References
- Aguiar, P., C. S. Adjiman, and N. P. Brandon. 2005. Anode-supported intermediate-temperature direct internal reforming solid oxide fuel cell: II. Model-based dynamic performance and control. Journal of Power Sources 147 (1):136–47, September. doi:https://doi.org/10.1016/j.jpowsour.2005.01.017.
- Akhtar, N., S. P. Decent, D. Loghin, and K. Kendall. 2009. A three-dimensional numerical model of a single-chamber solid oxide fuel cell. International Journal of Hydrogen Energy 34 (20):8645–63, October. doi:https://doi.org/10.1016/j.ijhydene.2009.07.113.
- Andersson, M., J. Yuan, and B. Sunden. 2012. SOFC modeling considering electrochemical reactions at the active three phase boundaries. International Journal of Heat and Mass Transfer 55 (4):773–88, January. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.032.
- Andersson, M., J. Yuan, and B. Sundén. 2014. SOFC cell design optimization using the finite element method based CFD approach. Fuel Cells 14 (2):177–88. doi:https://doi.org/10.1002/fuce.201300160.
- Andreassi, L., G. Rubeo, S. Ubertini, P. Lunghi, and R. Bove. 2007. Experimental and numerical analysis of a radial flow solid oxide fuel cell. International Journal of Hydrogen Energy 32 (17):4559–74, December doi:https://doi.org/10.1016/j.ijhydene.2007.07.047.
- Borer, N. K., S. C. Geuther, B. L. Litherland, and L. W. Kohlman. 2018. Design and performance of a hybrid-electric fuel cell flight demonstration concept. 2018 Aviation Technology, Integration, and Operations Conference, Atlanta, GA: 3357.
- Cable, T. L., J. A. Setlock, S. C. Farmer, and A. J. Eckel. 2011. Regenerative performance of the NASA symmetrical solid oxide fuel cell design. International Journal of Applied Ceramic Technology 8 (1):1–12. doi:https://doi.org/10.1111/j.1744-7402.2009.02477.x.
- Cable, T. L., and S. W. Sofie. 2007. A symmetrical, planar SOFC design for NASA’s high specific power density requirements. Journal of Power Sources 174 (1):221–27, November. doi:https://doi.org/10.1016/j.jpowsour.2007.08.110.
- Campanari, S., and P. Iora. 2005. Comparison of finite volume SOFC models for the simulation of a planar cell geometry. Fuel Cells 5 (1):34–51. doi:https://doi.org/10.1002/fuce.200400057.
- Chen, B., H. Xu, and M. Ni. 2016. Modelling of finger-like channelled anode support for SOFCs application. Science Bulletin 61 (17):1324–32, September. doi:https://doi.org/10.1007/s11434-016-1131-x.
- Chen, B., H. Xu, P. Tan, Y. Zhang, X. Xu, W. Cai, M. Chen, and M. Ni. 2019. Thermal modelling of ethanol-fuelled solid oxide fuel cells. Applied Energy 237:476–86, March. doi:https://doi.org/10.1016/j.apenergy.2019.01.025.
- Christman, K. L., and M. K. Jensen. 2010. Solid Oxide fuel cell performance with cross-flow roughness. Journal of Fuel Cell Science and Technology 8 (2):024501–024501–5, December. doi:https://doi.org/10.1115/1.4002399.
- Danilov, V. A., and M. O. Tade. 2009. A CFD-based model of a planar SOFC for anode flow field design. International Journal of Hydrogen Energy 34 (21):8998–9006, November. doi:https://doi.org/10.1016/j.ijhydene.2009.08.073.
- Dikwal, C. M., W. Bujalski, and K. Kendall. 2009. The effect of temperature gradients on thermal cycling and isothermal ageing of micro-tubular solid oxide fuel cells. Journal of Power Sources 193 (1):241–48, August. doi:https://doi.org/10.1016/j.jpowsour.2009.01.097.
- Dillig, M., J. Leimert, and J. Karl. 2014. Planar high temperature heat pipes for SOFC/SOEC stack applications. Fuel Cells 14 (3):479–88, June. doi:https://doi.org/10.1002/fuce.201300224.
- Dillig, M., T. Meyer, and J. Karl. 2015. Integration of planar heat pipes to solid oxide cell short stacks. Fuel Cells 15 (5):742–48. doi:https://doi.org/10.1002/fuce.201400198.
- Dillig, M., T. Plankenbühler, and J. Karl. 2018. Thermal effects of planar high temperature heat pipes in solid oxide cell stacks operated with internal methane reforming. Journal of Power Sources 373:139–49, January. doi:https://doi.org/10.1016/j.jpowsour.2017.11.007.
- Dokamaingam, P., N. Laosiripojana, A. Soottitantawat, and S. Assabumrungrat. 2010. Alternative concept for SOFC with direct internal reforming operation: Benefits from inserting catalyst rod. AIChE Journal 56 (6):1639–50. doi:https://doi.org/10.1002/aic.12091.
- Dokamaingam, P., S. Assabumrungrat, A. Soottitantawat, I. Sramala, and N. Laosiripojana. 2009. Modeling of SOFC with indirect internal reforming operation: Comparison of conventional packed-bed and catalytic coated-wall internal reformer. International Journal of Hydrogen Energy 34 (1):410–21, January. doi:https://doi.org/10.1016/j.ijhydene.2008.10.055.
- Faghri, A. 2012. Review and advances in heat pipe science and technology. Journal of Heat Transfer 134 (12), December. doi:https://doi.org/10.1115/1.4007407.
- Fardadi, M., D. F. McLarty, and F. Jabbari. 2016. Investigation of thermal control for different SOFC flow geometries. Applied Energy 178:43–55, September. doi:https://doi.org/10.1016/j.apenergy.2016.06.015.
- Fischer, K., and J. R. Seume. 2009. Location and magnitude of heat sources in solid oxide fuel cells. Journal of Fuel Cell Science and Technology 6 (1), February. doi:https://doi.org/10.1115/1.2971042.
- Fuller, E. N., K. Ensley, and J. C. Giddings. 1969. Diffusion of halogenated hydrocarbons in helium. The effect of structure on collision cross sections. The Journal of Physical Chemistry 73 (11):3679–85, November. doi:https://doi.org/10.1021/j100845a020.
- Incropera, F. P., and A. S. Lavine. 2011. Fundamentals of heat and mass transfer. New York: John Wiley & Sons.
- Inui, Y., N. Ito, T. Nakajima, and A. Urata. 2006. Analytical investigation on cell temperature control method of planar solid oxide fuel cell. Energy Conversion and Management 47 (15):2319–28, September. doi:https://doi.org/10.1016/j.enconman.2005.11.007.
- Kalib, N. S., A. Muchtar, M. R. Somalu, N. A. M. N. Aman, and J. C. W. Mah. 2019. Influence of heat transfer on thermal stress development in solid oxide fuel cells: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 54 (2):175–84.
- Kendall, K., B. Liang, and M. Kendall. 2017. Microtubular SOFC (mSOFC) system in mobile robot applications. ECS Transactions 78 (1):237–42, May. doi:https://doi.org/10.1149/07801.0237ecst.
- Khazaee, I., and A. Rava. 2017. Numerical simulation of the performance of solid oxide fuel cell with different flow channel geometries. Energy 119:235–44, January. doi:https://doi.org/10.1016/j.energy.2016.12.074.
- Leah, R. T., A. Bone, E. Hammer, A. Selcuk, M. Rahman, A. Clare, S. Mukerjee, and M. Selby. 2017. Development progress on the ceres power steel cell technology platform: Further progress towards commercialization. ECS Transactions 78 (1):87–95, May. doi:https://doi.org/10.1149/07801.0087ecst.
- Leah, R. T., M. Lankin, A. Bone, S. Mukerjee, and M. Selby. 2015. Kinetics of internal methane reforming on the anodes of low temperature ceres power steel cell SOFCs. ECS Transactions 68 (1):1137–49, February. doi:https://doi.org/10.1149/06801.1137ecst.
- Li, Y., H. Yan, Z. Zhou, and W.-T. Wu. 2019. Three-dimensional nonisothermal modeling of solid oxide fuel cell coupling electrochemical kinetics and species transport. International Journal of Energy Research43 (13):6907-6921.
- Manglik, R. M., and Y. N. Magar. 2015. Heat and mass transfer in planar anode-supported solid oxide fuel cells: Effects of interconnect fuel/oxidant channel flow cross section. Journal of Thermal Science and Engineering Applications 7 (4):041003, December. doi:https://doi.org/10.1115/1.4030636.
- Mirahmadi, A., and K. Valefi. 2011. Study of thermal effects on the performance of micro-tubular solid-oxide fuel cells. Ionics 17 (9):767–83, December. doi:https://doi.org/10.1007/s11581-011-0559-x.
- Mukerjee, S., R. Leah, M. Selby, G. Stevenson, and N. P. Brandon. 2017. Chapter 9 - Life and reliability of solid oxide fuel cell-based products: A review. In Solid oxide fuel cell lifetime and reliability, ed. N. P. Brandon, E. Ruiz-Trejo, and P. Boldrin, 173–91. Academic Press. doi:https://doi.org/10.1016/B978-0-08-101102-7.00009-X.
- Ni, M. 2010. 2D thermal-fluid modeling and parametric analysis of a planar solid oxide fuel cell. Energy Conversion and Management 51 (4):714–21, April. doi:https://doi.org/10.1016/j.enconman.2009.10.028.
- Panthi, D., and A. Tsutsumi. 2014. Micro-tubular solid oxide fuel cell based on a porous yttria-stabilized zirconia support. Scientific Reports 4:5754, August. doi:https://doi.org/10.1038/srep05754.
- Poling, B. E., J. M. Prausnitz, and J. P. O’Connell. 2001. The properties of gases and liquids. 5th ed. New York, NY: McGraw-Hill.
- Ramachandran, R. S., C. Kleinstreuer, and T.-Y. Wang. 1989. Forced convection heat transfer of interacting spheres. Numerical Heat Transfer, Part A: Applications 15 (4):471–87, June. doi:https://doi.org/10.1080/10407788908944699.
- Recknagle, K. P., R. E. Williford, L. A. Chick, D. R. Rector, and M. A. Khaleel. 2003. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks. Journal of Power Sources 113 (1):109–14, January. doi:https://doi.org/10.1016/S0378-7753(02)00487-1.
- Shi, J., and X. Xue. 2010. CFD analysis of a novel symmetrical planar SOFC design with micro-flow channels. Chemical Engineering Journal 163 (1):119–25, September. doi:https://doi.org/10.1016/j.cej.2010.07.031.
- Todd, B., and J. B. Young. 2002. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling. Journal of Power Sources 110 (1):186–200, July. doi:https://doi.org/10.1016/S0378-7753(02)00277-X.
- Wongchanapai, S., H. Iwai, M. Saito, and H. Yoshida. 2012. Selection of suitable operating conditions for planar anode-supported direct-internal-reforming solid-oxide fuel cell. Journal of Power Sources 204:14–24, April. doi:https://doi.org/10.1016/j.jpowsour.2011.12.029.
- Wu, X., D. Yang, J. Wang, and X. Li. 2019. Temperature gradient control of a solid oxide fuel cell stack. Journal of Power Sources 414:345–53, February. doi:https://doi.org/10.1016/j.jpowsour.2018.12.058.
- Xu, H., B. Chen, H. Zhang, W. Kong, B. Liang, and M. Ni. 2017. The thermal effect in direct carbon solid oxide fuel cells. Applied Thermal Engineering 118:652–62, May. doi:https://doi.org/10.1016/j.applthermaleng.2017.03.027.
- Xu, H., B. Chen, J. Liu, and M. Ni. 2016a. Modeling of direct carbon solid oxide fuel cell for CO and electricity cogeneration. Applied Energy 178:353–62, September. doi:https://doi.org/10.1016/j.apenergy.2016.06.064.
- Xu, H., B. Chen, P. Tan, Y. Zhang, Q. He, Z. Wu, and M. Ni. 2019. The thermal effects of all porous solid oxide fuel cells. Journal of Power Sources 440:227102, November. doi:https://doi.org/10.1016/j.jpowsour.2019.227102.
- Xu, H., J. Ma, P. Tan, B. Chen, Z. Wu, Y. Zhang, H. Wang, J. Xuan, and M. Ni. 2020. Towards online optimisation of solid oxide fuel cell performance: Combining deep learning with multi-physics simulation. Energy and AI 1:100003, August. doi:https://doi.org/10.1016/j.egyai.2020.100003.
- Xu, M., T. S. Li, M. Yang, M. Andersson, I. Fransson, T. Larsson, and B. Sundén. 2016b. Modeling of an anode supported solid oxide fuel cell focusing on thermal stresses. International Journal of Hydrogen Energy 41 (33):14927–40, September. doi:https://doi.org/10.1016/j.ijhydene.2016.06.171.
- Zeng, H., Y. Wang, Y. Shi, N. Cai, and D. Yuan. 2018. Highly thermal integrated heat pipe-solid oxide fuel cell. Applied Energy 216:613–19, April. doi:https://doi.org/10.1016/j.apenergy.2018.02.040.
- Zeng, H., Y. Wang, Y. Shi, N. Cai, X. Ye, and S. Wang. 2017a. Highly thermal-integrated flame fuel cell module with high temperature heatpipe. Journal of the Electrochemical Society 164 (13):F1478–F1482, January. doi:https://doi.org/10.1149/2.1591713jes.
- Zeng, Z., A. Sadeghpour, G. Warrier, and Y. S. Ju. 2017b. Experimental study of heat transfer between thin liquid films flowing down a vertical string in the Rayleigh-Plateau instability regime and a counterflowing gas stream. International Journal of Heat and Mass Transfer 108:830–40, May. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.066.
- Zeng, Z., Y. Qian, Y. Zhang, C. Hao, D. Dan, and W. Zhuge. 2020. A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks. Applied Energy 280:115899, December. doi:https://doi.org/10.1016/j.apenergy.2020.115899.
- Zhang, Z., D. Yue, C. He, S. Ye, W. Wang, and J. Yuan. 2014. Three-dimensional CFD modeling of transport phenomena in anode-supported planar SOFCs. Heat and Mass Transfer 50 (11):1575–86, November. doi:https://doi.org/10.1007/s00231-014-1356-7.
- Zhang, Z., D. Yue, G. Yang, J. Chen, Y. Zheng, H. Miao, W. Wang, J. Yuan, and N. Huang. 2015. Three-dimensional CFD modeling of transport phenomena in multi-channel anode-supported planar SOFCs. International Journal of Heat and Mass Transfer 84:942–54, May. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.097.
- Zheng, K., Q. Sun, and M. Ni. 2013. Local non-equilibrium thermal effects in solid oxide fuel cells with various fuels. Energy Technology 1 (1):35–41. doi:https://doi.org/10.1002/ente.201200014.