Investigation of mechanical factor of soil reinforced with four types of fibers: An integrated experimental and extreme learning machine approach

References

• Aggarwal, P. 2011. Application of jute fiber in the improvement of subgrade characteristics. Acee International Journal on Transportation & Urban Development.
   Google Scholar
• ASTM E1755-01. 2007. Standard method for the determination of ash in biomass. Annual Book of ASTM Standards 11 (5). ASTM International, Philadelphia, PA.
   Google Scholar
• Babu, G. L., A. K. Vasudevan, and M. K. Sayida. 2008. Use of coir fibers for improving the engineering properties of expansive soils. Journal of Natural Fibers 5 (1):61–75. doi:10.1080/15440470801901522.
   Web of Science ®Google Scholar
• Bordoloi, S., V. Kashyap, A. Garg, S. Sreedeep, L. Wei, and S. Andriyas. 2018a. Measurement of mechanical characteristics of fiber from a novel invasive weed: A comprehensive comparison with fibers from agricultural crops. Measurement 113:62–70. doi:10.1016/j.measurement.2017.08.044.
   Web of Science ®Google Scholar
• Bordoloi, S., S. K. Yamsani, A. Garg, S. Sreedeep, and S. Borah. 2015. Study on the efficacy of harmful weed species Eicchornia crassipes for soil reinforcement. Ecological Engineering 85:218–22. doi:10.1016/j.ecoleng.2015.09.082.
   Web of Science ®Google Scholar
• Dasaka, S. M., and K. S. Sumesh. 2011. Effect of coir fiber on the stress–Strain behavior of a reconstituted fine-grained soil. Journal of Natural Fibers 8 (3):189–204. doi:10.1080/15440478.2011.601597.
   Web of Science ®Google Scholar
• Dutta, R. K., K. Dutta., and Jeevanandham. 2015. Prediction of deviator stress of sand reinforced with waste plastic strips using neural network. International Journal of Geosynthetics and Ground Engineering 1 (2):11. doi:10.1007/s40891-015-0013-7.
   Google Scholar
• Ellis, G. W., C. Yao, R. Zhao, and D. Penumadu. 1995. Stress-strain modeling of sands using artificial neural networks. Journal of Geotechnical Engineering 121 (5):429–35. doi:10.1061/(ASCE)0733-9410.
   Google Scholar
• Garg, A., J. Li, C. Berretta, and A. Garg. 2017a. A new computational approach for estimation of wilting point for green infrastructure. In Measurement, Elsevier. In press doi:10.1016/j.measurement.2017.07.026.
   Google Scholar
• Garg, A., V. Vijayaraghavan, J. Zhang, and J. S. L. Lam. 2017b. Robust model design for evaluation of power characteristics of the cleaner energy system. Renewable Energy 112:302–13. doi:10.1016/j.renene.2017.05.041.
   Web of Science ®Google Scholar
• Garg, A., V. Vijayaraghavan, J. Zhang, S. Li, and X. Liang. 2017c. Design of robust battery capacity model for electric vehicle by incorporation of uncertainties. International Journal Energy Researcher 41 (10):1436–51. doi:10.1002/er.3723.
   Web of Science ®Google Scholar
• Garg., A., A. Garg., K. Tai, and S. Sreedeep. 2014. An Integrated SRM-multi-gene genetic programming approach for prediction of factor of safety of 3D soil nailed slopes. Engineering Applications of Artificial Intelligence 30 (1):30–40. doi:10.1016/j.engappai.2013.12.011.
   Google Scholar
• Hearle, J. W., and W. E. Morton. 2008. Physical properties of textile fibres. Elsevier.
   Google Scholar
• Hejazi, S. M., M. Sheikhzadeh, S. M. Abtahi, and A. Zadhoush. 2012. A simple review of soil reinforcement by using natural and synthetic fibers. Construction and Building Materials 30:100–16. doi:10.1016/j.conbuildmat.2011.11.045.
   Web of Science ®Google Scholar
• Huang, G. B. 2015. What are extreme learning machines? Filling the gap between Frank Rosenblatt’s dream and John von Neumann’s puzzle. Cognitive Computation 7 (3):263–78. doi:10.1007/s12559-015-9333-0.
   Web of Science ®Google Scholar
• Huang, G. B., Q. Y. Zhu, and C. K. Siew. 2006. Extreme learning machine: Theory and applications. Neurocomputing 70 (1–3):489–501. doi:10.1016/j.neucom.2005.12.126.
   Web of Science ®Google Scholar
• IS-1670. 1991. Determination of breaking load and elongation at break of single strand textiles and yarns. New Delhi: Bureau of Indian Standards Publications.
   Google Scholar
• IS-2720 (Part 10). 1991. Determination of unconfined compressive strength. New Delhi: Bureau of Indian Standards Publications.
   Google Scholar
• IS-2720-Part 3-1980. 1980. Methods of test for soils. Determination of specific gravity. New Delhi: Bureau of Indian Standards Publications.
   Google Scholar
• Jenkins, S. H. 1930. The determination of cellulose in straws. The Biochemical Journal 24 (5):1428–32.
   PubMedGoogle Scholar
• Johari, A., A. A. Javadi, and G. Habibagahi. 2011. Modelling the mechanical behavior of unsaturated soils using a genetic algorithm-based neural network. Computers & Geotechnics 2011 38 (1):2–13. doi:10.1016/j.compgeo.2010.08.011.
   Web of Science ®Google Scholar
• Joshi, M., M. Shaw, and B. S. Butola. 2004. Studies on composite filaments from nanoclay reinforced polypropylene. Fibers and Polymers 5 (1):59–67. doi:10.1007/BF02875496.
   Web of Science ®Google Scholar
• Khanlari, G. R., M. Heidari, A. A. Momeni, and Y. Abdilor. 2012. Prediction of shear strength parameters of soils using artificial neural networks and multivariate regression methods. Engineering Geology 131-132(137-138:11–18. doi:10.1016/j.enggeo.2011.12.006.
   Web of Science ®Google Scholar
• Kurugodu, H. V., S. Bordoloi, Y. Hong, A. Garg, A. Garg, S. Sreedeep, and A. H. Gandomi. 2018b. Genetic programming for soil-fiber composite assessment. Advances in Engineering Software 122:50–61. doi:10.1016/j.advengsoft.2018.04.004.
   Web of Science ®Google Scholar
• Maher, M. H., and D. H. Gray. 1990. Static response of sands reinforced with randomly distributed fibers. Journal of Geotechnical Engineering 116 (11):1661–77. doi:10.1061/(ASCE)0733-9410.
   Google Scholar
• Maher, M. H., and Y. C. Ho. 1994. Mechanical properties of kaolinite/fiber soil composite. Journal of Geotechnical Engineering 120 (8):1381–93. doi:10.1061/(ASCE)0733-9410.
   Google Scholar
• Methacanon, P., U. Weerawatsophon, N. Sumransin, C. Prahsarn, and D. T. Bergado. 2010. Properties and potential application of the selected natural fibers as limited life geotextiles. Carbohydrate Polymers 82 (4):1090–96. doi:10.1016/j.carbpol.2010.06.036.
   Web of Science ®Google Scholar
• Nataraj, M. S., and K. L. McManis. 1997. Strength and deformation properties of soils reinforced with fibrillated fibers. Geosynthetics International 4 (1):65–79. doi:10.1680/gein.4.0089.
   Web of Science ®Google Scholar
• Ramesh, H. N., K. Manoj, and H. V. Mamatha. 2010. Compaction and strength behavior of lime-coir fiber treated Black Cotton soil. Geomechanics and Engineering 2 (1):19–28. doi:10.12989/gae.2010.2.1.019.
   Web of Science ®Google Scholar
• Spiegelberg, H. L. 1966. The effect of hemicelluloses on the mechanical properties of individual pulp fibers. Tappi 49 (9):388–96.
   Google Scholar
• Subaida, E. A., S. Chandrakaran, and N. Sankar. 2009. Laboratory performance of unpaved reinforced with woven coir geotextitles. Geotextiles and Geomembranes 27 (3):204–10. doi:10.1016/j.geotexmem.2008.11.009.
   Web of Science ®Google Scholar
• Tang, C., B. Shi, W. Gao, F. Chen, and Y. Cai. 2007. Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilized clayey soil. Geotextiles and Geomembranes 25 (3):194–202. doi:10.1016/j.geotexmem.2006.11.002.
   Web of Science ®Google Scholar
• Test Methods, T. A. P. P. I. 1996. TAPPI T222. om-88 klason lignin.
   Google Scholar