The Effect of Alkali Treatment on Chemical and Physical Properties of Ichu and Cabuya Fibers

References

• Abraham, Y., and R. Elbaum. 2013. Quantification of microfibril angle in secondary cell walls at subcellular resolution by means of polarized light microscopy. New Phytologist 197:1012–19. doi:10.1111/nph.12070.
   PubMed Web of Science ®Google Scholar
• Alegría, F. 2013. Inventory and sustainable use of grasslands in the area adjacent to the reservoirs of relavera de ocroyoc-community San Antonio de Rancas – Pasco. M.S. thesis, Pontifical Catholic University of Peru, Lima, Peru. “Inventario y uso sostenible de pastizales en la zona colindante a los depósitos de relavera de ocroyoc-comunidad San Antonio de Rancas – Pasco”
   Google Scholar
• Asim, M., M. Jawaid, K. Abdan, and M. Ridzwan. 2016. Effect of alkali and silane treatments on mechanical and fibre-matrix bond strength of kenaf and pineapple leaf fibres. Journal of Bionic Engineering 13 (3):426–35. doi:10.1016/S1672-6529(16)60315-3.
   Web of Science ®Google Scholar
• Badrinath, R., and T. Senthilvelan. 2014. Comparative investigation on mechanical properties of banana and sisal reinforced polymer based composites. Procedia Materials Science 5:2263–72. doi:10.1016/j.mspro.2014.07.444.
   Google Scholar
• Baiardo, M., G. Frisoni, M. Scandola, and A. Licciardello. 2002. Surface chemical modification of natural cellulose fibers. Journal of Applied Polymer Science 83:38–45. Dep. of Chemistry, Univ. of Bologna, Bologna, Italy. doi:10.1002/(ISSN)1097-4628.
   Web of Science ®Google Scholar
• Braga, E., C. Gomes, J. Pereira, D. Araújo, F. de Carvalho, A. Ries, R. Ramos, and L. Balbino. 2018. Effect of alkaline and hot water treatments on the structure and morphology of piassava fibers. Materials Research 21:2.
   Web of Science ®Google Scholar
• Cardelús, B., and T. Guijarro. 2012. Cápac Ñan, el gran camino inca, 98–100. Lima, Perú: Santillana S. A.
   Google Scholar
• Claramunt, J., L. J. Fernández-Carrasco, H. Ventura, and M. Ardanuy. 2016. Natural fiber nonwoven reinforced cement composites as sustainable materials for building envelopes. Construction and Building Materials 115 (15):230–39. doi:10.1016/j.conbuildmat.2016.04.044.
   Google Scholar
• Dittenber, D. B., and H. V. S. Gangarao. 2012. Critical review of recent publications on use of natural composites in infrastructure. Composites Part A: Applied Science and Manufacturing 43 (8):1419–29. doi:10.1016/j.compositesa.2011.11.019.
   Web of Science ®Google Scholar
• Elenga, R., P. Djemia, D. Tingaud, T. Chauveau, J. Maniongui, and G. Dirras. 2013. Effects of alkali treatment on the microstructure, composition, and properties of the raffia textilis fiber. Bioresources 8:2. doi:10.15376/biores.8.2.2934-2949.
   Web of Science ®Google Scholar
• Fan, M., and F. Fu. 2017. Advanced high strength natural fiber composites in construction, 66–68. Duxford, UK: Elsevier Ltd.
   Google Scholar
• Ferreira, S., F. De Andrade, P. Lopes, and R. Toledo. 2015. Effect of fiber treatments on the sisal fiber properties and fiber–Matrix bond in cement based systems. Construction and Building Materials 101:730–40. doi:10.1016/j.conbuildmat.2015.10.120.
   Web of Science ®Google Scholar
• Gassan, J., A. Chate, and A. K. Bledzki. 2001. Calculation of elastic properties of natural fibers. Journal of Material Sciences 36:3715–20. doi:10.1023/A:1017969615925.
   Web of Science ®Google Scholar
• Hashim, M. Y. 2017. The effect of alkali treatment under various conditions on physical properties of kenaf fiber. Journal of Physics: Conference Series 914 (1).
   Google Scholar
• Ikramullah, I., S. Rizal, S. Thalib, and S. Huzni. 2018. Hemicellulose and lignin removal on typha fiber by alkali treatment. IOP Conference Series: Materials Science and Engineering 352 (1).
   Google Scholar
• John, M., and T. Sabu. 2012. Natural polymers: volume 1: composites. First ed. Cambridge, UK: The Royal Society of Chemistry Publishing.
   Google Scholar
• Komuraiah, A., N. S. Kumar, and B. D. Prasad. 2014. Chemical composition of natural fibers and its influence on their mechanical properties. Mechanics of Composite Materials 50:3. doi:10.1007/s11029-014-9422-2.
   Web of Science ®Google Scholar
• Lakshumu, A., V. Jagadeesh, and R. Bahubalendruni. 2017. A review on chemical and physical properties of natural fiber reinforced composites. International Journal of Advanced Research in Engineering and Technology (IJARET) 8 (1):56–68.
   Google Scholar
• Machaka, M., H. Basha, H. A. Chakra, and A. Elkordi. 2014. Alkali treatment of fan palm natural fibers for use in fiber reinforced concrete. European Scientific Journal 10:12.
   Google Scholar
• Madsen, B., and E. K.Gamstedt. 2013. Wood versus plant fibers: Similarities and differences in composite applications. In Advances in materials science and engineering(2). Editor: Dachamir Hotza.
   Google Scholar
• Morán, J., V. A. Alvarez, V. P. Cyras, and A. Vázquez. 2008. Extraction of cellulose and preparation of nanocellulose from sisal fibers. Cellulose 15 (1):149–59. doi:10.1007/s10570-007-9145-9.
   Web of Science ®Google Scholar
• Mori, S., C. Tenazoa, S. Candiotti, E. Flores, and S. Charca. 2018. Assessment of Ichu fibers extraction and their use as reinforcement in composite materials. Journal of Natural Fibers 1–16. doi:10.1080/15440478.2018.1527271.
   Web of Science ®Google Scholar
• Mouhoubi, S., M. E. H. Bourahli, H. Osmani, and S. Abdeslam. 2016. Effect of Alkali Treatment on Alfa fibers Behavior. Journal of Natural Fibers 14 (2):239–49. doi:10.1080/15440478.2016.1193088.
   Web of Science ®Google Scholar
• Naveen, E., N. Venkatachalam, and N. Maheswaran. 2015. Alkali chemical treatment on the surface of natural fiber. International Journal of Innovative Research in Science, Engineering and Technology 4:4.
   Google Scholar
• Omrani, E., P. L. Menezes, and P. K. Rohatgi. 2015. State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Engineering Science Technology, an International Journal 19 (2):717–36. doi:10.1016/j.jestch.2015.10.007.
   Google Scholar
• Oushabi, A., S. Sair, F. O. Hassani, Y. Abboud, O. Tanane, and A. El Bouari. 2017. The effect of alkali treatment on mechanical, morphological and thermal properties of date palm fibers (DPFs): Study of the interface of DPF-Polyurethane composite. South African Journal of Chemical Engineering 23:116–23. doi:10.1016/j.sajce.2017.04.005.
   Google Scholar
• Peter, G. F., D. M. Benton, and K. Bennett. 2003. A simple, direct method for measurement of microfibril angle in single fibers using differential interference contrast microscopy. Journal of Pulp and Paper Science 29:8.
   Google Scholar
• Pickering, K. L., M. G. Efendy, and T. M. Le. 2016. A review of recent developments in natural fiber composites and their mechanical performance. Composites Part A: Applied Science and Manufacturing 83:98–112. doi:10.1016/j.compositesa.2015.08.038.
   Web of Science ®Google Scholar
• Pollard, A. 2011. Costume and history in highland ecuador. First ed. Austin, Texas, United States: University of Texas Press.
   Google Scholar
• Ramadevi, P., S. Dhanalakshmi, V. Srinivasa, and B. Basavaraju. 2012. Effect of alkali treatment on water absorption of single cellulosic abaca fiber. BioResources 7:3.
   Web of Science ®Google Scholar
• Rayirath, P., S. Avramidis, and S. Mansfield. 2008. The effect of wood drying on crystallinity and microfibril angle in black spruce (Picea mariana). Journal of Wood Chemistry and Technology 28 (3):167–79. doi:10.1080/02773810802346950.
   Web of Science ®Google Scholar
• Reddy, K. O., K. N. Reddy, J. Zhang, and A. V. Rajulu. 2013. Effect of alkali treatment on the properties of century fiber. Journal of Natural Fibers 10:3. doi:10.1080/15440478.2013.800812.
   Web of Science ®Google Scholar
• Santos, S. F., G. H. D. Tonoli, J. E. B. Mejia, J. Fiorelli, and H. Savastano. 2015. Non- conventional cement-based composites reinforced with vegetable fibers: A review of strategies to improve durability. Materiales de Construcción 65:317.
   Web of Science ®Google Scholar
• Saraiva, J. P. 2010. Procedures for lignocellulosic analysis. 1st., 11–42. Brasil: Campina grande. Embrapa Algodão, . “Procedimentos para Análise Lignocelulósica”.
   Google Scholar
• Setina, J., A. Gabrene, and I. Juhnevica. 2013. Effect of pozzolanic additives on structure and chemical durability of concrete. 11th International Conference on Modern Building Materials, Structures and Techniques, Procedia Engineering 57:1005–12.
   Google Scholar
• Singha, A. S., and A. K. Rana. 2012. Effect of silane treatment of physicochemical properties of lignocellulosic C. indica fiber. Journal of Applied Polymer Science 124 (3):2474–83. doi:10.1002/app.35256.
   Web of Science ®Google Scholar
• Srinivasa, C. V., and K. N. Bharath. 2013. Effect of alkali treatment on impact behavior of areca fibers reinforced polymer composites. International Journal of Materials Engineering 7:4.
   Google Scholar
• Tabet, T. A., and F. A. Aziz. 2013. Cellulose microfibril angle in wood and its dynamic mechanical significance. In Cellulose-fundamental aspects. Chapter 5: 113-143. INTECH - Open Science, Open Minds. Editors: Theo Van De Ven and Louis Godbout.
   Google Scholar
• U.S. Department of energy genomic science program, image gallery. Accessed December 05, 2018. http://genomics.energy.gov
   Google Scholar
• Zannen, S., L. Ghali, M. Halimi, and M. B. Hssen. 2014. Effect of chemical extraction on physicochemical and mechanical properties of doum palm fibers. Advances in Materials Physics and Chemistry 4:203–16. doi:10.4236/ampc.2014.410024.
   Google Scholar