Drilling Behavior of Flax/Poly(Lactic Acid) Bio-Composite Laminates: An Experimental Investigation

References

• Abdul Nasir, A. A., A. I. Azmi, and A. N. M. Khalil. 2015. Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites. Measurement: Journal of the International Measurement Confederation 75:298–307. Elsevier Ltd. doi:10.1016/j.measurement.2015.07.046.
   Web of Science ®Google Scholar
• Abrão, A. M., J. C. Campos Rubio, P. E. Faria, and J. P. Davim. 2008. The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite. Materials and Design 29 (2):508–13. doi:10.1016/j.matdes.2007.01.016.
   Web of Science ®Google Scholar
• Alimuzzaman, S. 2013. Nonwoven flax fibre reinforced PLA biodegradable composites, 212. http://www.manchester.ac.uk/library.
   Google Scholar
• Chegdani, F., S. Mezghani, M. El Mansori, and A. Mkaddem. 2015. Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics. Wear 332–333:772–79. Elsevier. doi:10.1016/j.wear.2014.12.039.
   Web of Science ®Google Scholar
• Chen, W. 1997. Some experimental investigations in the drilling of Carbon Fiber-Reinforced Plastic (CFRP) composite laminates. International Journal of Machine Tools and Manufacture 37 (8):1097–108. doi:10.1016/S0890-6955(96)00095-8.
   Web of Science ®Google Scholar
• Fan, J., and J. Njuguna. 2016. An introduction to lightweight composite materials and their use in transport structures. Lightweight composite structures in transport: Design, manufacturing, analysis and performance. Elsevier Ltd., Woodhead Publishing- Sawston, Cambridge, doi:10.1016/B978-1-78242-325-6.00001-3.
   Google Scholar
• Faraz, A., D. Biermann, and K. Weinert. 2009. Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates. International Journal of Machine Tools and Manufacture 49 (15):1185–96. Elsevier. doi:10.1016/j.ijmachtools.2009.08.002.
   Web of Science ®Google Scholar
• Ho, M.-P., H. Wang, J. H. Lee, C. K. Ho, K. T. Lau, J. Leng, and D. Hui. 2012. Critical factors on manufacturing processes of natural fibre composites. Composites Part B 8 (8):3549–62. Elsevier Ltd. doi:10.1016/j.compositesb.2011.10.001.
   Google Scholar
• Ho-Cheng, H., and C. K. H. Dharan. 1990. Delamination during drilling in composite laminates. Journal of Engineering for Industry 112 (3):236. doi:10.1115/1.2899580.
   Google Scholar
• Hocheng, H., and C. C. Tsao. 2005. The path towards delamination-free drilling of composite materials. Journal of Materials Processing Technology 167 (2–3):251–64. doi:10.1016/j.jmatprotec.2005.06.039.
   Web of Science ®Google Scholar
• Holbery, J., and D. Houston. 2006. Natural-fibre-reinforced polymer composites in automotive applications. Journal of Minerals, Metals and Material Society 58 (11):80–86. doi:10.1007/s11837-006-0234-2.
   Web of Science ®Google Scholar
• Ismail, S. O., H. N. Dhakal, E. Dimla, J. Beaugrand, and I. Popov. 2016a. Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates. Journal of Applied Polymer Science 133 (7). doi: 10.1002/app.42879.
   Web of Science ®Google Scholar
• Ismail, S. O., H. N. Dhakal, E. Dimla, J. Beaugrand, and I. Popov. 2016b. Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates. Journal of Applied Polymer Science 133 (7):1–8. doi:10.1002/app.42879.
   Web of Science ®Google Scholar
• Kavad, B. V., A. B. Pandey, M. V. Tadavi, and H. C. Jakharia. 2014. A review paper on effects of drilling on glass fiber reinforced plastic. Procedia Technology 14:457–64. Elsevier B.V. doi:10.1016/j.protcy.2014.08.058.
   Google Scholar
• Khashaba, U. A., I. A. El-Sonbaty, A. I. Selmy, and A. A. Megahed. 2010. Machinability analysis in drilling woven GFR/Epoxy composites: Part II - effect of drill wear. Composites Part A: Applied Science and Manufacturing 41 (9):1130–37. Elsevier Ltd. doi:10.1016/j.compositesa.2010.04.011.
   Web of Science ®Google Scholar
• Kwon, H. J., J. Sunthornvarabhas, J. W. Park, J. H. Lee, H. J. Kim, K. Piyachomkwan, K. Sriroth, and D. Cho. 2014. Tensile properties of kenaf fiber and corn husk flour reinforced poly(lactic acid) hybrid bio-composites: Role of aspect ratio of natural fibers. Composites Part B: Engineering 56:232–37. Elsevier Ltd. doi:10.1016/j.compositesb.2013.08.003.
   Web of Science ®Google Scholar
• Mazumder, P., Y. H. K. Reddy, M. P. Borsaikia, and S. Kashyap. 2016. Optimization of process parameters in drilling of bamboo fibre reinforced polymeric composites. International Journal of Science Technology and Managment 5 (5):422–34.
   Google Scholar
• Nassar, M. M. A., R. Arunachalam, and K. I. Alzebdeh. 2016. Machinability of natural fiber reinforced composites: A review. The International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-016-9010-9.
   PubMed Web of Science ®Google Scholar
• Nirmal, U., K. O. Low, and J. Hashim. 2012. On the effect of abrasiveness to process equipment using betelnut and glass fibres reinforced polyester composites. Wear 290–291:32–40. Elsevier. doi:10.1016/j.wear.2012.05.022.
   Web of Science ®Google Scholar
• Paulo, D. J., P. Reis, and C. Conceiçao António. 2004. Experimental study of drilling Glass Fiber Reinforced Plastics (GFRP) manufactured by hand lay-up. Composites Science and Technology 64 (2):289–97. doi:10.1016/S0266-3538(03)00253-7.
   Web of Science ®Google Scholar
• Pil, L., F. Bensadoun, J. Pariset, and I. Verpoest. 2016. Why are designers fascinated by Flax and Hemp fibre composites? Composites Part A: Applied Science and Manufacturing 83:193–205. Elsevier Ltd. doi:10.1016/j.compositesa.2015.11.004.
   Web of Science ®Google Scholar
• Pradeep, K. J., and P. Packiaraj. 2012. Effect of drilling parameter on surface roughness, tool wear, material, material removal rate and hole diameter errot in drilling of ohns. International Journal of Advanced Engineering Research and Studies 2249–8974:150–54.
   Google Scholar
• Rawat, S., and H. Attia. 2009. Wear mechanisms and tool life management of WC-co drills during dry high speed drilling of woven carbon fibre composites. Wear 267 (5–8):1022–30. doi:10.1016/j.wear.2009.01.031.
   Web of Science ®Google Scholar
• Saleem, M., L. Toubal, R. Zitoune, and H. Bougherara. 2013. Investigating the effect of machining processes on the mechanical behavior of composite plates with circular holes. Composites Part A: Applied Science and Manufacturing 55:169–77. Elsevier Ltd. doi:10.1016/j.compositesa.2013.09.002.
   Web of Science ®Google Scholar
• Singh, I., N. Bhatnagar, and P. Viswanath. 2008. Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study. Materials and Design 29 (2):546–53. doi:10.1016/j.matdes.2007.01.029.
   Web of Science ®Google Scholar
• Sreenivasulu, R., and C. Srinivasa Rao. December, 2016. “Effect of drilling parameters on thrust force and torque during drilling of aluminium 6061 alloy - based on taguchi design of experiments” M, 41–48.
   Google Scholar
• Sunny, T., J. Babu, and J. Philip. 2014. Experimental studies on effect of process parameters on delamination in drilling GFRP composites using taguchi method. Procedia Materials Science 6 (Icmpc):1131–42. Elsevier B.V. doi:10.1016/j.mspro.2014.07.185.
   Google Scholar
• Tsao, C. C., and H. Hocheng. 2004. Taguchi analysis of delamination associated with various drill bits in drilling of composite material. International Journal of Machine Tools and Manufacture 44 (10):1085–90. doi:10.1016/j.ijmachtools.2004.02.019.
   Web of Science ®Google Scholar
• Turki, Y., M. Habak, R. Velasco, Z. Aboura, K. Khellil, and P. Vantomme. 2014. Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites. International Journal of Machine Tools and Manufacture 87:61–72. Elsevier. doi:10.1016/j.ijmachtools.2014.06.004.
   Web of Science ®Google Scholar
• Velayudham, A., and R. Krishnamurthy. 2007. Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composites. Journal of Materials Processing Technology 185 (1–3):204–09. doi:10.1016/j.jmatprotec.2006.03.146.
   Web of Science ®Google Scholar