References
- Aliabdo, A. A., A. E. M. A. Elmoaty, and H. A. Salem. 2016. Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance. Construction and Building Materials 121:694–703. doi:10.1016/j.conbuildmat.2016.06.062.
- Asbridge, A. H., C. L. Page, and M. M. Page. 2002. Effects of metakaolin, water/binder ratio and interfacial transition zones on the microhardness of cement mortars. Cement and Concrete Research 32 (9):1365–69. doi:10.1016/S0008-8846(02)00798-6.
- Baltazar, L. G., F. M. A. Henriques, F. Jorne, M. T. Cidade. 2014. Combined effect of superplasticizer, silica fume and temperature in the performance of natural hydraulic lime grouts. Construction and Building Materials 50:584–97. doi:10.1016/j.conbuildmat.2013.10.005.
- Cao, M., C. Y. Wang, R. Xia, P. Chen, J. Miao, B. Yang, J. Qian, Y. Tang. 2018. Preparation and performance of the modified high-strength/high-modulus polyvinyl alcohol fiber/polyurethane grouting materials. Construction and Building Materials 168:482–89. doi:10.1016/j.conbuildmat.2018.02.173.
- Chen, Y., W. Ye, and K. Zhang. 2009. Strength of copolymer grouting material based on orthogonal experiment. Journal of Central South University of Technology 16 (1):143–48. doi:10.1007/s11771-009-0024-4.
- Feng, G. R., P. F. Wang, and Y. P. Chugh. 2019. Stability of Gate Roads Next to an Irregular Yield Pillar: A Case Study. Rock Mechanics and Rock Engineering52(8):2741–2760.
- Feng, Z. Q., and H. P. Kang. 2010. Development and application of new waterproof grouting materials of polyurethane. Chinese Journal of Geotechnical Engineering 3 (32):375–80. (In Chinese).
- Gao, X. C., X. Y. Wang, and X. D. Liu. 2018. New chemical grouting materials and rapid construction technology for inclined shaft penetrating drift-sand layer in coal mine. Advances in Materials Science and Engineering 2018:1–5.
- Gao, Y. B., W. Yang, H. Li, et al. 2015. Property research of grouting material produced by rock cuttings. Journal of China Coal Society 40 (4):816–22. (In Chinese).
- Gustin, E. J. G., U. F. A. Karim, and H. J. H. Brouwers. 2007. Bleeding characteristics for viscous cement and cement–bentonite grouts. Geotechnique 57 (4):391–95. doi:10.1680/geot.2007.57.4.391.
- Han, W. W., S. C. Li, Q. S. Zhang. 2013. Experiment study on viscosity behavior and its temperature influence of cement silicate grouts. Applied Mechanics and Materials 256:153–56.
- Hou, C. J. 2013. Team. Ground control of road ways. Xuzhou: China University of Mining and Technology Press.
- Kang, H. P. 2013. In-situ geomechanics measurements for coal and rock masses and their application on strata control. Beijing: Science Press.
- Kazemian, S., A. Prasad, B. B. K. Huat, J. B. Bazaz, F. N. A. A. Aziz, T. A. M. Ali. 2011. Influence of cement–sodium silicate grout admixed with calcium chloride and kaolinite on sapric peat. Journal of Civil Engineering and Management 17 (3):309–18. doi:10.3846/13923730.2011.589209.
- Khayat, K. H., and A. Yahia. 1998. Simple field tests to characterize fluidity and washout resistance of structural cement grout. Cement, Concrete and Aggregates 20 (1):145–56. doi:10.1520/CCA10448J.
- Khayat, K. H., M. Saric-Coric, and F. Liotta. 2002. Influence of thixotropy on stability characteristics of cement grout and concrete. Materials Journal 99 (3):234–41.
- Kim, J. S., I. M. Lee, J. H. Jang, H. Choi. 2009. Groutability of cement‐based grout with consideration of viscosity and filtration phenomenon. International Journal for Numerical and Analytical Methods in Geomechanics 33 (16):1771–97. doi:10.1002/nag.785.
- Li, S., W. Zhao, Y. Huang, Y.-X. Lei, L.-M. Yu. 2013. Study on the characteristics of grout permeation based on cylindrical diffusion. Journal of Coal Science and Engineering (China) 19 (1):57–62. (In Chinese). doi:10.1007/s12404-013-0110-y.
- Li, X. L., F. M. Wang, Y. H. Zhong. 2015. Simulation on flowing and diffusing of expansible grouting material of polymer in two-dimensional fractures. Chinese Journal of Rock Mechanics and Engineering 34 (6):1190–97. (In Chinese).
- Liu, Q., J. Chai, S. Chen, D. Zhang, Q. Yuan, and S. Wang. 2020. Monitoring and correction of the stress in an anchor bolt based on Pulse PrePumped Brillouin Optical Time Domain Analysis. Energy Sci Eng. 2020 (10):1–13.
- Liu, Q. S., Y. S. Kang, and Y. Q. Bai. 2011. Research on supporting method for deep rock roadway with broken and soft surrounding rock in Guqiao Coal Mine. Rock and Soil Mechanics 10 (31):3097–104.
- Liu, Y., and B. Chen. 2019. Research on the preparation and properties of a novel grouting material based on magnesium phosphate cement. Construction and Building Materials 214:516–26. doi:10.1016/j.conbuildmat.2019.04.158.
- Liu, Y. W., Y. P. Cheng, and L. I. GF. 2012. Research on high performance grouting material and improving surrounding rock mass strength. Journal of Mining and Safety Engineering 29 (6):159–63. (In Chinese).
- Meng, Q. B., L. J. Han, and R. J. Shi. 2015. Study and application of construction technology for inclined shafts penetrating drift sand strata in coal mine. Chinese Journal of Geotechnical Engineering 37 (5):901–09.
- Mujah, D. 2016. Compressive strength and chloride resistance of grout containing ground palm oil fuel ash. Journal of Cleaner Production 112:712–22. doi:10.1016/j.jclepro.2015.07.066.
- Nia, A. R., G. R. Lashkaripour, and M. Ghafoori. 2017. Prediction of grout take using rock mass properties. Bulletin of Engineering Geology and the Environment 76 (4):1643–54. doi:10.1007/s10064-016-0956-5.
- Pasian, C., F. Piqué, and A. Jornet. 2017. Non-structural injection grouts with reduced water content: Changes induced by the partial substitution of water with alcohol. Studies in Conservation 62 (1):43–54. doi:10.1179/2047058415Y.0000000022.
- Shalabi, F. I. 2005. FE analysis of time-dependent behavior of tunneling in squeezing ground using two different creep models[J]. Tunnelling and Underground Space Technology 20 (3):271–279.
- Shimada, H., A. Hamanaka, T. Sasaoka, K. Matsui. 2014. Behaviour of grouting material used for floor reinforcement in underground mines. International Journal of Mining, Reclamation and Environment 28 (2):133–48.
- Shimada, H., T. S. Hamanakaa 2014. Behaviour of grouting material used for floor einforcement in underground mines. International Journal of Mining Reclamation and Environment 28 (2):133–48.
- Sonebi, M., M. Lachemi, and K. M. A. Hossain. 2013. Optimization of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture. Construction and Building Materials 38:126–38. doi:10.1016/j.conbuildmat.2012.07.102.
- Sui, W., J. Liu, W. Hu, J. Qi, K. Zhan. 2015. Experimental investigation on sealing efficiency of chemical grouting in rock fracture with flowing water. Tunnelling and Underground Space Technology 50:239–49. doi:10.1016/j.tust.2015.07.012.
- Sun, X. M., F. Chen, G. F. Liang. 2017. Experimental and application research on grouting material for preventing swelling of soft rock. Chinese Journal of Rock Mechanics and Engineering 36 (2):457–65.
- Thanoon, W. A., A. H. Alwathaf, J. Noorzaei, M. S. Jaafar, M. R. Abdulkadir. 2008. Nonlinear finite element analysis of grouted and ungrouted hollow interlocking mortarless block masonry system. Engineering Structures 30 (6):1560–72. doi:10.1016/j.engstruct.2007.10.014.
- Wang, D., and Z. Jiang. 2010. Characteristics of water inflow and chemical grouting treatment of a Liu Yuanzi coal mine shaft in the ordos basin. Mining Science and Technology 20 (4):607–10.
- Wang, H. W., Y. D. Jiang, Y. X. Zhao 2012. Application of support technology with high strength and high pretension stress for weak-broken rocks. Journal of Mining & Safety Engineering 4 (29):474–80.
- Wang, Y., and K. T. Fang. 1996. Uniform mixing design. Science China Mathematics (1):1–10. Beijing, China: Science Press. (in Chinese).
- Wu, M. Y., Q. C. Wang, R. L. ZHANG. 2016. Cementing performance and compressive strength of complex cementitions-sodium silicate two-shot grouting materials. Bulletin of the Chinese Ceramic Society 35 (9):2741–46. (In Chinese).
- Xu, M. L., X. F. He, J. F. Li. 2014. Research on application of polyurethane grouting material for mining. Materials Review 9 (28):96–100.
- Xue, Q., J. Li, and L. Liu. 2013. Experimental study on anti-seepage grout made of leachate contaminated clay in landfill. Applied Clay Science 80:438–42. doi:10.1016/j.clay.2013.06.026.
- Yihdego, Y. 2017. Hydraulic in situ testing for mining and engineering design: Packer test procedure, preparation, analysis and interpretation. Geotechnical and Geological Engineering 35 (1):29–44. doi:10.1007/s10706-016-0112-9.
- Yoon, S., and M. Abu-Farsakh. 2009. Laboratory investigation on the strength characteristics of cement-sand as base material. KSCE Journal of Civil Engineering 13 (1):15. doi:10.1007/s12205-009-0015-x.
- Yu, W., B. Pan, F. Zhang, S. Yao, F. Liu. 2019. Deformation characteristics and determination of optimum supporting time of alteration rock mass in deep mine. KSCE Journal of Civil Engineering 23 (11):4921–32. doi:10.1007/s12205-019-0365-y.
- Yu, Z., S. Yang, Y. Gu, J. Deng. 2020. Numerical approach of liquid carbon dioxide injection in crushed coal and its experimental validation. International Journal of Energy Research. doi:10.1002/er.5899.
- Zeng, Q., K. Li, T. Fen-chong, P. Dangla. 2012. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes. Construction and Building Materials 27 (1):560–69. doi:10.1016/j.conbuildmat.2011.07.007.
- Zhang, D. F., B. Z. Ju, S. F. Zhang, L. He, J.-Z. Yang. 2007. The study on the dispersing mechanism of starch sulfonate as a water-reducing agent for cement. Carbohydrate Polymers 70 (4):363–68. doi:10.1016/j.carbpol.2007.04.024.
- Zhang, J. P., L. M. L. Li, F. T. Zhang. 2018. Development and application of new composite grouting material for sealing groundwater inflow and reinforcing wall rock in deep mine. Scientific Reports 8 (1):1–11.
- Zhao, X. H., C. Y. Liu, Y. F. Liu. 2017. Experimental research on solidified mechanism of new soda residue-fly ash-based grouting materials. Bulletin of the Chinese Ceramic Society 36 (4):1417–23.