References
- Arthanarieswaran, V. P., A. Kumaravel, M. Kathirselvam, and S. S. Saravanakumar. 2016. Mechanical and thermal properties of acacia leucophloea fiber/epoxy composites: Influence of fiber loading and alkali treatment. International Journal of Polymer Analysis and Characterization 21 (7):571–83. doi:https://doi.org/10.1080/1023666X.2016.1183279.
- Badrinath, R., and T. Senthilvelan. 2014. Comparative investigation on mechanical properties of banana and sisal reinforced polymer based composites. Procedia Materials Science 5:2263–72. doi:https://doi.org/10.1016/j.mspro.2014.07.444.
- Biswas, S., S. Shahinur, M. Hasan, and Q. Ahsan. 2015. Physical, mechanical and thermal properties of jute and bamboo fiber reinforced unidirectional epoxy composites. Procedia Engineering 105:933–39. doi:https://doi.org/10.1016/j.proeng.2015.05.118.
- Boopalan, M., M. Niranjanaa, and M. J. Umapathy. 2013. Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites. Composites Part B: Engineering 51:54–57. doi:https://doi.org/10.1016/j.compositesb.2013.02.033.
- Codispoti, R., D. V. Oliveira, R. S. Olivito, P. B. Lourenço, and R. Fangueiro. 2015. Mechanical performance of natural fiber-reinforced composites for the strengthening of masonry. Composites Part B: Engineering 77:74–83. doi:https://doi.org/10.1016/j.compositesb.2015.03.021.
- Gopinath, A. M., S. Kumar, and A. Elayaperumal. 2014. Experimental investigations on mechanical properties of jute fiber reinforced composites with polyester and epoxy resin matrices. Procedia Engineering 97:2052–63. doi:https://doi.org/10.1016/j.proeng.2014.12.448.
- Hanan, F., M. Jawaid, and P. Md Tahir. 2018. Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites. Journal of Natural Fibers 1–13. doi:https://doi.org/10.1080/15440478.2018.1477083.
- Hossain, R. M., A. Islam, A. W. Van Vuure, and V. Ignaas. 2013. Effect of fiber orientation on the tensile properties of jute epoxy laminated composite. Journal of Scientific Research 5 (1):43–54. doi:https://doi.org/10.3329/jsr.v5i1.10519.
- Kommula, V. P., K. O. Reddy, M. Shukla, T. Marwala, and A. V. Rajulu. 2014. Mechanical properties, water absorption, and chemical resistance of napier grass fiber strand–reinforced epoxy resin composites. International Journal of Polymer Analysis and Characterization 19 (8):693–708. doi:https://doi.org/10.1080/1023666X.2014.954186.
- Krishnan, T., S. Jayabal, and V. N. Krishna. 2018. Tensile, flexural, impact, and hardness properties of alkaline-treated Sunnhemp fiber reinforced polyester composites. Journal of Natural Fibers 1–11. doi:https://doi.org/10.1080/15440478.2018.1492488.
- Kumar, S. S., D. A. Duraibabu, and K. Subramanian. 2014. Studies on mechanical, thermal and dynamic mechanical properties of untreated (raw) and treated coconut sheath fiber reinforced epoxy composites. Materials & Design 59:63–69. doi:https://doi.org/10.1016/j.matdes.2014.02.013.
- Mahesha, G. T., S. B. Satish, K. M. Vijaya, and K. S. Bhat. 2016. Preparation of unidirectional grewia serrulata fiber-reinforced polyester composites and evaluation of tensile and flexural properties. Journal of Natural Fibers 13 (5):547–54. doi:https://doi.org/10.1080/15440478.2015.1081575.
- Melkamu, A., M. B. Kahsay, and A. G. Tesfay. 2019. Mechanical and water-absorption properties of sisal fiber (Agave sisalana)-reinforced polyester composite. Journal of Natural Fibers 16 (6):877–85. doi:https://doi.org/10.1080/15440478.2018.1441088.
- Mylsamy, K. I., and Rajendran. 2011. The mechanical properties, deformation and thermomechanical properties of alkali treated and untreated Agave continuous fibre reinforced epoxy composites. Materials & Design 32 (5):3076–84. doi:https://doi.org/10.1016/j.matdes.2010.12.051.
- Nijandhan, K., R. Muralikannan, and S. Venkatachalam. 2018. Ricinus communis fiber as potential reinforcement for lightweight polymer composites. Materials Research Express 5 (9). doi: https://doi.org/10.1088/2053-1591/aad617.
- Palanikumar, K., M. Ramesh, and K. Hemachandra Reddy. 2016. Experimental investigation on the mechanical properties of green hybrid sisal and glass fiber reinforced polymer composites. Journal of Natural Fibers 13 (3):321–31. doi:https://doi.org/10.1080/15440478.2015.1029192.
- Pereira, T. G. T., J. F. Mendes, J. E. Oliveira, J. M. Marconcini, and R. F. Mendes. 2018. Effect of reinforcement percentage of eucalyptus fibers on physico-mechanical properties of composite hand lay-up with polyester thermosetting matrix. Journal of Natural Fibers 1–11. doi:https://doi.org/10.1080/15440478.2018.1439426.
- Pokhriyal, M., L. Prasad, and H. P. Raturi. 2018. An experimental investigation on mechanical and tribological properties of himalayan nettle fiber composite. Journal of Natural Fibers 15 (5):752–61. doi:https://doi.org/10.1080/15440478.2017.1364202.
- Premnath, A. A. 2018. Impact of surface treatment on the mechanical properties of sisal and jute reinforced with epoxy resin natural fiber hybrid composites. Journal of Natural Fibers 1–11. doi:https://doi.org/10.1080/15440478.2018.1432002.
- Rajan, M. C., B., . A. Senthil Kumar, T. Sornakumar, P. Senthamaraikannan, and M. R. Sanjay. 2018. Multi response optimization of fabrication parameters of carbon fiber-reinforced aluminium laminates (CARAL): By taguchi method and gray relational analysis. Polymer Composites 40 (S2):E1041–48. doi:https://doi.org/10.1002/pc.24815.
- Ramnath, B. V., S. J. Kokan, R. N. Raja, R. Sathyanarayanan, C. Elanchezhian, A. R. Prasad, and V. M. Manickavasagam. 2013. Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy composite. Materials & Design 51:357–66. doi:https://doi.org/10.1016/j.matdes.2013.03.102.
- Ramnath, B. V., V. M. Manickavasagam, C. Elanchezhian, C. V. Krishna, S. Karthik, and K. Saravanan. 2014. Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite. Materials & Design 60:643–52. doi:https://doi.org/10.1016/j.matdes.2014.03.061.
- Reddy, B. M., Y. V. Mohana Reddy, B. C. Mohan Reddy, and R. M. Reddy. 2018. Mechanical, morphological, and thermogravimetric analysis of alkali-treated cordia-dichotoma natural fiber composites. Journal of Natural Fibers :1–10. doi:https://doi.org/10.1080/15440478.2018.1534183.
- Sapuan, S. M., A. Leenie, M. Harimi, and Y. K. Beng. 2006. Mechanical properties of woven banana fibre reinforced epoxy composites. Materials and Design 27 (8):689–93. doi:https://doi.org/10.1016/j.matdes.2004.12.016.
- Saravana Kumaar, A., A. Senthilkumar, T. Sornakumar, S. S. Saravanakumar, and V. P. Arthanariesewaran. 2017. Physicochemical properties of new cellulosic fiber extracted from carica papaya bark. Journal of Natural Fibers 1–10. doi:https://doi.org/10.1080/15440478.2017.1410514.
- Saravanakumaar, A., A. Senthilkumar, S. S. Saravanakumar, M. R. Sanjay, and A. Khan. 2018. Impact of alkali treatment on physico-chemical, thermal, structural and tensile properties of Carica Papaya bark fibers. International Journal of Polymer Analysis and Characterization 23 (6):529–36. doi:https://doi.org/10.1080/1023666X.2018.1501931.
- Shanmugasundaram, N., I. Rajendran, and T. Ramkumar. 2018. Static, dynamic mechanical and thermal properties of untreated and alkali treated mulberry fiber reinforced polyester composites. Polymer Composites 39:E1908–19. doi:https://doi.org/10.1002/pc.24890.
- Sinha, A. K., H. K. Narang, and S. Bhattacharya. 2017. Mechanical properties of natural fibre polymer composites. Journal of Polymer Engineering 37 (9):879–95. doi:https://doi.org/10.1515/polyeng-2016-0362.
- Sreenivasan, V. S., D. Ravindran, V. Manikandan, and R. Narayanasamy. 2011. Mechanical properties of randomly oriented short sansevieria cylindrica fibre/polyester composites. Materials and Design 32 (4):2444–55. doi:https://doi.org/10.1016/j.matdes.2010.11.042.
- Sreenivasan, V. S., D. Ravindran, V. Manikandan, and R. Narayanasamy. 2012. Influence of fibre treatments on mechanical properties of short sansevieria cylindrica/polyester composites. Materials and Design 37:111–21. doi:https://doi.org/10.1016/j.matdes.2012.01.004.
- Vijayakumar, S., T. Nilavarasan, R. Usharani, and L. Karunamoorthy. 2014. Mechanical and microstructure characterization of Coconut spathe fibers and Kenaf bast fibers reinforced epoxy polymer matrix composites. Procedia Materials Science 5:2330–37. doi:https://doi.org/10.1016/j.mspro.2014.07.476.
- Zuhri, M., M. Yusoff, S. M. Sapuan, N. Ismail, and R. Wirawan. 2010. Mechanical properties of short random oil palm fibre reinforced epoxy composites. Sains Malaysiana 39 (1):87–92.