351
Views
5
CrossRef citations to date
0
Altmetric
Research Article

End Milling of Banana Stem Fiber and Polyurethane Derived from Castor Oil Composite

, , , &

References

  • Arauco - Technical specifications sheet. https://www.arauco.cl/brasil/wpcontent/uploads/sites/17/2018/01/ARAUCO-TRUPAN-1.pdf
  • ASTM D790-15, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM International, West Conshohocken, PA, 2015, https://www.astm.org
  • Azmi, H., C. H. C. Haron, J. A. Ghani, Y. M. Suhail, A. B. Sanuddin, and J. H. Song. 2016. Study on machinability effect of surface roughness in milling kenaf fiber-reinforced plastic composite using response surface methodology. Journal of Engineering and Applies Sciences 11:4761–66.
  • Babu, G. D., K. S. Babu, and B. U. Gowd. 2013. Effect of machining parameters on milled natural fiber-reinforced plastic composites. Journal of Advanced Mechanical Engineering 1:1–12.
  • Babu, J., T. Sunny, N. A. Paul, K. P. Mohan, J. Philip, and J. P. Davim. 2016. Assessment of delamination in composite materials: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230 (11):1990–2003. doi:10.1177/0954405415619343.
  • Brindha, R., C. K. Narayana, V. Vijayalakshmi, and R. P. Nachane. 2019. Effect of different retting processes on yield and quality of banana pseudostem fiber. Journal of Natural Fibers 16 (1):58–67. doi:10.1080/15440478.2017.1401505.
  • Cangemi, J. M., A. M. Santos, S. Claro Neto, and G. O. Chierice. 2008. Biodegradation of polyurethane derived from castor oil. Polímeros 18 (3):201–06. doi:10.1590/S0104-14282008000300004.
  • Çelik, Y. H., E. Kilickap, and A. İ. Kilickap. 2019. An experimental study on milling of natural fiber (jute)-reinforced polymer composites. Journal Of Composite Materials 0021998319826373 53 (22):3127–3137. doi:10.1177/0021998319826373.
  • Chandramohan, D., and K. Marimuthu. 2011. Drilling of natural fiber particle reinforced polymer composite material. International Journal of Advanced Engineering Research and Studies 1 (1):134–45.
  • Chegdani, F., S. Mezghani, and M. El Mansori. 2015b. Experimental study of coated tools effects in dry cutting of natural fiber-reinforced plastics. Surface and Coatings Technology 284:264–72. doi:10.1016/j.surfcoat.2015.06.083.
  • Chegdani, F., S. Mezghani, M. El Mansori, and A. Mkaddem. 2015a. Fiber type effect on tribological behavior when cutting natural fiber-reinforced plastics. Wear 332:772–79. doi:10.1016/j.wear.2014.12.039.
  • Davim, J. P., P. Reis, and C. C. Antonio. 2004. A study on milling of glass fiber-reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA). Composite Structures 64 (3–4):493–500. doi:10.1016/j.compstruct.2003.09.054.
  • Deus, P. R., M. C. Alves, F. H. Vieira, and L. R. Bilesky. 2018. Analysis of the cutting parameters in front milling for medium density fiberboard. BioResources 13 (2):3404–10. doi:10.15376/biores.13.2.3404-3410.
  • El-Meligy, M. G., S. H. Mohamed, and R. M. Mahani. 2010. Study mechanical, swelling and dielectric properties of prehydrolysed banana fiber–Waste polyurethane foam composites. Carbohydrate Polymers 80 (2):366–72. doi:10.1016/j.carbpol.2009.11.034.
  • EN317. 2002. Determination of swelling in thickness after immersion in water. CEN – European Committee for Standarization.
  • Kuzu, A. T., and M. Bakkal. 2016. The effect of cutting parameters and tool geometry on machinability of cotton-fiber reinforced polymer composites: Cutting forces, burr formation and chip morphology. Journal of Industrial Textiles 45 (6):1364–82. doi:10.1177/1528083714560253.
  • Merlini, C., V. Soldi, and G. M. O. Barra. 2011. Influence of fiber surface treatment and length on physic-chemical properties of short random banana fiber-reinforced castor oil polyurethane composites. Polymer Testing 30:833–40. doi:10.1016/j.polymertesting.2011.08.008.
  • Mohd Zurayyen, A. M., and J. J. Mohamad. 2017. Effect of machining parameters on delamination during milled banana fiber-reinforced polyester composites. Journal of Engineering and Science Research 1:9–13.
  • Nassar, M. M. A., R. Arunachalan, and K. I. Alzebdeh. 2017. Machinability of natural fiber-reinforced composites: A review. The International Journal of Advanced Manufacturing Technology 88 (9–12):2985–3004. doi:10.1007/s00170-016-9010-9.
  • Piekarski, C. M., A. C. D. Francisco, L. M. D. Luz, T. H. D. P. Alvarenga, and J. V. M. Bittencourt. 2014. Environmental profile analysis of MDF panels production: Study in a brazilian technological condition. Cerne 20 (3):409–18. doi:10.1590/01047760201420031619.
  • Protzek, G. R., W. L. Magalhães, S. Claro Neto, and E. Azevedo 2016. Evaluation of mechanical properties of composite of pinhão with polyrethane derived from castor oil. In proceedings of the: BrazilianConference on Composte Materials - BCCM3, 2016, Gramado. Brazil: UFRGS.
  • Satyanarayana, K. G., J. L. Guimarães, and F. Wypych. 2007. Studies on lignocellulosic fibers of Brazil. Part I: Source, production, morphology, properties and applications. Composites Part A: Applied Science and Manufacturing 38 (7):1694–709. doi:10.1016/j.compositesa.2007.02.006.
  • Sheikh‐Ahmad, J. Y., and J. P. Davim. 2011. Machining of polymer composites. Eds. Luigi Nicolais (Editor), Assunta Borzacchiello (Editor), Stuart M. Lee (Founding Editor), 1–10. Lee: In Wiley encyclopedia of composites.
  • Venkateshwaran, N., A. E. Perumal, and D. Arunsundaranayagam. 2013. Fiber surface treatment and its effect on mechanical and visco-elastic behaviour of banana/epoxy composite. Materials & Design 47:151–59. doi:10.1016/j.matdes.2012.12.001.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.