Physical and Thermal Properties of Novel Native Andean Natural Fibers

References

• Abdul Khalil, H. P. S., A. F. Ireana Yusra, A. H. Bhat, and M. Jawaid. 2010. Cell wall ultrastructure, anatomy, lignin distribution, and chemical composition of Malaysian cultivated kenaf fiber. Industrial Crops and Products 31 (1):113–21. doi:10.1016/j.indcrop.2009.09.008.
   Web of Science ®Google Scholar
• Adekomaya, O., T. Jamiru, R. Sadiku, and Z. Huan. 2017. Negative impact from the application of natural fibers. Journal of Cleaner Production 143 (Supplement C):843–46. doi:10.1016/j.jclepro.2016.12.037.
   Google Scholar
• Ahmad, T., H. S. Mahmood, Z. Ali, M. A. Khan, and S. Zia. 2017. Design and development of a portable sisal decorticator. Pakistan Journal of Agricultural Research 30 (3):9. doi:10.17582/journal.pjar/2017.30.3.209.217.
   Google Scholar
• Ahvenainen, P., I. Kontro, and S. Kirsi. 2016. Comparison of sample crystallinity determination methods by X-ray diffraction for challenging cellulose I materials. Cellulose 23 (2):1073–86. doi:10.1007/s10570-016-0881-6.
   Web of Science ®Google Scholar
• Ali, A., K. Shaker, Y. Nawab, M. Jabbar, T. Hussain, J. Militky, and V. Baheti. 2016. Hydrophobic treatment of natural fibers and their composites—A review. Journal of Industrial Textiles. 1528083716654468.
   Web of Science ®Google Scholar
• Alvarez, V. A., and V. Analía. 2006. Influence of fiber chemical modification procedure on the mechanical properties and water absorption of MaterBi-Y/sisal fiber composites. Composites Part A: Applied Science and Manufacturing 37 (10):1672–80. doi:10.1016/j.compositesa.2005.10.005.
   Web of Science ®Google Scholar
• Bachtiar, D., S. M. Sapuan, and M. M. Hamdan. 2009. The influence of alkaline surface fibre treatment on the impact properties of sugar palm fibre-reinforced epoxy composites. Polymer-Plastics Technology and Engineering 48 (4):379–83. doi:10.1080/03602550902725373.
   Web of Science ®Google Scholar
• Balaji, A. N., and K. J. Nagarajan. 2017. Characterization of alkali treated and untreated new cellulosic fiber from Saharan aloe vera cactus leaves. Carbohydrate Polymers 174:200–08. doi:10.1016/j.carbpol.2017.06.065.
   PubMed Web of Science ®Google Scholar
• Balnois, E., F. Busnel, C. Baley, and Y. Grohens. 2007. An AFM study of the effect of chemical treatments on the surface microstructure and adhesion properties of flax fibres. Composite Interfaces 14 (7–9):715–31. doi:10.1163/156855407782106537.
   Web of Science ®Google Scholar
• Belgacem, M. N., and A. Gandini. 2009. Chapter 2: Natural fibre-surface modification and characterization. Natural Fibre Reinforced Polymer Composites: from Macro to Nanoscale 14–46.
   Google Scholar
• Benyahia, A., A. Merrouche, M. Rokbi, and Z. Kouadri. 2013. Study the effect of alkali treatment of natural fibers on the mechanical behavior of the composite unsaturated Polyester-fiber Alfa. composites 2:3.
   Google Scholar
• Bismarck, A., A. Baltazar-Y-Jimenez, and K. Sarikakis. 2006. Green composites as panacea? Socio-economic aspects of green materials. Environment, Development and Sustainability 8 (3):445–63. doi:10.1007/s10668-005-8506-5.
   Google Scholar
• Blake, T. D. 1993. Dynamic contact angles and wetting kinetics. Wettability 49:251.
   Google Scholar
• Blake, T. D. 2006. The physics of moving wetting lines. Journal of Colloid and Interface Science 299 (1):1–13. doi:10.1016/j.jcis.2006.03.051.
   PubMed Web of Science ®Google Scholar
• Boopathi, L., P. S. Sampath, and K. Mylsamy. 2012. Investigation of physical, chemical and mechanical properties of raw and alkali treated borassus fruit fiber. Composites Part B: Engineering 43 (8):3044–52. doi:10.1016/j.compositesb.2012.05.002.
   Web of Science ®Google Scholar
• Borchani, K., C. Carrot, and M. Jaziri. 2015. Untreated and alkali treated fibers from Alfa stem: Effect of alkali treatment on structural, morphological and thermal features 22(3):1577–89.
   Google Scholar
• Brown, D., P. V. Colin Polsky, S. D. Bolstad, D. H. Brody, R. Kroh, T. Loveland, and A. M. Thomson. 2014. Land use and land cover change. In US global change research program, ed. J. M. Melillo, T. C. Richmond, and G. Q. Yohe, 318–32. Washington DC, United States(US): Pacific Northwest National Laboratory (PNNL), Richland, WA (US).
   Google Scholar
• Cao, Y., F. Chan, Y.-H. Chui, and H. Xiao. 2012. Characterization of Flax fibres modified by Alkaline, Enzyme, and Steam-heat treatments. 2012. Flax Fibres; Surface Treatments; Analysis; Properties7(3):4109–4121
   Google Scholar
• Charca, S., J. Noel, D. Andia, J. Flores, A. Guzman, C. Renteros, and J. Tumialan. 2015. Assessment of ichu fibers as non-expensive thermal insulation system for the Andean regions. Energy and Buildings 108:55–60. doi:10.1016/j.enbuild.2015.08.053.
   Web of Science ®Google Scholar
• Cherian, B. M., A. L. Leão, S. F. de Souza, L. M. M. Costa, G. M. de Olyveira, M. Kottaisamy, E. R. Nagarajan, and S. Thomas. 2011. Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications. Carbohydrate Polymers 86 (4):1790–98. doi:10.1016/j.carbpol.2011.07.009.
   Web of Science ®Google Scholar
• Cheung, H.-Y., H. Mei-po, K.-T. Lau, F. Cardona, and D. Hui. 2009. Natural fibre-reinforced composites for bioengineering and environmental engineering applications. Composites Part B: Engineering 40 (7):655–63. doi:10.1016/j.compositesb.2009.04.014.
   Web of Science ®Google Scholar
• COMMISSION, EUROPEAN. 2000. Directive 2000-53/EC of the European parliament and of the council of september 18, 2000 on end-of-life vehicles. Spain: Union OJotE.
   Google Scholar
• Das, M., and D. Chakraborty. 2008. Evaluation of improvement of physical and mechanical properties of bamboo fibers due to alkali treatment. Journal of Applied Polymer Science 107 (1):522–27. doi:10.1002/(ISSN)1097-4628.
   Web of Science ®Google Scholar
• Das, M., and D. Chakraborty. 2009. Effects of alkalization and fiber loading on the mechanical properties and morphology of bamboo fiber composites. II. Resol matrix. Journal of Applied Polymer Science 112 (1):447–53. doi:10.1002/app.v112:1.
   Web of Science ®Google Scholar
• Doan, T.-T.-L., H. Brodowsky, and M. Edith. 2012. Jute fibre/epoxy composites: Surface properties and interfacial adhesion. Composites Science and Technology 72 (10):1160–66. doi:10.1016/j.compscitech.2012.03.025.
   Web of Science ®Google Scholar
• El, O. A., Y. Chaabouni, S. Msahli, and F. Sakli. 2011. Crystal transition from cellulose I to cellulose II in NaOH treated Agave americana L. fibre. Carbohydrate Polymers 86 (3):1221–29. doi:10.1016/j.carbpol.2011.06.037.
   Web of Science ®Google Scholar
• Evert, R. F., K. Esau, and K. Esau. 2006. Esau’s Plant anatomy: Meristems, cells, and tissues of the plant body: Their structure, function, and development. New Jersey: John Wiley & Sons, Inc.
   Google Scholar
• Ferris, R. 2016. China auto regulatory trends 2016: New-energy, materials restrictions, recalls and emissions figure prominently. The National Law.
   Google Scholar
• French, A. D. 2014. Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21 (2):885–96. doi:10.1007/s10570-013-0030-4.
   Web of Science ®Google Scholar
• Fuentes, C. A., I. Verpoest, and A. W. Van Vuure. 2015. Chapter 4: Interfacial compatibility and adhesion in natural fiber composites. In Natural fiber composites, 139–68. CRC Press.
   Google Scholar
• Gañán, P., J. Cruz, S. Garbizu, A. Arbelaiz, and I. Mondragon. 2004. Stem and bunch banana fibers from cultivation wastes: Effect of treatments on physico‐chemical behavior. Journal of Applied Polymer Science 94 (4):1489–95. doi:10.1002/app.v94:4.
   Web of Science ®Google Scholar
• George, J. M., S. Sreekala, and S. Thomas. 2001. A review on interface modification and characterization of natural fiber reinforced plastic composites. Polymer Engineering & Science 41 (9):1471–85. doi:10.1002/pen.10846.
   Web of Science ®Google Scholar
• Heng, J. Y. Y., F. P. Duncan, F. Thielmann, T. Lampke, and A. Bismarck. 2007. Methods to determine surface energies of natural fibres: A review. Composite Interfaces 14 (7–9):581–604. doi:10.1163/156855407782106492.
   Web of Science ®Google Scholar
• John, M. J., and R. D. Anandjiwala. 2008. Recent developments in chemical modification and characterization of natural fiber-reinforced composites. Polymer Composites 29 (2):187–207. doi:10.1002/pc.20461.
   Web of Science ®Google Scholar
• Kevin, H., and B. John. 2007. Dynamic wettability properties of single wood pulp fibers and their relationship to absorbency. Wood and Fiber Science 20 (1):15.
   Google Scholar
• Kumar, R., V. Choudhary, S. Mishra, and I. Varma. 2008. Banana fiber-reinforced biodegradable soy protein composites. Frontiers of Chemistry in China 3 (3):243–50. doi:10.1007/s11458-008-0069-1.
   Google Scholar
• Le Troedec, M., D. Sedan, C. Peyratout, J. P. Bonnet, A. Smith, R. Guinebretiere, V. Gloaguen, and P. Krausz. 2008. Influence of various chemical treatments on the composition and structure of hemp fibres. Composites Part A: Applied Science and Manufacturing 39 (3):514–22. doi:10.1016/j.compositesa.2007.12.001.
   Web of Science ®Google Scholar
• Liu, Y., and H. Hong. 2008. X-ray diffraction study of bamboo fibers treated with NaOH. Fibers and Polymers 9 (6):735–39. doi:10.1007/s12221-008-0115-0.
   Web of Science ®Google Scholar
• Lu, T., M. Jiang, Z. Jiang, D. Hui, Z. Wang, and Z. Zhou. 2013. Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites. Composites Part B: Engineering 51:28–34. doi:10.1016/j.compositesb.2013.02.031.
   Web of Science ®Google Scholar
• Mahesh, T. N. 2014. Influence of surface treatments on glass fibers and their wetting behavior. In Interfacial phenomena in glass fiber composites., ed. North Carolina State University, 65–101. EEUU. PhD Thesis, North Carolina.
   Google Scholar
• Manimaran, P., P. Senthamaraikannan, M. R. Sanjay, M. K. Marichelvam, and M. Jawaid. 2018. Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications. Carbohydrate Polymers 181:650–58. doi:10.1016/j.carbpol.2017.11.099.
   PubMed Web of Science ®Google Scholar
• Meng, F.-D., Y. Yang-lun, Y.-M. Zhang, Y. Wen-ji, and J.-M. Gao. 2016. Surface chemical composition analysis of heat-treated bamboo. Applied Surface Science 371:383–90. doi:10.1016/j.apsusc.2016.03.015.
   Web of Science ®Google Scholar
• Monteiro, S. N., V. Calado, R. Rubén Jesus S, and F. M. Margem. 2012. Thermogravimetric behavior of natural fibers reinforced polymer composites—An overview. Materials Science and Engineering: A 557:17–28. doi:10.1016/j.msea.2012.05.109.
   Web of Science ®Google Scholar
• Mori, S., C. Tenazoa, S. Candiotti, E. Flores, and S. Charca. 2018. Assessment of ichu fibers extraction and their use as reinforcement in composite materials. Journal of Natural Fibers 1–16. doi:10.1080/15440478.2018.1527271.
   Web of Science ®Google Scholar
• Mori, S., E. Flores, and S. Charca. 2017. Ichu: New natural fibers for composites and its extraction methodology. 17th International Conference on Non-Convetional Materials and Technologies Merida, Mexico.
   Google Scholar
• Nicoleta, T., R. Ibbett, and K. C. Schuster. 2011. Overview on native cellulose and microcrystalline cellulose I structure studied by X-ray diffraction (WAXD): Comparison between measurement techniques. Lenzinger Berichte 89:14.
   Google Scholar
• Norul Izani, M. A., M. T. Paridah, U. M. K. Anwar, M. Y. Mohd Nor, and P. S. H’ng. 2013. Effects of fiber treatment on morphology, tensile and thermogravimetric analysis of oil palm empty fruit bunches fibers. Composites Part B: Engineering 45 (1):1251–57. doi:10.1016/j.compositesb.2012.07.027.
   Web of Science ®Google Scholar
• Owens, D. K., and R. C. Wendt. 1969. Estimation of the surface free energy of polymers. Journal of Applied Polymer Science 13 (8):1741–47. doi:10.1002/app.1969.070130815.
   Web of Science ®Google Scholar
• Park, S., J. O. Baker, M. E. Himmel, P. A. Parilla, and D. K. Johnson. 2010. Cellulose crystallinity index: Measurement techniques and their impact on interpreting cellulase performance. Biotechnology for Biofuels 3 (1):10. doi:10.1186/1754-6834-3-20.
   PubMed Web of Science ®Google Scholar
• Pickering, K. L., G. W. Beckermann, S. N. Alam, and N. J. Foreman. 2007. Optimising industrial hemp fibre for composites. Composites Part A: Applied Science and Manufacturing 38 (2):461–68. doi:10.1016/j.compositesa.2006.02.020.
   Web of Science ®Google Scholar
• Poletto, M., A. J. Zattera, M. M. C. Forte, and R. M. C. Santana. 2012. Thermal decomposition of wood: Influence of wood components and cellulose crystallite size. Bioresource Technology 109:148–53. doi:10.1016/j.biortech.2011.11.122.
   PubMed Web of Science ®Google Scholar
• Poletto, M., H. Ornaghi, and A. Zattera. 2014. Native cellulose: Structure, characterization and thermal properties. Materials 7 (9):6105. doi:10.3390/ma7096105.
   PubMed Web of Science ®Google Scholar
• Popescu, M.-C., C.-M. Popescu, G. Lisa, and Y. Sakata. 2011. Evaluation of morphological and chemical aspects of different wood species by spectroscopy and thermal methods. Journal of Molecular Structure 988 (1–3):65–72. doi:10.1016/j.molstruc.2010.12.004.
   Web of Science ®Google Scholar
• Pucci, M. F., M. C. Seghini, P.-J. Liotier, F. Sarasini, J. Tirilló, and S. Drapier. 2017. Surface characterisation and wetting properties of single basalt fibres. Composites Part B: Engineering 109:72–81. doi:10.1016/j.compositesb.2016.09.065.
   Web of Science ®Google Scholar
• Reddy, K., K. Obi, R. N. Reddy, J. Zhang, J. Zhang, and A. V. Rajulu. 2013. Effect of alkali treatment on the properties of century fiber. Journal of Natural Fibers 10 (3):282–96. doi:10.1080/15440478.2013.800812.
   Web of Science ®Google Scholar
• Roselló, J., M. Lourdes Soriano, J. L. Pilar Santamarina, J. M. Akasaki, and P. Jordi. 2017. Rice straw ash: A potential pozzolanic supplementary material for cementing systems. Industrial Crops and Products 103:39–50. doi:10.1016/j.indcrop.2017.03.030.
   Web of Science ®Google Scholar
• Rudall, P. J., and R. B. G. Kew. 2007. Anatomy of flowering plants an introduction to structure and development. 3rd ed. Cambridge UK: Cambridge University Press.
   Google Scholar
• Saha, P., S. Manna, S. R. Chowdhury, R. Sen, D. Roy, and B. Adhikari. 2010. Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment. Bioresource Technology 101 (9):3182–87. doi:10.1016/j.biortech.2009.12.010.
   PubMed Web of Science ®Google Scholar
• Sanjay, M., G. Arpitha, L. Naik, K. Gopalakrishna, and B. Yogesha. 2016. Applications of natural fibers and its composites: An overview. Natural Resources 7 (3):6. doi:10.4236/nr.2016.73011.
   Google Scholar
• Savastano, H., Jr, S. F. Santos, J. Fiorelli, and V. Agopyan. 2016. 19 - Sustainable use of vegetable fibres and particles in civil construction A2 - Khatib. In Sustainability of Construction Materials, ed. Jamal M, 477–520. 2nd ed. Boston, MA: Woodhead Publishing.
   Google Scholar
• Sawpan, M. A., K. L. Pickering, and A. Fernyhough. 2011. Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres. Composites Part A: Applied Science and Manufacturing 42 (8):888–95. doi:10.1016/j.compositesa.2011.03.008.
   Web of Science ®Google Scholar
• Segal, L., J. J. Creely, A. E. Martin, and C. M. Conrad. 1959. An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Textile Research Journal 29 (10):786–94. doi:10.1177/004051755902901003.
   Google Scholar
• Sever, K., M. Sarikanat, Y. Seki, G. Erkan, Ü. H. Erdoğan, and S. Erden. 2012. Surface treatments of jute fabric: The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites. Industrial Crops and Products 35 (1):22–30. doi:10.1016/j.indcrop.2011.05.020.
   Web of Science ®Google Scholar
• Son, H., C. Kim, W. K. Chong, and J.-S. Chou. 2011. Implementing sustainable development in the construction industry: Constructors’ perspectives in the US and Korea. Sustainable Development 19 (5):337–47. doi:10.1002/sd.442.
   Web of Science ®Google Scholar
• Tenazoa, C., S. Charca, M. Quintana, and E. Flores. 2017. Chemical characterization for the comparative study of peruvian natural fibers. 17th International Conference on Non-Convetional Materials and Technologies Merida, Mexico.
   Google Scholar
• Tran, L. Q. N., C. A. Fuentes, C. Dupont-Gillain, A. W. Van Vuure, and I. Verpoest. 2011. Wetting analysis and surface characterisation of coir fibres used as reinforcement for composites. Colloids and Surfaces A: Physicochemical and Engineering Aspects 377 (1):251–60. doi:10.1016/j.colsurfa.2011.01.023.
   Web of Science ®Google Scholar
• Tran, L. Q. N., C. A. Fuentes, C. Dupont-Gillain, A. W. Van Vuure, and I. Verpoest. 2013. Understanding the interfacial compatibility and adhesion of natural coir fibre thermoplastic composites. Composites Science and Technology 80:23–30. doi:10.1016/j.compscitech.2013.03.004.
   Web of Science ®Google Scholar
• Yan, L., N. Chouw, L. Huang, and B. Kasal. 2016. Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites. Construction and Building Materials 112:168–82. doi:10.1016/j.conbuildmat.2016.02.182.
   Web of Science ®Google Scholar
• Yanjun, X. 2010. Silane coupling agents used for natural fiber/polymer composites: A review. Composites Part A: Applied Science and Manufacturing 41 (7):14.
   Web of Science ®Google Scholar
• Zhang, H. N., J. Dhakal, and Z. Y. MacMullen. 2015. Capter 6: Testing and characterization of natural fiber-reinforced composites in natural. In Natural fiber composites, ed. R. D. S. G. Campilho, 175–98.
   Google Scholar