Advanced search
Publication Cover
Journal of Natural Fibers Volume 18, 2021 - Issue 8
Submit an article Journal homepage
157
Views
5
CrossRef citations to date
0
Altmetric
Research Article

Tailoring the Mechanical Properties of Jute Woven/Cement Composite for Innovation in the Architectural Constructions

Magdi El MessiryTextile Department, Faculty of Engineering, Alexandria University, Alexandria, Egypt
&
Nermin FadelTextile Department, Faculty of Engineering, Alexandria University, Alexandria, EgyptCorrespondence[email protected]
Pages 1181-1193 | Published online: 05 Dec 2019

References

  • Basudam, A., B. Subhasish, R. Majumder, R. Sen, B. Kumar, K. Prasad, S. Chakraborty, and A. Roy. 2011. Development of jute fiber reinforced cement concrete composites.Project No: JMDC/JTM/MM-IV/7.1/2008, Dated: 31.3.2008. Materials Science Centre Indian Institute of Technology, India.
  • Biswas, S., Q. Ahsan, A. Cenna, M. Hasan, and A. Hassan. 2013. Physical and mechanical properties of jute, bamboo and coir natural fiber. Fibers and Polymers 14 (10):1762–67. doi:10.1007/s12221-013-1762-3.
  • Chattopadhyay, D. P. 1998. Introduction, chemistry and preparatory processes of jute. Colourage 45 (5):22–33.
  • Ci, L., and J. Bai. 2006. The reinforcement role of carbon nanotubes in epoxy composites with different matrix stiffness. Composites Science and Technology 66 (3–4):599–603. doi:10.1016/j.compscitech.2005.05.020.
  • Dry, C. 1996. Procedures developed for self-repair of polymer matrix composite materials. Composite Structures 35 (3):263–69. doi:10.1016/0263-8223(96)00033-5.
  • El Messiry, M., A. El Ouffy, and M. Issa. 2015. Microcellulose particles for surface modification to enhance moisture management properties of polyester, and polyester/cotton blend fabrics. Alexandria Engineering Journal 54 (2):127–40. doi:10.1016/j.aej.2015.03.001.
  • El-Messiry, M., S. El-Tarfawy, and R. El Deeb. 2017. Enhanced impact properties of cementitious composites reinforced with pultruded flax/polymeric matrix fabric. Alexandria Engineering Journal 56 (3):297–307. doi:10.1016/j.aej.2017.03.032.
  • Hai, N., B. Kim, and S. Lee. 2009. Effect of NaOH treatments on jute and coir fiber PP composites. Advanced Composite Materials 18 (3):197–208. doi:10.1163/156855109X428754.
  • Lee, M. 1992. Handbook of composite reinforcements. California, USA: John Wiley & Sons.
  • Mansur, M., and M. Aziz. 1982. A study of jute fibre reinforced cement composites. International Journal of Cement Composites and Lightweight Concrete 4 (2):75–82. doi:10.1016/0262-5075(82)90011-2.
  • Modibbo, U., B. Aliyu, and I. I. Nkafamiya. 2009. The effect of mercerization media on the physical properties of local plant bast fibres. International Journal of Physical Sciences 4 (11):698–704.
  • Pan, N., A. Day, and K. Mahalanabis. 1999. Chemical composition of jute and its estimation. Man Made Textiles in India 42 (11):467–73.
  • Peponi, L., J. Biagiotti, K. Luigi, M. Jose, and I. Mondragòn. 2008. Statistical analysis of the mechanical properties of natural fibers and their composite materials. I. Natural fibers. Polymer Composites 29 (3):313–20. doi:10.1002/(ISSN)1548-0569.
  • Pickering, K. 2008. Properties and performance of natural-fibre composites. Florida, USA: CRC Press.
  • Rodríguez, S., and A. Vazquez (2006). Alkali treatment of jute fabrics: Influence on the processing conditions and the mechanical properties of their composites. Paper presented at the The 8th International Conference on Flow Processes in Composite Materials (FPCM8), Douai, France.
  • Satyanarayana, K., K. Sukumaran, P. Mukherjee, C. Pavithran, and S. Pillai. 1990. Natural fibre-polymer composites. Cement and Concrete Composites 12 (2):117–36. doi:10.1016/0958-9465(90)90049-4.
  • Saville, B. 1999. Physical testing of textiles. Cambridge, England:Woodhead Publishing.
  • Stankovich,S.,D. Dikin,H. B. Dommett, K. M. Kohlhaas, J. Zimney, E. A. Stach, D. Piner, S. T. Nguyen, and R. S. Ruoff. 2006. Graphene-based composite materials. nature. 442(7100):282. doi:10.1038/nature04969.
  • Sutharson, B., M. Rajendran, S. R.Devadasan, and B. Selvam. 2012. Effect of chemical treatments on mechanical properties of jute fiber hybrid composite laminates. ARPN Journal of Engineering and Applied Sciences 7 (6):760–65.
  • Vinson, R., and R. Sierakowski. 2006. The behavior of structures composed of composite materials, Vol. 105. Springer Science & Business Media. Netherland: Springer.
  • Wang, W., Z. Cai, and J. Yu. 2008. Study on the chemical modification process of jute fiber. Journal of Engineered Fibers and Fabrics 3 (2):1–11. doi:10.1177/155892500800300203.
  • Wu, J., C. Geng, and H. Guo. 2011. Characterization of natural bamboo fibers treated with sodium hydroxide. The Fiber Society conference 2011 (23–25 May), Hong kong.
  • Zhou, M., K. Yeung, and C. Yuen. 2002. Effect of NaOH Mercerization on the crosslinking of Ramie Yarn using 1,2,3,4-Butanetetracarboxylic acid. Textile Research Journal 72.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.