Advanced search
Publication Cover
Journal of Natural Fibers Volume 17, 2020 - Issue 7
Submit an article Journal homepage
139
Views
4
CrossRef citations to date
0
Altmetric
Research Article

Comparative Chemical Analysis of the Rind and Pith of Totora (Schoenoplectus californicus) Stems

Juan Fernando Hidalgo-Corderoa ETSEM, Universidad Politécnica de Madrid, Madrid, SpainCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0002-2334-9569View further author information
ORCID Icon,
Esteban Revillab Forestry Products Department, Cellulose and Paper Laboratories, INIA-CIFOR, Madrid, SpainView further author information
&
Justo García-Navarroc ETSIAAB, Universidad Politécnica de Madrid, Madrid, SpainORCID Iconhttps://orcid.org/0000-0002-5268-1587View further author information
ORCID Icon
Pages 954-965 | Published online: 14 Nov 2018

References

  • Apóstolo, N. M. 2005. “Caracteres anatómicos de la vegetación costera del Río Salado (Noroeste de la provincia de Buenos Aires, Argentina).” Boletín de La Sociedad Argentina de Botánica 40 (3–4): 215–27. http://www.scielo.org.ar/scielo.php?script=sci_arttext&pid=S1851-23722005000200008.
  • Arreghini, S., de Cabo, L., Serafini, R., and de Iorio, A. F. 2017. “Effect of the combined addition of Zn and Pb on partitioning in sediments and their accumulation by the emergent macrophyte Schoenoplectus californicus.” Environmental Science and Pollution Research 24 (9): 8098–107. doi: 10.1007/s11356-017-8478-7.
  • Aza-Medina, L. C. 2016. “La totora como material de aislamiento térmico: propiedades y potencialidades (Master`s Thesis).” Universitat Politécnica de Catalunya. http://hdl.handle.net/2117/88419.
  • Buschhaus, C., and Jetter, R. 2012. “Composition and physiological function of the wax layers coating arabidopsis leaves: ß-amyrin negatively affects the intracuticular water barrier.” Plant Physiology 160 (2): 1120–29. doi: 10.1104/pp.112.198473.
  • Bychkov, A. L., Podgorbunskikh, E. M., Ryabchikova, E. I., and Lomovsky O. I. 2018. “The role of mechanical action in the process of the thermomechanical isolation of lignin.” Cellulose 25 (1): 1–5. doi: 10.1007/s10570-017-1536-y.
  • Carbajo, J. M. 2015. “Utilización de hongos de podredumbre blanca en la producción de pasta de celulosa de alto endimiento (Doctoral Thesis).” Universidad Complutense de Madrid. http://eprints.ucm.es/32794/1/T36284.pdf.
  • César, N. R., Pereira-da-Silva, M. A., Botaro, V. R., and de Menezes, A. J. 2015. “Cellulose nanocrystals from natural fiber of the macrophyte Typha domingensis: extraction and characterization.” Cellulose 22 (1): 449–60. doi: 10.1007/s10570-014-0533-7.
  • Condori, D. 2010. “Evaluación de las propiedades físicas químicas y ópticas del papel tipo glassine obtenido a partir de fibras de totora (Schoenoplectus tatora) (Bachelor`s thesis).” Universidad Nacional del Altiplano. http://repositorio.unap.edu.pe/bitstream/handle/UNAP/3365/Condori_Quispe_David.pdf?sequence=4&isAllowed=y.
  • Corsino, B., Torres, M., and Maranho, L. 2013. “Arquitetura do escapo de Schoenoplectus californicus (C.A. Mey.) Soják (Cyperaceae).” Iheringia Serie Botanica 68 (1): 27–35. https://isb.emnuvens.com.br/iheringia/article/view/36.
  • Dick Wille, V. K., Pedrazzi, C., Ludtke, R., Gatto, D. A., and Coldebella, R. 2016. “Produtividade e descrição morfológica das fibras de junco (Schoenoplectus californicus (C.A.Mey.) Soják – Cyperaceae) para produção de polpa e papel.” Revista Ciência Da Madeira - RCM 7 (1): 36–41. doi: 10.12953/2177-6830/rcm.v7n1p36-41.
  • Dick Wille, V. K., Pedrazzi, C., Colodette, J. L., Chaves de Oliveira, R., Coldebella, R., Mohr Giesbrecht, B., and de Oliveira Saccol, A. F. 2017. “Cellulose pulp produced from bulrush fiber.” Ciência Rural 47 (5). doi: 10.1590/0103-8478cr20160652.
  • Fernández Honaine, M., Borrelli, N. L., Osterrieth, M., and del Rio, L. 2013. “Amorphous silica biomineralizations in Schoenoplectus californicus (Cyperaceae): their relation with maturation stage and silica availability.” Boletin de La Sociedad Argentina de Botanica 48 (2): 247–59. http://www.scielo.org.ar/scielo.php?script=sci_abstract&pid=S1851-23722013000200006.
  • Heiser, C. 1978. “The totora (Scirpus californicus) in Ecuador and Peru.” Economic Botany 32 (3): 222–36. doi: 10.1007/BF02864698.
  • Heyerdahl, T. 1971. The Ra expeditions. Edited by P. Crampton, and G. Alle. London, Great Britain: George Allen & Unwin Ltd.
  • Hidalgo-Cordero, J. F., and García-Navarro, J. 2017. “Review on the traditional uses and potential of totora (Schoenoplectus californicus) as construction material.” In IOP Conference Series: Materials Science and Engineering. Vol. 245. Prague. doi: 10.1088/1757-899X/245/2/022068.
  • Hidalgo-Cordero, J. F., and García-Navarro, J. 2018. “Totora (Schoenoplectus californicus (C.A. Mey.) Soják) and its potential as a construction material.” Industrial Crops and Products 112 (May 2017): 467–80. doi: 10.1016/j.indcrop.2017.12.029.
  • Huang, H., Yao, W., Li, R., Ali, A., Du, J., Guo, D., Xiao, R., Guo, Z., Zhang, Z., and Awasthi, M. K. 2018. “Effect of pyrolysis temperature on chemical form, behavior and environmental risk of Zn, Pb and Cd in biochar produced from phytoremediation residue.” Bioresource Technology 249 (September 2017): 487–93. doi: 10.1016/j.biortech.2017.10.020.
  • ISO. 2008. “ISO 638:2008. Paper, board and pulps – determination of dry matter content – oven-drying method.”
  • ISO. 2015a. “ISO 1762. Paper, board and pulps - determination of residue (ash) on ignition at 525 degrees C.”
  • ISO. 2015b. “ISO 2144. Determination of residue (ash) on ignition at 900 degrees C.”
  • Lourenço, A., Gominho, J., Curt, M. D., Revilla, E., Villar, J. C., and Pereira, H. 2017. “Steam explosion as a pretreatment of Cynara cardunculus prior to delignification.” Industrial and Engineering Chemistry Research 56 (1): 424–33. doi: 10.1021/acs.iecr.6b03854.
  • Macía, M. J., and Balslev, H. 2000. “Use and management of totora (Schoenoplectus californicus, Cyperaceae) in Ecuador.” Economic Botany 54 (1): 82–89. doi: 10.1007/BF02866602.
  • Mardorf, M. C. 1985. “Artesanía y ecología de la totora (Scirpus sp.) en la provincia de lmbabura, Ecuador.” Sarance. Revista Del Instituto Otavaleño De Antropología 10 (10): 11–78. http://hdl.handle.net/10469/6697.
  • Martin-Sampedro, R., Revilla, E., Villar, J. C., and Eugenio, M. E. 2014. “Enhancement of enzymatic saccharification of Eucalyptus globulus: steam explosion versus steam treatment.” Bioresource Technology 167: 186–91. doi: 10.1016/j.biortech.2014.06.027.
  • Mejía, C., Ojeda, D., and Goyos, L. 2017. “Mechanical behavior under tension of Schoenoplectus californicus fiber.” Journal of Natural Fibers 00 (00): 1–9. doi: 10.1080/15440478.2017.1401506.
  • Moghaddam, M. K., and Mortazavi, S.M. 2016. “Physical and chemical properties of natural fibers extracted from typha australis leaves.” Journal of Natural Fibers 13 (3): 353–61. doi: 10.1080/15440478.2015.1029199.
  • Ninaquispe, L., Weeks, S., and Huelman, P. 2012. “Totora: a sustainable insulation material for the andean parts of Peru.” In PLEA2012-28th Conference, Opportunities, Limits & Needs Towards an Environmentally Responsible Architecture. Lima. http://plea-arch.org/ARCHIVE/2012/files/T02-20120130-0067.pdf.
  • Omari, H. E., Belfkira, A., and Brouillette, F. 2017. “Paper properties of Typha latifolia, Pennisetum alopecuroides, and Agave americana fibers and their effect as a substitute for kraft pulp fibers.” Journal of Natural Fibers 14 (3): 426–36. doi. 10.1080/15440478.2016.1212766
  • Rondón, X. J., Banack, S. A., and Diaz-Huamanchumo, W. 2003. “Ethnobotanical investigation of caballitos (Schoenoplectus californicus: Cyperaceae) in Huanchaco, Peru.” Economic Botany 57 (1): 35–47. doi: 10.1663/0013-0001(2003)057[0035:EIOCSC]2.0.CO;2.
  • Simbaña, A. 2006. “Usos y aprovechamiento actual de la totora (Schoenoplectus californicus) en Imbabura,” 1.
  • Sluiter, A., Hames, B., Ruiz, R., Scarlata, C., Sluiter, J., Templeton, D., and Crocker, D. 2012. “NREL/TP-510-42618 analytical procedure - determination of structural carbohydrates and lignin in biomass.” Laboratory Analytical Procedure (LAP), no. April 2008: 17. https://doi.org/NREL/TP-510-42618.
  • Technical Association of Pulp and Paper Industry. 1997. “T204 Cm-97. Solvent extractives of wood and pulp.” TAPPI Test Methods. doi: 10.5772/916.
  • Technical Association of Pulp and Paper Industry. 1999a. “T203 Cm-99. Alpha-, beta- and gamma-cellulose in pulp.” TAPPI Test Methods.
  • Technical Association of Pulp and Paper Industry. 1999b. “T207cm-99. Water solubility of wood and pulp.” TAPPI Test Methods.
  • Technical Association of Pulp and Paper Industry. 2006. “T222 Om-02. Acid-insoluble lignin in wood and pulp.” TAPPI Test Methods. doi:10.1023/a:1019003230537.
  • Technical Association of Pulp and Paper Industry. 2014. “T257. Sampling and Preparing Wood for Analysis.”
  • Wise, L. E., Murphy, M., and D’Addieco, A. A. 1946. “Chlorite holocellulose, its fractionation and bearing on summative wood analysis and on studies on the hemicelluloses.” Paper Trade Journal 122 (2): 35–43.

Datasets

  • Hidalgo-Cordero, J. F., Revilla, E., and Garcia Navarro, J. (2018), “Results of the comparative chemical analysis of the rind and pith of totora (Schoenoplectus californicus (C.A. Mey.) Soják) stems”, Mendeley Data, 6 doi: 10.17632/rtd9dnz5k5.6

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.