Mass Transport and Thermal Conductivity Properties of Flax Shives for Use in Construction Industry

References

• Al-Mohamadawi, A., K. Benhabib, R. M. Dheilly, and A. Goullieux. 2016. Influence of lignocellulosic aggregate coating with paraffin wax on flax shive and cement-shive composite properties. Construction and Building Materials 102:94–104. doi:10.1016/j.conbuildmat.2015.10.190.
   Web of Science ®Google Scholar
• Arnaud, L., and E. Gourlay. 2012. Experimental study of parameters influencing mechanical properties of hemp concretes. Construction and Building Materials 28 (1):50–56. doi:10.1016/j.conbuildmat.2011.07.052.
   Web of Science ®Google Scholar
• Balčiūnas, G., S. Vėjelis, L. Lekūnaitė, and A. Kremensas. 2016. Assessment of structure influence on thermal conductivity of hemp shives composite. Environmental Engineering and Management Journal 15 (3):699–705. doi:10.30638/eemj.2016.075.
   Web of Science ®Google Scholar
• Barnat-Hunek, D., P. Smarzewski, and P. Brzyski. 2017. Properties of hemp–Flax composites for use in the building industry. Journal of Natural Fibers 14 (3):410–25. doi:10.1080/15440478.2016.1212764.
   Web of Science ®Google Scholar
• Brzyski, P., D. Barnat-Hunek, Z. Suchorab, and G. Łagód. 2017. Composite materials based on hemp and flax for low-energy buildings. Materials 10 (510). doi: 10.3390/ma10050510.
   PubMedGoogle Scholar
• Brzyski, P., and M. Widomski. 2017. The influence of partial replacement of hemp shives by expanded perlite on physical properties of hemp-lime composite. AIP Conference Proceedings 1866, 040006, Terchová, Slovakia. doi:10.1063/1.4994486.
   Google Scholar
• Cetiner, I., and A. D. Shea. 2018. Wood waste as an alternative thermal insulation for buildings. Energy and Buildings 168:374–84. doi:10.1016/j.enbuild.2018.03.019.
   Web of Science ®Google Scholar
• Dubois, V., A. Leblanc, O. Carpentier, G. Alhaik, and E. Wirquin. 2018. Performances of flax shive-based lightweight composites with rapid hardening. Construction and Building Materials 165:17–27. doi:10.1016/j.conbuildmat.2017.12.239.
   Web of Science ®Google Scholar
• Dupré, B. 2005. Contribution à la valorisation des coproduits du lin: étude del’impact du vécu et de la variabilité génétique sur les propriétés des compositesélaborés (Contribution to flax by-products valorization). PhD diss., Université de PicardieJules Verne, France.
   Google Scholar
• Fengel, D., and G. Wegener. 1989. Wood Chemistry, Ultrastructure, Reactions. USA, New York: Walter de Gruyter Press.
   Google Scholar
• Geving, S., E. Lunde, and J. Holme. 2015. Laboratory investigations of moisture conditions in wood frame walls withwood fiber insulation. Energy Procedia 78:1455–60. doi:10.1016/j.egypro.2015.11.170.
   Google Scholar
• Grudzińska, M., and P. Brzyski. 2019. The occurrence of thermal bridges in hemp-lime construction junctions. Periodica Polytechnica – Civil Engineering 63 (2):377–87. doi:10.3311/PPci.13377.
   Web of Science ®Google Scholar
• Hurtado, P. L., A. Rouilly, V. Vandenbossche, and C. Raynaud. 2016. A review on the properties of cellulose fibre insulation. Building and Environment 96:170–77. doi:10.1016/j.buildenv.2015.09.031.
   Web of Science ®Google Scholar
• Jagannadh, J. N., and F. Kolla. 1997. An update – Canadian oilseed flax straw utilisation. In: Proceeding of the Tappi Pulping Conference. San Francisco, CA Book 2, p. 811.
   Google Scholar
• Khazma, M., A. Goullieux, R. M. Dheilly, and M. Quéneudec. 2012. Coating of a lignocellulosic aggregate with pectin/polyethylenimin mixtures: Effects on flax shive and cement-shive composite properties. Cement & Concrete Composites 34:223–30. doi:10.1016/j.cemconcomp.2011.07.008.
   Web of Science ®Google Scholar
• Khazma, M., A. Goullieux, R. M. Dheilly, A. Rougier, and M. Quéneudec. 2014. Optimization of flax shive-cementitious composites: Impact ofdifferent aggregate treatments using linseed oil. Industrial Crops and Products 61:442–52. doi:10.1016/j.indcrop.2014.07.041.
   Web of Science ®Google Scholar
• Korjenic, A., J. Zach, and J. Hroudová. 2016. The use of insulating materials based on natural fibers in combination with plant facades in building construction. Energy and Buildings 116:45–58. doi:10.1016/j.enbuild.2015.12.037.
   Web of Science ®Google Scholar
• Kosiński, P., P. Brzyski, A. Szewczyk, and W. Motacki. 2018. Thermal properties of raw hemp fiber as a loose-fill insulation material. Journal of Natural Fibers 15 (5):717–30. doi:10.1080/15440478.2017.1361371.
   Web of Science ®Google Scholar
• Kosiński, P., and R. Wójcik. 2017. An impact of air permeability on heat transfer through partitions insulated with loose fiber materials. Applied Mechanics and Materials 861:190–97. doi:10.4028/www.scientific.net/AMM.861.190.
   Google Scholar
• Kozłowski, R. 2006. Poradnik plantatora lnu włóknistego [Guide to the grower of fiber flax]. Poland: Institute of Natural Fibres and Medicinal Plants in Poznan [In Polish.
   Google Scholar
• Papadopoulos, A. N., and J. R. B. Hague. 2003. The potential for using flax (Linum usitatissimum L.) shiv as a lignocellulosic raw material for particleboard. Industrial Crops and Products 17 (2):143–47. doi:10.1016/S0926-6690(02)00094-8.
   Web of Science ®Google Scholar
• Pavlik, Z., L. Fiala, M. Jerman, E. Vejmelková, M. Pavlíková, M. Keppert, and R. Černý. 2014. Theoretical and experimental analysis of moisture-dependent thermal conductivity of lightweight ceramic bricks. International Journal of Thermophysics 35 (9):1912–21. doi:10.1007/s10765-012-1369-8.
   Web of Science ®Google Scholar
• Pavlik, Z., J. Zumar, I. Medved, and R. Cerny. 2012. Water vapor adsorption in porous building materials: Experimental measurement and theoretical analysis. Transport in Porous Media 91 (3):939–54. doi:10.1007/s11242-011-9884-9.
   Web of Science ®Google Scholar
• Popis, E., K. Ratusz, M. Przybysz, K. Krygier, A. Sakowska, and M. Konarska. 2015. Światowa oraz polska produkcja lnu oleistego i oleju lnianego [World and Polish production of linseed and linseed]. Zeszyty Naukowe Szkoly Glównej Gospodarstwa Wiejskiego W Warszawie, Problemy Rolnictwa Swiatowego 15, XXX, 2:106–16. [In Polish].
   Google Scholar
• Rahim, M., O. Douzane, A. D. Tran Le, G. Promis, B. Laidoudi, A. Crigny, B. Dupre, and T. Langlet. 2015. Characterization of flax lime and hemp lime concretes: Hygricproperties and moisture buffer capacity. Energy and Buildings 88:91–99. doi:10.1016/j.enbuild.2014.11.043.
   Web of Science ®Google Scholar
• Rentsen, B. 2010. Characterization of flax shives and factors affecting the quality of fuel pellets from flax shives. MSc. diss., Department of Agricultural and Bioresource Engineering University of Saskatchewan Saskatoon.
   Google Scholar
• Sam-Brew, S., and G. D. Smith. 2015. Flax and Hemp fiber-reinforced particleboard. Industrial Crops and Products 77:940–48. doi:10.1016/j.indcrop.2015.09.079.
   Web of Science ®Google Scholar
• Stevulova, N., L. Kidalova, J. Cigasova, J. Junak, A. Sicakova, and E. Terpakova. 2013. Lightweight composites containing hemp hurds. Procedia Engineering 65:69–74. doi:10.1016/j.proeng.2013.09.013.
   Google Scholar
• Valverde, I. C., L. H. Castilla, D. F. Nuñez, E. Rodriguez-Senín, and R. de la Mano Ferreira. 2013. Development of new insulation panels based on textile recycled fibers. Waste Biomass Valoriz 4:139–46. doi:10.1007/s12649-012-9124-8.
   Web of Science ®Google Scholar
• Walker, R., and S. Pavía. 2014. Moisture transfer and thermal properties of hemp–Lime concretes. Construction and Building Materials 64:270–76. doi:10.1016/j.conbuildmat.2014.04.081.
   Web of Science ®Google Scholar
• Zając, T., A. Oleksy, B. Kulig, and A. Klimek. 2010. Uwarunkowania plonowania formy oleistej lnu zwyczajnego (Linum ussititassimum L.) oraz jej znaczenie żywieniowe i lecznicze [Conditions of yielding of the oily form of flax (Linum ussititassimum L.) and its nutritional and healing importance]. Acta Scientarum Polonorum, Agricultura 9 (2):47–63. [In Polish].
   Google Scholar