Research on low-temperature performance of plate-fin hydrogen preheater for a proton-exchange membrane fuel cell

References

• Adnan, O., S. Shahgaldi, J. Zhao, X. G. Li, and F. Hamdullahpur. 2020. Degradations in porous components of a proton exchange membrane fuel cell under freeze-thaw cycles: morphology and microstructure effects. International Journal of Hydrogen Energy 45 (529):3618–31. doi:10.1016/j.ijhydene.2018.10.209.
   Google Scholar
• Ahmadi, N., and M. Kõrgesaar. 2020. Analytical approach to investigate the effect of gas channel draft angle on the performance of PEMFC and species distribution. International Journal of Heat and Mass Transfer 152:119529. doi:10.1016/j.ijheatmasstransfer.2020.119529.
   Web of Science ®Google Scholar
• Ahmadi, N., S. Rezazadeh, A. Dadvand, and I. Mirzaee. 2018. Study of the effect of gas channels geometry on the performance of polymer electrolyte membrane fuel cell. Periodica Polytechnica Chemical Engineering 62 (1):97–105. doi:10.3311/PPch.9369.
   Web of Science ®Google Scholar
• Ahmadi, N., and S. Rostami. 2019. Enhancing the performance of polymer electrolyte membrane fuel cell by optimizing the operating parameter. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 (5):220. doi:10.1007/s40430-019-1720-0.
   Web of Science ®Google Scholar
• Amamou, A., M. Kandidayeni, L. Boulon, and S. Kelouwani. 2018. Real time adaptive efficient cold start strategy for proton exchange membrane fuel cells. International Journal of Hydrogen Energy 216:21–30. doi:10.1016/j.apenergy.2018.02.071.
   Google Scholar
• Amir, A., S. Asghari, and M. Sarraf. 2018. An investigation into the effect of manifold geometry on uniformity of temperature distribution in a PEMFC stack. Energy 145 (15):141–51. doi:10.1016/j.energy.2017.12.124.
   Google Scholar
• Ayush, G., M. Kumar, and A. K. Patil. 2019. Enhanced heat transfer in plate fin heat sink with dimples and protrusions. Heat and Mass Transfer 55:2247–60. doi:10.1007/s00231-019-02561-w.
   Web of Science ®Google Scholar
• Cai, H. K., L. J. Su, Y. D. Liao, and Z. J. Weng. 2019. Numerical and experimental study on the influence of top bypass flow on the performance of plate fin heat exchanger. Applied Thermal Engineering 146 (5):356–63. doi:10.1016/j.applthermaleng.2018.10.007.
   Google Scholar
• Chen, H. T., Y. L. Hsieha, P. C. Chen, Y. F. Lin, and K. C. Liu. 2018. Numerical simulation of natural convection heat transfer for annular elliptical finned tube heat exchanger with experimental data. International Journal of Heat and Mass Transfer 127:541–54. doi:10.1016/j.ijheatmasstransfer.2018.08.057.
   Web of Science ®Google Scholar
• Fuentes, A. M., and Y. A. Loredo-Sáenz. 2018. Identifying the geometry parameters and fin type that lead to enhanced performance in tube-and-fin geometries. Applied Thermal Engineering 131 (25):793–805. doi:10.1016/j.applthermaleng.2017.12.057.
   Google Scholar
• Gong, C. Y., J. Shen, Y. Yu, K. Q. Wang, and Z. K. Tu. 2020. Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle. International Journal of Green Energy 17 (10):591–601. doi:10.1080/15435075.2020.1779078.
   Web of Science ®Google Scholar
• Han, Z. M., Z. M. Xu, and J. T. Wang. 2018. Numerical simulation on heat transfer characteristics of rectangular vortex generators with a hole. International Journal of Heat and Mass Transfer 126B:993–1001. doi:10.1016/j.ijheatmasstransfer.2018.06.081.
   Google Scholar
• Huo, S., N. J. Cooper, T. L. Smith, J. W. Park, and K. Jiao. 2017. Experimental investigation on PEM fuel cell cold start behavior containing porous metal foam as cathode flow distributor. Applied Energy 203 (1):101–14. doi:10.1016/j.apenergy.2017.06.028.
   Google Scholar
• Jo, T., B. Koo, Y. Lee, D. Kim, and D. Lee. 2018. Combined thermal characteristics analysis of steam reforming and combustion for 5 kW domestic PEMFC system. International Journal of Hydrogen Energy 43 (31):14226–37. doi:10.1016/j.ijhydene.2018.05.159.
   Web of Science ®Google Scholar
• Lin, R., X. W. Lin, Y. M. Weng, and Y. S. Ren. 2015. Evolution of thermal drifting during and after cold start of proton exchange membrane fuel cell by segmented cell technology. International Journal of Hydrogen Energy 40 (23):7370–81. doi:10.1016/j.ijhydene.2015.04.045.
   Web of Science ®Google Scholar
• Lin, R., Y. S. Ren, X. W. Lin, Z. H. Jiang, Z. Yang, and Y. T. Chang. 2017. Investigation of the internal behavior in segmented PEMFCs of different flow fields during cold start process. Energy 123 (15):367–77. doi:10.1016/j.energy.2017.01.138.
   Google Scholar
• Luo, M. J., C. Y. Huang, W. Liu, Z. P. Luo, and M. Pan. 2010. Degradation behaviors of polymer electrolyte membrane fuel cell under freeze/thaw cycles. International Journal of Hydrogen Energy 35 (7):2986–93. doi:10.1016/j.ijhydene.2009.06.036.
   Web of Science ®Google Scholar
• Luo, Y. Q., and K. Jiao. 2018. Cold start of proton exchange membrane fuel cell. Progress in Energy and Combustion Science 64:29–61. doi:10.1016/j.pecs.2017.10.003.
   Web of Science ®Google Scholar
• Mohamad, A. S., S. S. Ajarostaghi, and A. D. Mojtaba. 2018. Waste heat recovery from a 1180 kW proton exchange membrane fuel cell (PEMFC) system by Recuperative organic Rankine cycle (RORC). Energy 157 (15):353–66. doi:10.1016/j.energy.2018.05.132.
   Google Scholar
• Mohammad, S., and D. Toghraie. 2018. Numerical simulation of heat transfer enhancement in a plate-fin heat exchanger using a new type of vortex generators. Applied Thermal Engineering 133 (25):671–81. doi:10.1016/j.applthermaleng.2018.01.062.
   Google Scholar
• Nguyen, H. Q., A. M. Aris, and B. Shabani. 2016. PEM fuel cell heat recovery for preheating inlet air in standalone solar-hydrogen systems for telecommunication applications: an exergy analysis. International Journal of Hydrogen Energy 41 (4):2987–3003. doi:10.1016/j.ijhydene.2015.12.108.
   Web of Science ®Google Scholar
• Pethkool, S., S. Eiamsaard, S. Kwankaomeng, and P. Promvonge. 2011. Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube. International Communications in Heat and Mass Transfer 38 (3):340–47. doi:10.1016/j.icheatmasstransfer.2010.11.014.
   Web of Science ®Google Scholar
• Ramtin, B., M. K. Moraveji, and A. Aloueyan. 2016. Experimental investigation on heat transfer characteristics and pressure drop of BPHE (brazed plate heat exchanger) using TiO2-water nanofluid. Experimental Thermal and Fluid Science 74:11–18. doi:10.1016/j.expthermflusci.2015.11.018.
   Web of Science ®Google Scholar
• Saha, A. K., and S. Acharya. 2003. Parametric study of unsteady flow and heat transfer in a pin-fin heat exchanger. International Journal of Heat and Mass Transfer 46 (20):3815–30. doi:10.1016/S0017-9310(03)00190-X.
   Web of Science ®Google Scholar
• Salva, J. A., A. Iranzo, F. Rosa, and E. Tapia. 2016. Experimental validation of the polarization curve and the temperature distribution in a PEMFC stack using a one dimensional analytical model. International Journal of Hydrogen Energy 41 (45):20615–32. doi:10.1016/j.ijhydene.2016.09.152.
   Web of Science ®Google Scholar
• Sarafraz, M. M., V. Nikkhah, S. A. Madani, M. Jafarian, and F. Hormozi. 2017. Low-frequency vibration for fouling mitigation and intensification of thermal performance of a plate heat exchanger working with CuO/water nanofluid. Applied Thermal Engineering 121 (5):388–99. doi:10.1016/j.applthermaleng.2017.04.083.
   Google Scholar
• Song, K. W., and T. Tagawa. 2018. The optimal arrangement of vortex generators for best heat transfer enhancement in flat-tube-fin heat exchanger. International Journal of Heat and Mass Transfer 132:355–67. doi:10.1016/j.ijthermalsci.2018.06.011.
   Google Scholar
• Song, K. W., T. Tagawa, Z. H. Chen, and Q. Zhang. 2019. Heat transfer characteristics of concave and convex curved vortex generators in the channel of plate heat exchanger under laminar flow. International Journal of Thermal Sciences 137:215–28. doi:10.1016/j.ijthermalsci.2018.11.002.
   Web of Science ®Google Scholar
• Taler, D., and J. Taler. 2019. Prediction of heat transfer correlations in a low-loaded plate- fin-and-tube heat exchanger based on flow-thermal tests. Applied Thermal Engineering 148 (5):641–49. doi:10.1016/j.applthermaleng.2018.11.060.
   Google Scholar
• Tong, Z. M., Z. W. Cheng, and S. G. Tong. 2020. A review on the development of compressed air energy storage in China: technical and economic challenges to commercialization. Renewable and Sustainable Energy Reviews 135:110178. doi:10.1016/j.rser.2020.110178.
   Web of Science ®Google Scholar
• Wang, B. W., K. C. Wu, F. Q. Xi, J. Xuan, X. Xie, X. Y. Wang, et al. 2019. Numerical analysis of operating conditions effects on PEMFC with anode recirculation. Energy173 (15):844–56. doi:10.1016/j.energy.2019.02.115.
   Google Scholar
• Wang, J. S., J. Yu, and X. L. Liu. 2019. Heat transfer and flow characteristics in a rectangular channel with small scale vortex generators. International Journal of Heat and Mass Transfer 138:208–25. doi:10.1016/j.ijheatmasstransfer.2019.03.138..
   Web of Science ®Google Scholar
• Wang, Z., Z. Wu, F. H. Han, and L. W. Sundén. 2018. Experimental comparative evaluation of a graphene nanofluid coolant in miniature plate heat exchanger. International Journal of Thermal Sciences 130:148–56. doi:10.1016/j.ijthermalsci.2018.04.021.
   Web of Science ®Google Scholar
• William, A. D., Y. Kang, P. Hrnjak, and A. M. Jacobi. 2019. Effect of inclination on heat transfer and flow regimes in large flattened-tube steam condensers. Applied Thermal Engineering 148 (5):999–1006. doi:10.1016/j.applthermaleng.2018.11.078.
   Google Scholar
• Yan, Q. G., H. Toghiani, Y. W. Lee, K. W. Liang, and H. Causey. 2006. Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components. Journal of Power Sources 160 (2):1242–50. doi:10.1016/j.jpowsour.2006.02.075.
   Web of Science ®Google Scholar
• Yang, Z. R., Q. Du, Z. W. Jia, C. G. Yang, and K. Jiao. 2019. Effects of operating conditions on water and heat management by a transient multi-dimensional PEMFC system model. Energy 183 (15):8462–76. doi:10.1016/j.energy.2019.06.148.
   Google Scholar
• Yao, L., J. Peng, J. B. Zhang, and Y. J. Zhang. 2018. Numerical investigation of cold-start behavior of polymer electrolyte fuel cells in the presence of super-cooled water. International Journal of Hydrogen Energy 43 (32):15505–20. doi:10.1016/j.ijhydene.2018.06.112.
   Web of Science ®Google Scholar
• Zhan, Z. G., H. L. Zhao, P. C. Sui, P. X. Jiang, M. Pan, and N. Djilali. 2018. Numerical analysis of ice-induced stresses in the membrane electrode assembly of a PEM fuel cell under sub-freezing operating conditions. International Journal of Hydrogen Energy 43 (9):4563–82. doi:10.1016/j.ijhydene.2018.01.064.
   Web of Science ®Google Scholar
• Zhang, Q. G., L. F. Xu, J. Q. Li, and M. G. Ouyang. 2017. Performance prediction of plate-fin radiator for low temperature preheating system of proton exchange membrane fuel cells using CFD simulation. International Journal of Hydrogen Energy 42 (38):24504–16. doi:10.1016/j.ijhydene.2017.07.210.
   Web of Science ®Google Scholar
• Zhu, J. L., W. Zhang, Y. X. Lia, P. Ji, and W. C. Wang. 2019. Experimental study of flow distribution in plate–fin heat exchanger and its influence on natural gas liquefaction performance. Applied Thermal Engineering155 (5):398–417. doi:10.1016/j.applthermaleng.2019.04.020.
   Google Scholar