References
- Alameda, L., V. Calderón, C. Junco, A. Rodríguez, J. Gadea, and S. Gutiérrez-González. 2016. Characterization of gypsum plasterboard with polyurethane foam waste reinforced with polypropylene fibers. Materiales de Construcción 66 (324):100. doi:https://doi.org/10.3989/mc.2016.v66.i324.
- Ali, M., X. Li, and N. Chouw. 2013. Experimental investigations on bond strength between coconut fibre and concrete. Materials & Design 44:596. doi:https://doi.org/10.1016/j.matdes.2012.08.038.
- Al-Rifaie, W. N., and M. Al-Niami. 2016. Mechanical performance of date palm fibre-reinforced gypsums. Innovative Infrastructure Solutions 1 (1):18. doi:https://doi.org/10.1007/s41062-016-0022-y.
- Aly, M., M. S. J. Hashmi, A. G. Olabi, K. Y. Benyounis, M. Messeiry, A. I. Hussain, and E. F. Abadir. 2012. Optimization of alkaline treatment conditions of flax fiber using box–behnken method. Journal of Natural Fibers 9 (4):256. doi:https://doi.org/10.1080/15440478.2012.738036.
- Aziz, S. H., and M. P. Ansell. 2004. The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 – Polyester resin matrix. Composites Science and Technology 64 (9):1219. doi:https://doi.org/10.1016/j.compscitech.2003.10.001.
- Bektas, F., and B. A. Bektas. 2014. Analyzing mix parameters in ASR concrete using response surface methodology. Construction and Building Materials 66:299. doi:https://doi.org/10.1016/j.conbuildmat.2014.05.055.
- Belaadi, A., A. Bezazi, M. Bourchak, and F. Scarpa. 2013. Tensile static and fatigue behaviour of sisal fibres. Materials & Design 46:76. doi:https://doi.org/10.1016/j.matdes.2012.09.048.
- Belaadi, A., A. Bezazi, M. Bourchak, F. Scarpa, and C. Zhu. 2014. Thermochemical and statistical mechanical properties of natural sisal fibres. Composites Part B: Engineering 67:481. doi:https://doi.org/10.1016/j.compositesb.2014.07.029.
- Cao, Y., S. Shibata, and I. Fukumoto. 2006. Mechanical properties of biodegradable composites reinforced with bagasse fibre before and after alkali treatments. Composites Part A: Applied Science and Manufacturing 37 (3):423. doi:https://doi.org/10.1016/j.compositesa.2005.05.045.
- Carmen, R.-L., and J. Maria. 2017. The influence of natural and synthetic fibre reinforcement on wood-gypsum composites. The Open Construction and Building Technology Journal 11:350. doi:https://doi.org/10.2174/1874836801711010350.
- Chafei, S., F. Khadraoui, M. Boutouil, and M. Gomina. 2015. Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite. Construction and Building Materials 79:229. doi:https://doi.org/10.1016/j.conbuildmat.2014.12.091.
- Dalmay, P., A. Smith, T. Chotard, P. Sahay-Turner, V. Gloaguen, and P. Krausz. 2010. Properties of cellulosic fibre reinforced plaster: Influence of hemp or flax fibres on the properties of set gypsum. Journal of Materials Science 45 (3):793. doi:https://doi.org/10.1007/s10853-009-4002-x.
- Dittenber, D. B., and H. V. Ganga Rao. 2012. Critical review of recent publications on use of natural composites in infrastructure. Composites Part A: Applied Science and Manufacturing 43 (8):1419. doi:https://doi.org/10.1016/j.compositesa.2011.11.019.
- Eve, S., M. Gomina, J.-P. Jernot, J.-C. Ozouf, and G. Orange. 2007. Microstructure characterization of polyamide fibre/latex-filled plaster composites. Journal of the European Ceramic Society 27 (12):3517. doi:https://doi.org/10.1016/j.jeurceramsoc.2005.04.026.
- Gencel, O., J. J. Del Coz Diaz, M. Sutcu, F. Koksal, F. A. Rabanal, G. Martinez-Barrera, and W. Brostow. 2014. Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results. Energy and Buildings 70:135. doi:https://doi.org/10.1016/j.enbuild.2013.11.047.
- Gogna, E., R. Kumar, A. K. Sahoo, and A. Panda. 2019. A comprehensive review on jute fiber reinforced composites. K. Shanker et al. (eds.), Advances in industrial and production engineering, 459–67. Springer, Singapore.
- Hamza, S., H. Saad, B. Charrier, N. Ayed, and F. Charrier-El Bouhtoury. 2013. Physico-chemical characterization of Tunisian plant fibers and its utilization as reinforcement for plaster based composites. Industrial Crops and Products 49:357. doi:https://doi.org/10.1016/j.indcrop.2013.04.052.
- Hernández-Olivares, F., I. Oteiza, and L. de Villanueva. 1992. Experimental analysis of toughness and modulus of rupture increase of sisal short fiber reinforced hemihydrated gypsum. Composite Structures 22 (3):123. doi:https://doi.org/10.1016/0263-8223(92)90001-S.
- Iucolano, F., B. Liguori, P. Aprea, and D. Caputo. 2018. Evaluation of bio-degummed hemp fibers as reinforcement in gypsum plaster. Composites Part B: Engineering 138:149. doi:https://doi.org/10.1016/j.compositesb.2017.11.037.
- Iucolano, F., D. Caputo, F. Leboffe, and B. Liguori. 2015. Mechanical behavior of plaster reinforced with abaca fibers. Construction and Building Materials 99:184. doi:https://doi.org/10.1016/j.conbuildmat.2015.09.020.
- Iucolano, F, D. Caputo, F. Leboffe, and B. Liguori. 2015. Mechanical behavior of plaster reinforced with abaca fibers. Construction and Building Materials 99:184-191. http://dx.doi.org/10.1016/j.conbuildmat.2015.09.020.
- Jeong, I.-J., and K.-J. Kim. 2009. An interactive desirability function method to multiresponse optimization. European Journal of Operational Research 195 (2):412. doi:https://doi.org/10.1016/j.ejor.2008.02.018.
- Laghari, R. A., J. Li, Z. Xie, and S.-Q. Wang. 2018. Modeling and optimization of tool wear and surface roughness in turning of Al/SiCp using response surface methodology. 3D Research 9 (4):46. doi:https://doi.org/10.1007/s13319-018-0199-2.
- Li, X., L. G. Tabil, and S. Panigrahi. 2007. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review. Journal of Polymers and the Environment 15 (1):25. doi:https://doi.org/10.1007/s10924-006-0042-3.
- Mermerdaş, K., Z. Algın, S. M. Oleiwi, and D. E. Nassani. 2017. Optimization of lightweight GGBFS and FA geopolymer mortars by response surface method. Construction and Building Materials 139:159. doi:https://doi.org/10.1016/j.conbuildmat.2017.02.050.
- Mwaikambo, L. Y., and M. P. Ansell. 2002. Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization. Journal of Applied Polymer Science 84 (12):2222. doi:https://doi.org/10.1002/app.10460.
- Myers, R. H. 1995. Response surface methodology: Process and product optimization using designed experiments. Wiley Series in Probability and Statistics. https://ci.nii.ac.jp/naid/10010775159/en/
- Nambiar, E. K., and K. Ramamurthy. 2006. Models relating mixture composition to the density and strength of foam concrete using response surface methodology. Cement and Concrete Composites 28 (9):752. doi:https://doi.org/10.1016/j.cemconcomp.2006.06.001.
- Nazerian, M., and M. Kamyab. 2013. Gypsum-bonded particleboard manufactured from agricultural based material. Forest Science and Practice 15 (4):325. doi:https://doi.org/10.1007/s11632-013-0420-6.
- Niaki, M. H., A. Fereidoon, and M. G. Ahangari. 2018. Experimental study on the mechanical and thermal properties of basalt fiber and nanoclay reinforced polymer concrete. Composite Structures 191:231. doi:https://doi.org/10.1016/j.compstruct.2018.02.063.
- Nindiyasari, F., E. Griesshaber, T. Zimmermann, A. P. Manian, C. Randow, R. Zehbe, and W. W. Schmahl. 2016. Characterization and mechanical properties investigation of the cellulose/gypsum composite. Journal of Composite Materials 50 (5):657. doi:https://doi.org/10.1177/0021998315580826.
- Qingwei, S., Z. Han, L. Haoyu, Z. Haiyang, and G. Mingming. 2018. Application of response surface methodology in the optimization of fly ash geopolymer concrete. Romanian Journal of Materials 48 (1):45.
- Rachedi, R., A. Kriker, and A. Mokhtari. 2018. Physico-mechanical properties of plaster mortar reinforced with date palm fibers. Scholar Journal of Applied Sciences and Research 1 (7):21.
- Ramakrishna, G., and T. Sundararajan. 2005. Impact strength of a few natural fibre reinforced cement mortar slabs: A comparative study. Cement and Concrete Composites 27 (5):547. doi:https://doi.org/10.1016/j.cemconcomp.2004.09.006.
- Ray, D., and B. K. Sarkar. 2001. Characterization of alkali-treated jute fibers for physical and mechanical properties. Journal of Applied Polymer Science 80 (7):1013. doi:https://doi.org/10.1002/app.1184.
- Romaniega Piñeiro, S., M. Del Río Merino, and C. Pérez García. 2015. New plaster composite with mineral wool fibres from CDW recycling. Advances in Materials Science and Engineering 2015. doi:https://doi.org/10.1155/2015/854192.
- Samuel, O. D., and M. O. Okwu. 2019. Comparison of response surface methodology (RSM) and artificial neural network (ANN) in modelling of waste coconut oil ethyl esters production. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 41 (9):1049. doi:https://doi.org/10.1080/15567036.2018.1539138.
- Sedan, D., C. Pagnoux, A. Smith, and T. Chotard. 2008. Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction. Journal of the European Ceramic Society 28 (1):183. doi:https://doi.org/10.1016/j.jeurceramsoc.2007.05.019.
- Şimşek, B., Y. T. İç, and E. H. Şimşek. 2016. A RSM-based multi-response optimization application for determining optimal mix proportions of standard ready-mixed concrete. Arabian Journal for Science and Engineering 41 (4):1435. doi:https://doi.org/10.1007/s13369-015-1987-0.
- Van de Weyenberg, I., T. Chi Truong, B. Vangrimde, and I. Verpoest. 2006. Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment. Composites Part A: Applied Science and Manufacturing 37 (9):1368. doi:https://doi.org/10.1016/j.compositesa.2005.08.016.
- Zakaria, M., M. Ahmed, M. Hoque, and A. Shaid. 2018. A comparative study of the mechanical properties of jute fiber and yarn reinforced concrete composites. Journal of Natural Fibers 1–12. doi:https://doi.org/10.1080/15440478.2018.1525465.