Advanced search
Publication Cover
Journal of Natural Fibers Volume 18, 2021 - Issue 11
Submit an article Journal homepage
203
Views
23
CrossRef citations to date
0
Altmetric
Research Article

Influence of Natural Filler on Mechanical Properties of Hemp/Kevlar Hybrid Green Composite and Analysis of Change in Material Behavior Using Acoustic Emission

S. P. Jania Department of Mechanical engineering, Marri Laxman Reddy Institute of Technology and Management, Hyderabad, IndiaCorrespondence[email protected]
,
A. Senthil Kumarb Department of Mechanical Engineering, Sethu Institute of Technology, Virudhunagar, India
,
M. Adam Khanc International Research Centre (IRC), Kalasalingam University, Krishnankoil, IndiaORCID Iconhttps://orcid.org/0000-0003-4014-9611
ORCID Icon,
S. Sajithd Department of Aerospace Engineering, Madras Institute of Technology, Chennai, India
&
A. Saravanane Department of Mechanical Engineering, Ponjesly College of Engineering, Nagercoil, India
Pages 1580-1591 | Published online: 20 Nov 2019

References

  • Arumugam, V., S. Sajith, and A. Joseph Stanley. 2011. Acoustic emission characterization of failure modes in GFRP laminates under mode I delamination. Journal of Nondestructive Evaluation 30 (3):213–19. doi:10.1007/s10921-011-0109-5.
  • Bachtiar, D., S. M. Sapuan, and M. M. Hamdan. 2008. The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites. Materials and Design 29 (7):1285–90. doi:10.1016/j.matdes.2007.09.006.
  • Bhoopathi, R., M. Ramesh, and C. Deepa. 2014. Fabrication and property evaluation of banana-hemp-glass fiberReinforced composites. Procedia Engineering 97:2032–41. doi:10.1016/j.proeng.2014.12.446.
  • Fombuena, V., L. Bernardi, O. Fenollar, T. Boronat, and R. Balart. 2014. Characterization of green composites from bio based epoxy matrices and bio-fillers derived from seashell wastes. Materials and Design 57:168–74. doi:10.1016/j.matdes.2013.12.032.
  • Herrera-Franco, P., and A. Valadez-Gonzalez. 2005. A study of the mechanical properties of short natural-fiber reinforced composites. Composites Part B 36 (8):597–608. doi:10.1016/j.compositesb.2005.04.001.
  • Islam, M. S., K. L. Pickering, and N. J. Foreman. 2010. Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites. Composites: Part A 41:596–603. doi:10.1016/j.compositesa.2010.01.006.
  • Joshi, S. V., L. T. Drzal, Mohanty, A. K., and S. Arora. 2004. Are natural fiber composites environmentally superior to glass fiber reinforced composites? Composites: Part A 35:371–76. doi:10.1016/j.compositesa.2003.09.016.
  • Kumar, R., S. Obrai, and A. Sharma. 2011. Chemical modifications of natural fiber for composite material. Pelagia Research Library 2 (4):219–28.
  • Manimaran, P., A. Shadrach Jeyasekaran, R. Purohit, and G. Pitchayya Pillai. 2018. An experimental and numerical investigation on the mechanical properties of addition of wood flour fillers in red banana peduncle fiber reinforced polyester composites. Journal of Natural Fibers 1–19. doi:10.1080/15440478.2018.1558148.
  • Mülhaupt, R. 2013. Green polymer chemistry and bio-based plastics: Dreams and reality. Macromolecular Chemistry and Physics 214:159–74. doi:10.1002/macp.201200439.
  • Omar Faruk, K., B. Andrzej, H.-P. Fink, and M. Sain. 2012. Bio-composites reinforced with natural fibers: 2000–2010. Progress in Polymer Science 37 (11):1552–96. doi:10.1016/j.progpolymsci.2012.04.003.
  • Sajith, S. 2019. Investigation on effect of chemical composition of bio-fillers on filler/matrix interaction and properties of particle reinforced composites using FTIR. Composites Part B 166:21–30. doi:10.1016/j.compositesb.2018.11.141.
  • Sajith, S., V. Arumugam, and H. N. Dhakal. 2017. Comparison on mechanical properties of lingo cellulosic flour epoxy composites prepared by using coconut shell, rice husk and teakwood as fillers. Polymer Testing 58:60–69. doi:10.1016/j.polymertesting.2016.12.015.
  • Saravanana, K., and C. Prakash. 2018. Effect of processing conditions on flexural strength properties of chicken feather fibre (CFF) and its hybrid composites with polypropylene resin. Journal of Natural Fibers 1–12. doi:10.1080/15440478.2018.1539941.
  • Singh, S., D. Deepak, L. Aggarwal, and Gupta, V. K. 2014. Tensile and flexural behavior of hemp fiber reinforced virgin-recycled HDPE matrix composites. Procedia Materials Science 6:1696–702. doi:10.1016/j.mspro.2014.07.155.
  • Yao, Z., M. Xia, L. Ge, T. Chen, H. Li, Y. Ye, and H. Zheng. 2014. Mechanical and thermal properties of polypropylene (PP) composites filled with CaCO3 and shell waste derived bio-fillers. Fibers and Polymers 15 (6):1278–87. doi:10.1007/s12221-014-1278-5.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.