Compressive and Interlaminar Shear Strength Properties of Biaxial Fibreglass Laminates Hybridized with Jute Fibre Produced by Vacuum Infusion

References

• Ahmed, K. S., and S. Vijayarangan. 2008. Tensile, flexural, and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites. Journal of Materials Processing Technology 207:330–35. doi:10.1016/j.jmatprotec.2008.06.038.
   Web of Science ®Google Scholar
• Almeida, H. S. A., Jr., C. C. Angrizani, E. C. Botelho, and S. C. Amico. 2015. Effect of fiber orientation on the shear behavior of glass fiber epoxy composites. Material and Design 65:789–95. doi:10.1016/j.matdes.2014.10.003.
   Web of Science ®Google Scholar
• Almeida, J. H. S., Jr., S. C. Aamico, E. C. Botelho, and F. D. R. Amado. 2013. Hybridization effect on the mechanical properties of curaua/glass fiber composites. Composites: Part B: Engineering 55:492–97. doi:10.1016/j.compositesb.2013.07.014.
   Web of Science ®Google Scholar
• Amico, S., C. C. Angrizani, and M. Drummond. 2016. Influence of the stacking sequence on the mechanical properties of glass/sisal hybrid composites. Journal of Reinforced Plastics and Composites 29:179–89. doi:10.1590/1980-5373-MR-2016-0058.
   Google Scholar
• Angrizani, C. C., M. O. Cioffi, A. J. Zatttera, and S. C. Amico. 2014. Analysis of curaua/glass hybrid interlayer laminates. Journal of Reinforced Plastics 33:472–78. doi:10.1177/0731684413517519.
   Google Scholar
• Bouguessir, H., E. Harkati, and R. Mansour. 2016. Hybrid jute/glass reinforced laminate mechanical properties. Journal of Civil & Environmental Engineering 6:1–5. doi:10.4172/2165-784X.1000242.
   Google Scholar
• Braga, L. A., and P. A. A. Magalhães Jr. 2015. Analysis of the mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites. Materials Science and Engineering C 56:269–73. doi:10.1016/j.msec.2015.06.031.
   PubMed Web of Science ®Google Scholar
• Coban, O., M. O. Bora, T. Sinmazcelik, and V. Guany. 2010. Effect of fiber orientation on viscoelastic properties of polymer matrix composites subjected to thermal cycles. Composites Polymer 3:411–16. doi:10.1002/pc.20818.
   Google Scholar
• Corbère-Nicollier, T., L. B. Gfeller, L. Lundquist, Y. Leterrier, J. –. A. E. Mansor, and O. Jolliet. 2001. Life cycle assessment of biofiber replacing glass fibres as reinforcement in plastics. Resources, Conservation and Recycling 33:267–87.
   Web of Science ®Google Scholar
• Creemers, R. J. C., 2017. Interlaminar shear strength criteria for composites: An assessment by means of statistical analysis. 2010. Accessed January 09, 2017. https://reports.nlr.nl/xmlui/bitstream/handle/10921/232/TP-2009-262.pdf?sequence=1.
   Google Scholar
• Cui, H., D. Thomson, A. Pellegrino, J. Wiegand, and N. Petrinic. 2016. Effect of strain rate and fibre rotation on the in-plane shear response of ±45 laminates in tension and compression tests. Composites Science and Technology 135:106–15. doi:10.1016/j.compscitech.2016.09.016.
   Web of Science ®Google Scholar
• Elhajjar, R. F., and S. S. Sham. 2014. Compression testing of continuous fiber reinforced polymer composites with out-of-plane fiber waviness and circular notches. Polymer Testing 35:45–55. doi:10.1016/j.polymertesting.2014.02.004.
   Web of Science ®Google Scholar
• Grohaman, J. G. S. 2015. Assessing interlaminar shear stress-strain curves in tape composites based on the flat-plate torsion method. Dissertation of Master of Science in Aerospace Engineering, University of Texas.
   Google Scholar
• Gujjala, R., S. Ojha, S. K. Acharya, and S. K. Pal. 2014. Mechanical properties of woven jute-glass hybrid –Reinforced epoxy composites. Journal of Composites Materials 48:3445–55. doi:10.1177/0021998313501924.
   Google Scholar
• Hossain, M. R., M. A. Islam, A. V. Vuurea, and I. Verpoest. 2015. Tensile behavior of environment friendly jute epoxy laminated composite. Procedia Engineering 56:782–88. doi:10.1016/j.proeng.2013.03.196.
   Google Scholar
• Jose, J. G., E. Sivakumar, J. T. Philip, K. Mahesh, and B. Kuriachen. 2019. Tensile and flexural property analyses of glass/carbon embedded hybrid natural fibre composites. Advances in Computational Methods in Manufacturing 773–82. doi:10.1007/978-981-32-9072-3_64.
   Google Scholar
• Kishore, R. H., M. T. Babu, M. P. R. Rao, and G. Sasidhar. 2019. Study of mechanical properties of glass–jute-fiber-reinforced hybrid composites by varying its fiber orientation and resins. Recent Advances in Material Sciences 329–38. doi:10.1007/978-981-13-7643-6_26.
   Google Scholar
• Koronis, G., A. Silva, and M. Fontul. 2013. Green composites: A review of adequate materials for automotive applications. Composites Part B: Engineering 44:120–27. doi:10.1016/j.compositesb.2012.07.004.
   Web of Science ®Google Scholar
• Ku, H., H. Wang, N. Pattarachiyakoop, and M. Trada. 2011. A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering 42:856–73. doi:10.1016/j.compositesb.2011.01.010.
   Web of Science ®Google Scholar
• Kumar, S., L. Prasad, and V. K. Patel. 2017. Effect of hybridization of glass/kevlar fiber on mechanical properties of bast reinforced polymer composites: A review. American Journal of Polymer Science & Engineering. 5:13–23. Accessed March, 07 2017. http://www.ivyunion.org/index.php/ajpse/article/view/1049.
   Google Scholar
• Lee, S. H., and A. M. Waas. 1999. Compressive response and failure of fiber reinforced. International Journal of Fracture 100:275–306. doi:10.1023/A:1018779307931.
   Web of Science ®Google Scholar
• Mansor, M. R., S. M. Sapuan, E. S. Zainudin, A. A. Nuraini, and A. Hambali. 2013. Hybrid natural and glass fibers reinforced polymer composites material selection using analytical hierarchy process for automotive brake lever design. Materials and Design 51:484–92. doi:10.1016/j.matdes.2013.04.072.
   Web of Science ®Google Scholar
• Manteghi, S., Z. Mahboob, Z. Fawaz, and H. Bougherara. 2017. Investigation of the mechanical properties and failure modes of hybrid natural fiber composites for potential bone fracture fixation plates. Journal of the Mechanical Behavior of Biomedical Materials 65:306–16. doi:10.1016/j.jmbbm.2016.08.035.
   PubMed Web of Science ®Google Scholar
• Margem, F. M., S. N. Monteiro, J. B. Neto, R. J. S. Rodriguez, and B. G. Soares. 2010. The dynamic mechanical behavior of epoxy matrix composites reinforced with ramie fibers. Matéria 2:164–71. doi:10.1590/S1517-70762010000200012.
   Google Scholar
• Mittal, V., R. Saini, and S. Sinha. 2016. Natural fiber-mediated epoxy composites a review. Composites Part B: Engineering 99:425–35. doi:10.1016/j.compositesb.2016.06.051.
   Web of Science ®Google Scholar
• Mostafa, N. H. 2019. Tensile and fatigue properties of jute-glass hybrid fibre reinforced epoxy composites. Materials Research Express 6:085102. doi:10.1088/2053-1591/ab21f9.
   Web of Science ®Google Scholar
• Omrani, E., P. L. Menezes, and P. K. Rohatgi. 2016. State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Engineering Science and Technology, an International Journal 19:717–36. doi:10.1016/j.jestch.2015.10.007.
   Google Scholar
• Opelt, C. V., J. M. F. Paiva, G. M. Cândido, and M. C. Rezende. 2017. A fractographic study on the effects of hygrothermal conditioning on carbon fiber/epoxy laminates submitted to axial compression. Engineering Failure Analysis 79:342–50. doi:10.1016/j.engfailanal.2017.05.006.
   Web of Science ®Google Scholar
• Ramesh, M., K. Palanikumar, and H. K. Reddy. 2013. Comparative evaluation on properties of hybrid glass fiber- sisal/jute reinforced epoxy composites. Procedia Engineering 2:745–50. doi:10.1016/j.proeng.2013.01.106.
   Google Scholar
• Romanzini, D., A. Lavoratti, H. L. Ornaghi Jr, C. A. Amico, and A. J. Zattera. 2013. Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites. Materials and Design 4:9–15. doi:10.1016/j.matdes.2012.12.029.
   Google Scholar
• Saba, N., M. T. Paridah, M. Jawaid, and O. Y. Alothman. 2015. Mechanical properties of kenaf fibre reinforced polymer composite: A review. Construction and Building Materials 76:87–96. doi:10.1016/j.conbuildmat.2015.12.075.
   Web of Science ®Google Scholar
• Sanjay, M. R., G. R. Arphita, and B. Yogesha. 2015. Study on mechanical properties of natural - glass fibre reinforced polymer hybrid composites: A review. Materials Today: Proceedings 2:2959–67. doi:10.1016/j.matpr.2015.07.264.
   Google Scholar
• Selver, E., N. Ucar, and T. Gulmez. 2018. Effect of stacking sequence on tensile, flexural and thermomechanical properties of hybrid flax/glass and jute/glass thermoset composites. Journal of Industrial Textiles 48:494–520. doi:10.1177/1528083717736102.
   Web of Science ®Google Scholar
• Shan, D. U., P. J. Schubel, and M. J. Clifford. 2013. Can flax replace E-glass in structural composites? A small wind turbine blade case study. Composites Part B: Engineering 52:172–81. doi:10.1016/j.compositesb.2013.04.027.
   Web of Science ®Google Scholar
• Sharba, M. J., Z. Leman, M. T. H. Sultan, M. R. Ishak, and M. A. A. Hanim. 2015. Monotonic and fatigue properties of Kenaf/glass hybrid composites under fully reversed cyclic loading. IOP Conference Series: Materials Science and Engineering 100:012055. doi:10.1088/1757-899X/100/1/012055.
   Google Scholar
• Sharba, M. J., Z. Leman, M. T. H. Sultan, M. R. Ishak, and M. A. A. Hanim. 2016. Partial replacement of glass fiber by woven Kenaf in hybrid composites and its effect on monotonic and fatigue properties. BioResources 11:2665–83. doi:10.15376/biores.11.1.2665-2683.
   Web of Science ®Google Scholar
• Wambua, P., J. Ivens, and I. Verpoest. 2003. Natural fibres: Can they replace glass in fibre reinforced plastics? Composites Science and Technology 63:1259–64. doi:10.1016/S0266-3538(03)00096-4.
   Web of Science ®Google Scholar
• Wang, J. Z., and D. F. Socie. 1993. Failure strength and damage mechanisms of E-glass/epoxy laminates under In-plane biaxial compressive deformation. Journal of Composites Materials 27:1–58. doi:10.1177/002199839302700104.
   Web of Science ®Google Scholar
• Wang, R.-M., S.-R. Zheng, and Y. G. Zheng. 2011. Polymer matrix composites and technology. 1st ed. Beijing: Woodhead Publishing.
   Google Scholar
• Yahaya, R., S. M. Saupan, M. Jawaid, Z. Lemen, and E. S. Zainudin. 2016. Effect of fibre orientations on the mechanical properties of kenaf–Aramid hybrid composites for spall-liner application. Defence Technology 12:52–58. doi:10.1016/j.dt.2015.08.005.
   Web of Science ®Google Scholar
• Yang, B., V. Kozey, S. Adanur, and S. Kumar. 2000. Bending, compression, and shear behavior of woven glass fiber-epoxy composites. Composites Part B: Engineering 312:715–21.
   Google Scholar