37 (1):39–46. doi:10.1016/j.icheatmasstransfer.2009.08.010.
   Web of Science ®Google Scholar
• Eiamsa-Ard, S., and P. Promvonge. 2010. Thermal characteristics in round tube fitted with serrated twisted tape. Applied Thermal Engineering 30 (13):1673–82. doi:10.1016/j.applthermaleng.2010.03.026.
   Web of Science ®Google Scholar
• Eiamsa-Ard, S., and P. Promvonge. 2011. Influence of double-sided delta-wing tape insert with alternate-axes on flow and heat transfer characteristics in a heat exchanger tube. Chinese Journal of Chemical Engineering 19 (3):410–23. doi:10.1016/S1004-9541(11)60001-3.
   Web of Science ®Google Scholar
• Eiamsa-Ard, S., and P. Seemawute. 2012. Decaying swirl flow in round tubes with short-length twisted tapes. International Communications in Heat and Mass Transfer 39 (5):649–56. doi:10.1016/j.icheatmasstransfer.2012.03.021.
   Web of Science ®Google Scholar
• Eiamsa-Ard, S., V. Kongkaitpaiboon, and K. Nanan. 2013. Thermohydraulics of turbulent flow through heat exchanger tubes fitted with circular-rings and twisted tapes. Chinese Journal of Chemical Engineering 21 (6):585–93. doi:10.1016/S1004-9541(13)60504-2.
   Web of Science ®Google Scholar
• Guo, J., M. Xu, and L. Cheng. 2010. Numerical investigations of circular tube fitted with helical screw-tape inserts from the viewpoint of field synergy principle. Chemical Engineering and Processing: Process Intensification 49 (4):410–17. doi:10.1016/j.cep.2010.02.011.
   Web of Science ®Google Scholar
• Holman, J. P. 2004. Experimental methods for engineers. New Delhi: Tata McGraw-Hill.
   Google Scholar
• Hosseini, S. S., M. Farhadi, and K. Sedighi. 2017. Experimental investigation of a solar desalination system using twisted tape and wire coil inside of spiral heat exchanger. Desalination 420 (SupplementC):34–44. doi:10.1016/j.desal.2017.06.004.
   Google Scholar
• Ibrahim, E. Z. 2011. Augmentation of laminar flow and heat transfer in flat tubes by means of helical screw-tape inserts. Energy Conversion and Management 52 (1):250–57. doi:10.1016/j.enconman.2010.06.065.
   Web of Science ®Google Scholar
• Kongkaitpaiboon, V., K. Nanan, and S. Eiamsa-Ard. 2010. Experimental investigation of convective heat transfer and pressure loss in a round tube fitted with circular-ring turbulators. International Communications in Heat and Mass Transfer 37 (5):568–74. doi:10.1016/j.icheatmasstransfer.2009.12.016.
   Web of Science ®Google Scholar
• Lewis, M. J. 1975. Optimizing the thermo hydraulic performance of rough surface. International Journal of Heat Mass Transfer 18:1243–48. doi:10.1016/0017-9310(75)90232-X.
   Web of Science ®Google Scholar
• Li, P., Z. Liu, W. Liu, and G. Chen. 2015. Numerical study on heat transfer enhancement characteristics of tube inserted with centrally hollow narrow twisted tapes. International Journal of Heat and Mass Transfer 88 (SupplementC):481–91. doi:10.1016/j.ijheatmasstransfer.2015.04.103.
   Google Scholar
• Liu, P., N. Zheng, F. Shan, Z. Liu, and W. Liu. 2018. An experimental and numerical study on the laminar heat transfer and flow characteristics of a circular tube fitted with multiple conical strips inserts. International Journal of Heat and Mass Transfer 117 (SupplementC):691–709. doi:10.1016/j.ijheatmasstransfer.2017.10.035.
   Google Scholar
• Mashoofi, N., S. Pourahmad, and S. M. Pesteei. 2017. Study the effect of axially perforated twisted tapes on the thermal performance enhancement factor of a double tube heat exchanger. Case Studies in Thermal Engineering 10 (SupplementC):161–68. doi:10.1016/j.csite.2017.06.001.
   Google Scholar
• Meyer, J. P., and S. M. Abolarin. 2018. Heat transfer and pressure drop in the transitional flow regime for a smooth circular tube with twisted tape inserts and a square-edged inlet. International Journal of Heat and Mass Transfer 117 (SupplementC):11–29. doi:10.1016/j.ijheatmasstransfer.2017.09.103.
   Google Scholar
• Moghadas Zade, N., S. Akar, S. Rashidi, and J. Abolfazli Esfahani. 2017. Thermo-hydraulic analysis for a novel eccentric helical screw tape insert in a three dimensional tube. Applied Thermal Engineering 124 (SupplementC):413–21. doi:10.1016/j.applthermaleng.2017.06.036.
   Google Scholar
• Mokhtari, M., S. Hariri, M. Barzegar Gerdroodbary, and R. Yeganeh. 2017. Effect of non-uniform magnetic field on heat transfer of swirling ferrofluid flow inside tube with twisted tapes. Chemical Engineering and Processing: Process Intensification 117 (SupplementC):70–79. doi:10.1016/j.cep.2017.03.018.
   Google Scholar
• Murugesan, P., K. Mayilsamy, S. Suresh, and P. S. S. Srinivasan. 2011. Heat transfer and pressure drop characteristics in a circular tube fitted with and without V-cut twisted tape insert. International Communications in Heat and Mass Transfer 38 (3):329–34. doi:10.1016/j.icheatmasstransfer.2010.11.010.
   Web of Science ®Google Scholar
• Nanan, K., C. Thianpong, M. Pimsarn, V. Chuwattanakul, and S. Eiamsa-Ard. 2017. Flow and thermal mechanisms in a heat exchanger tube inserted with twisted cross-baffle turbulators. Applied Thermal Engineering 114 (SupplementC):130–47. doi:10.1016/j.applthermaleng.2016.11.153.
   Google Scholar
• Nanan, K., C. Thianpong, P. Promvonge, and S. Eiamsa-Ard. 2014. Investigation of heat transfer enhancement by perforated helical twisted-tapes. International Communications in Heat and Mass Transfer 52 (SupplementC):106–12. doi:10.1016/j.icheatmasstransfer.2014.01.018.
   Google Scholar
• Promvonge, P. 2015. Thermal performance in square-duct heat exchanger with quadruple V-finned twisted tapes. Applied Thermal Engineering 91 (SupplementC):298–307. doi:10.1016/j.applthermaleng.2015.08.047.
   Google Scholar
• Rios-Iribe, E. Y., M. E. Cervantes-Gaxiola, E. Rubio-Castro, J. M. Ponce-Ortega, M. D. González-Llanes, C. Reyes-Moreno, and O. M. Hernández-Calderón. 2015. Heat transfer analysis of a non-Newtonian fluid flowing through a circular tube with twisted tape inserts. Applied Thermal Engineering 84 (SupplementC):225–36. doi:10.1016/j.applthermaleng.2015.03.052.
   Google Scholar
• Roy, S., and S. K. Saha. 2015. Thermal and friction characteristics of laminar flow through a circular duct having helical screw-tape with oblique teeth inserts and wire coil inserts. Experimental Thermal and Fluid Science 68 (SupplementC):733–43. doi:10.1016/j.expthermflusci.2015.07.007.
   Google Scholar
• Salam, B., S. Biswas, S. Saha, and Muhammad Mostafa K.. Bhuiya. 2013. Heat transfer enhancement in a tube using rectangular-cut twisted tape insert. Procedia Engineering 56:96–103. doi:10.1016/j.proeng.2013.03.094.
   Google Scholar
• Saysroy, A., and S. Eiamsa-Ard. 2017. Periodically fully-developed heat and fluid flow behaviors in a turbulent tube flow with square-cut twisted tape inserts. Applied Thermal Engineering 112 (SupplementC):895–910. doi:10.1016/j.applthermaleng.2016.10.154.
   Google Scholar
• Shabanian, S. R., M. Rahimi, M. Shahhosseini, and A. A. Alsairafi. 2011. CFD and experimental studies on heat transfer enhancement in an air cooler equipped with different tube inserts. International Communications in Heat and Mass Transfer 38 (3):383–90. doi:10.1016/j.icheatmasstransfer.2010.12.015.
   Web of Science ®Google Scholar
• Singh, V., S. Chamoli, M. Kumar, and A. Kumar. 2016. Heat transfer and fluid flow characteristics of heat exchanger tube with multiple twisted tapes and solid rings inserts. Chemical Engineering and Processing. Process Intensification 102:156–68. doi:10.1016/j.cep.2016.01.013.
   Web of Science ®Google Scholar
• Sivashanmugam, P., and P. K. Nagarajan. 2007. Studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with right and left helical screw-tape inserts. Experimental Thermal and Fluid Science 32 (1):192–97. doi:10.1016/j.expthermflusci.2007.03.005.
   Web of Science ®Google Scholar
• Skullong, S., P. Promvonge, N. Jayranaiwachira, and C. Thianpong. 2016. Experimental and numerical heat transfer investigation in a tubular heat exchanger with delta-wing tape inserts. Chemical Engineering and Processing: Process Intensification 109 (Supplement C):164–77. doi:10.1016/j.cep.2016.09.005.
   Google Scholar
• Song, M. S., S. H. Park, and E. S. Kim. 2016. Particle image velocimetry measurements of 2-dimensional velocity field around twisted tape. Fusion Engineering and Design 109 (PartA):596–601. doi:10.1016/j.fusengdes.2016.02.039.
   Google Scholar
• Suri, A. R., A. Kumar, and R. Maithani. 2017. Effect of square wings in multiple square perforated twisted tapes on fluid flow and heat transfer of heat exchanger tube. Case Studies in Thermal Engineering 10 (SupplementC):28–43. doi:10.1016/j.csite.2017.03.002.
   Google Scholar
• Tamna, S., Y. Kaewkohkiat, S. Skullong, and P. Promvonge. 2016. Heat transfer enhancement in tubular heat exchanger with double V-ribbed twisted-tapes. Case Studies in Thermal Engineering 7 (SupplementC):14–24. doi:10.1016/j.csite.2016.01.002.
   Google Scholar
• Thianpong, C., P. Eiamsa-Ard, P. Promvonge, and S. Eiamsa-Ard. 2012. Effect of perforated twisted-tapes with parallel wings on heat tansfer enhancement in a heat exchanger tube. Energy Procedia 14 (SupplementC):1117–23. doi:10.1016/j.egypro.2011.12.1064.
   Google Scholar
• Vashistha, C., A. K. Patil, and M. Kumar. 2016. Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts. Applied Thermal Engineering 96 (SupplementC):117–29. doi:10.1016/j.applthermaleng.2015.11.077.
   Google Scholar
• Wongcharee, K., and S. Eiamsa-Ard. 2011. Friction and heat transfer characteristics of laminar swirl flow through the round tubes inserted with alternate clockwise and counter-clockwise twisted-tapes. International Communications in Heat and Mass Transfer 38 (3):348–52. doi:10.1016/j.icheatmasstransfer.2010.12.007.
   Web of Science ®Google Scholar
• Yang, C. S., D. Z. Jeng, Y.-J. Yang, H.-R. Chen, and C. Gau. 2011. Experimental study of pre-swirl flow effect on the heat transfer process in the entry region of a convergent pipe. Experimental Thermal and Fluid Science 35 (1):73–81. doi:10.1016/j.expthermflusci.2010.08.008.
   Web of Science ®Google Scholar
• Zhang, X., Z. Liu, and W. Liu. 2013. Numerical studies on heat transfer and friction factor characteristics of a tube fitted with helical screw-tape without core-rod inserts. International Journal of Heat and Mass Transfer 60 (SupplementC):490–98. doi:10.1016/j.ijheatmasstransfer.2013.01.041.
   Google Scholar
• Zhu, J. D., and H. Chen. 2015. Numerical study on enhanced heat transfer by twisted tape inserts inside tubes. In Procedia engineering, 14th International Conference on Pressure Vessel Technology (ICPVT-14), Vol. 130, 256–62. doi: 10.1016/j.proeng.2015.12.219 130
   Google Scholar