References
- Abd El-baky, M. A. 2017. Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites. Fibers and Polymers 18 (12):2417–32. doi:https://doi.org/10.1007/s12221-017-7682-x.
- Abd El-baky, M. A. 2018. Impact performance of hybrid laminated composites with statistical analysis. Iranian Polymer Journal 27 (7):445–59. doi:https://doi.org/10.1007/s13726-018-0622-9.
- Abd El-baky, M. A., and M. A. Attia. 2019. Water absorption effect on the in-plane shear properties of jute–glass–carbon-reinforced composites using Iosipescu test. Journal of Composite Materials 53 (21):3033–45. doi:https://doi.org/10.1177/0021998318809525.
- Afaghi Khatibi, A., E. Kandare, and S. Yoo. 2016. Can hybridization of flax-polymer composites with metallic alloys enable their adoption in structural engineering applications? Advanced Composites Innovation Conference, 1–13. Composites Australia.
- ASTM D 3039. 2000. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken.
- ASTM D792. 2008. Standard test methods for density and specific gravity (relative density) of plastics by displacement.
- Attia, M. A., M. A. Abd El-baky, and A. E. Alshorbagy. 2017. Mechanical performance of intraply and inter-intraply hybrid composites based on e-glass and polypropylene unidirectional fibers. Journal of Composite Materials 51 (3):381–94. doi:https://doi.org/10.1177/0021998316644972.
- Attia, M. A., M. A. Abd El-baky, M. A. Hassan, T. A. Sebaey, and E. Mahdi. 2018. Crashworthiness characteristics of carbon–jute–glass reinforced epoxy composite circular tubes. Polymer Composites 39 (S4):E2245–E2261. doi:https://doi.org/10.1002/pc.v39.S4.
- Banerjee, A. N., N. Saha, and B. C. Mitra. 1996. Flexural behavior of unidirectional polyethylene–carbon fibers–PMMA hybrid composite laminates. Journal of Applied Polymer Science 60 (1):139–42. doi:https://doi.org/10.1002/()1097-4628.
- Chai, G. B., and P. Manikandan. 2014. Low velocity impact response of fibre-metal laminates–A review. Composite Structures 107:363–81. doi:https://doi.org/10.1016/j.compstruct.2013.08.003.
- Chandrasekar, M., M. R. Ishak, M. S. Sapuan, Z. Leman, and M. Jawaid. 2016. Tensile and flexural proeprties of the hybrid flax/carbon based fibre metal laminate, 5-10. Proceedings of the 5th Postgraduate Seminar on Natural Fiber Composites, at INTROP, UPM, Malaysia.
- Chandrasekar, M., M. R. Ishak, S. M. Sapuan, Z. Leman, and R. M. Shahroze. 2019. Effect of freezing temperature and stacking sequence on the mechanical properties of hybrid fibre metal laminates made with carbon, flax, and sugar palm fibres. BioResources 14 (2):3042–56.
- Critchlow, G. W., and D. M. Brewis. 1996. Review of surface pretreatments for aluminium alloys. International Journal of Adhesion and Adhesives 16 (4):255–75. doi:https://doi.org/10.1016/S0143-7496(96)00014-0.
- Davis, M., and D. Bond. 1999. Principles and practices of adhesive bonded structural joints and repairs. International Journal of Adhesion and Adhesives 19 (2–3):91–105. doi:https://doi.org/10.1016/S0143-7496(98)00026-8.
- Dhar Malingam, S., F. A. Jumaat, L. F. Ng, K. Subramaniam, and A. F. Ab Ghani. 2018. Tensile and impact properties of cost‐effective hybrid fiber metal laminate sandwich structures. Advances in Polymer Technology 37 (7):2385–93. doi:https://doi.org/10.1002/adv.2018.37.issue-7.
- Dhar Malingam, S., M. Z. Selamat, R. Said, and S. Subramonian. 2016. A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences 11 (4):2483–88.
- Farsani, R. E., S. M. R. Khalili, and V. Daghigh. 2014. Charpy impact response of basalt fiber reinforced epoxy and basalt fiber metal laminate composites: Experimental study. International Journal of Damage Mechanics 23 (6):729–44. doi:https://doi.org/10.1177/1056789513511976.
- Feng, N. L., S. Dhar Malingam, K. A. Zakaria, and M. Z. Selamat. 2019. Investigation on the fatigue life characteristic of kenaf/glass woven-ply reinforced metal sandwich materials. Journal of Sandwich Structures & Materials 21 (7):2440–55. doi:https://doi.org/10.1177/1099636217729910.
- Ferreira, S. R., F. de Andrade Silva, P. R. L. Lima, and R. D. Toledo Filho. 2016. Effect of natural fiber hornification on the fiber matrix interface in cement based composite systems. In Khosrow Ghavami (ed.), Key engineering materials, Vol. 668, 118–25. Switzerland: Trans Tech Publications Ltd.
- Gunwant, D., M. Pandey, V. K. Yadav, P. Singh, and A. Bhatt. 2018. Prediction of tensile properties of novel natural, fiber based fiber metal laminates (FMLs) using FEM. International Journal for Research in Applied Science & Engineering Technology (IJRASET) 6 (VI). www.ijraset.com.
- Hussain, F., D. Sivakumar, M. Daud, and M. Selamat. 2016. Tensile performance of palm oil fiber metal laminate. Proceedings of Mechanical Engineering Research Day 2016:121–22.
- Ishak, N. M., D. Sivakumar, and M. R. Mansor. 2018. The application of TRIZ on natural fibre metal laminate to reduce the weight of the car front hood. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 (2):105. doi:https://doi.org/10.1007/s40430-018-1039-2.
- JIS K 7055. 1987. Testing method for flexural properties of glass fiber reinforced plastics. Japanese Standards Association.
- Kandare, E., S. Yoo, and A. Afaghi Khatibi. 2016. On the fatigue and impact resistance of fibre-metal-laminates reinforced with flax fibres. Advanced Composites Innovation Conference, 1–13. Melbourne, Australia.
- Katogi, H., K. Takemura, and R. Sebori. 2016. Fatigue property of natural fiber after alkali treatment. Proceedings of the 2 nd international conference on high performance and optimum design of structures and materials (EHPSM 2016), 343–50. doi: https://doi.org/10.1097/RCT.0000000000000368.
- Khalili, S. M. R., V. Daghigh, and R. Eslami Farsani. 2011. Mechanical behavior of basalt fiber-reinforced and basalt fiber metal laminate composites under tensile and bending loads. Journal of Reinforced Plastics and Composites 30 (8):647–59. doi:https://doi.org/10.1177/0731684411398535.
- Khan, M. Z., S. K. Srivastava, and M. K. Gupta. 2018. Tensile and flexural properties of natural fiber reinforced polymer composites: A review. Journal of Reinforced Plastics and Composites 37 (24):1435–55. doi:https://doi.org/10.1177/0731684418799528.
- Kuan, H. T. N., W. J. Cantwell, M. A. Hazizan, and C. Santulli. 2011. The fracture properties of environmental-friendly fiber metal laminates. Journal of Reinforced Plastics and Composites 30 (6):499–508. doi:https://doi.org/10.1177/0731684411398536.
- Li, X., L. G. Tabil, and S. Panigrahi. 2007. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review. Journal of Polymers and the Environment 15 (1):25–33. doi:https://doi.org/10.1007/s10924-006-0042-3.
- Li, X., M. Y. Yahya, A. Bassiri Nia, Z. Wang, and G. Lu. 2016. Dynamic failure of fibre-metal laminates under impact loading–experimental observations. Journal of Reinforced Plastics and Composites 35 (4):305–19. doi:https://doi.org/10.1177/0731684415616501.
- Megahed, M., M. A. Abd El-baky, A. M. Alsaeedy, and A. E. Alshorbagy. 2019a. An experimental investigation on the effect of incorporation of different nanofillers on the mechanical characterization of fiber metal laminate. Composites Part B: Engineering 176:107277. doi:https://doi.org/10.1016/j.compositesb.2019.107277.
- Megahed, M., M. A. Abd El-baky, A. M. Alsaeedy, and A. E. Alshorbagy. 2019b. Improvement of impact and water barrier properties of GLARE by incorporation of different types of nanoparticles. Fibers and Polymers. Accepted manuscript. doi:https://doi.org/10.1007/s12221-000-0000-0.
- Mohammed, I., A. R. A. Talib, M. T. H. Sultan, M. Jawaid, A. H. Ariffin, and S. Saadon. 2018. Mechanical properties of fibre-metal laminates made of natural/synthetic fibre composites. BioResources 13 (1):2022–34. doi:https://doi.org/10.15376/biores.13.1.2022-2034.
- Nabila, S., A. L. Juwono, and S. Roseno. 2017. Effect of weight fractions of jute fiber on tensile strength and deflection temperature of jute fiber/polypropylene composites. IOP conference series: Materials science and engineering, Vol. 196, No. 1, 012029. IOP Publishing. Corfu, Greece. doi:https://doi.org/10.1016/j.jep.2016.12.031
- Ng, L. F., S. Dhar Malingam, K. A. Zakaria, and M. Z. Selamat. 2017. Fatigue performance of hybrid fibre metal laminate structure. International Review of Mechanical Engineering 11 (1):61–68.
- Nunna, S., P. R. Chandra, S. Shrivastava, and A. K. Jalan. 2012. A review on mechanical behavior of natural fiber based hybrid composites. Journal of Reinforced Plastics and Composites 31 (11):759–69. doi:https://doi.org/10.1177/0731684412444325.
- Oksman, K. 2000. Mechanical properties of natural fibre mat reinforced thermo-plastic. Applied Composite Materials 7 (5–6):403–14. doi:https://doi.org/10.1023/A:1026546426764.
- Oksman, K., M. Skrifvars, and J. F. Selin. 2003. Natural fibres as reinforcement in polylactic acid (PLA) composites. Composites Science and Technology 63 (9):1317–24. doi:https://doi.org/10.1016/S0266-3538(03)00103-9.
- Park, S. Y., W. J. Choi, H. S. Choi, and H. Kwon. 2010. Effects of surface pre-treatment and void content on GLARE laminate process characteristics. Journal of Materials Processing Technology 210 (8):1008–16. doi:https://doi.org/10.1016/j.jmatprotec.2010.01.017.
- Prolongo, S. G., and A. Ureña. 2009. Effect of surface pre-treatment on the adhesive strength of epoxy–aluminium joints. International Journal of Adhesion and Adhesives 29 (1):23–31. doi:https://doi.org/10.1016/j.ijadhadh.2008.01.001.
- Rout, J., M. Misra, S. S. Tripathy, S. K. Nayak, and A. K. Mohanty. 2001. The influence of fibre treatment on the performance of coir-polyester composites. Composites Science and Technology 61 (9):1303–10. doi:https://doi.org/10.1016/S0266-3538(01)00021-5.
- Sadeghpour, E., M. Sadighi, and S. Dariushi. 2013. An investigation on blunt notch behavior of fiber metal laminates containing notch with different shapes. Journal of Reinforced Plastics and Composites 32 (15):1143–52. doi:https://doi.org/10.1177/0731684413484817.
- Salgin, B., O. Ozkanat, J. M. Mol, H. Terryn, and M. Rohwerder. 2013. Role of surface oxide properties on the aluminum/epoxy interfacial bonding. The Journal of Physical Chemistry C 117 (9):4480–87. doi:https://doi.org/10.1021/jp310121e.
- Satyanarayana, K. G., G. G. Arizaga, and F. Wypych. 2009. Biodegradable composites based on lignocellulosic fibers-An overview. Progress in Polymer Science 34 (9):982–1021. doi:https://doi.org/10.1016/j.progpolymsci.2008.12.002.
- Selmy, A. I., A. R. Elsesi, N. A. Azab, and M. A. El-baky. 2011. Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites. Materials & Design 32 (2):743–49. doi:https://doi.org/10.1016/j.matdes.2010.07.031.
- Shahroze, R. M., M. R. Ishak, M. S. Salit, Z. Leman, M. Asim, and M. Chandrasekar. 2018. Effect of organo-modified nanoclay on the mechanical properties of sugar palm fiber-reinforced polyester composites. BioResources 13 (4):7430–44. doi:https://doi.org/10.15376/biores.13.4.7430-7444.
- Shih, Y. F., W. C. Chang, W. C. Liu, C. C. Lee, C. S. Kuan, and Y. H. Yu. 2014. Pineapple leaf/recycled disposable chopstick hybrid fiber-reinforced biodegradable composites. Journal of the Taiwan Institute of Chemical Engineers 45 (4):2039–46. doi:https://doi.org/10.1016/j.jtice.2014.02.015.
- Sinmazçelik, T., E. Avcu, M. Ö. Bora, and O. Çoban. 2011. A review: Fibre metal laminates, background, bonding types and applied test methods. Materials & Design 32 (7):3671–85. doi:https://doi.org/10.1016/j.matdes.2011.03.011.
- Sivakumar, D., S. Kathiravan, L. F. Ng, M. B. Ali, M. Z. Selamat, S. Sivaraos, and O. Bapokutty. 2018a. Experimental investigation on charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN J. Eng. Appl. Sci 13:822–27.
- Sivakumar, D., L. Ng, and M. Z. Selamat. 2017. Investigation on fatigue life behaviour of sustainable bio-based fibre metal laminate. J Mech Eng 1:123–40.
- Subagia, I. A., Y. Kim, L. D. Tijing, C. S. Kim, and H. K. Shon. 2014. Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers. Composites Part B: Engineering 58:251–58. doi:https://doi.org/10.1016/j.compositesb.2013.10.027.
- Subramaniam, K., S. Dhar Malingam, N. L. Feng, and O. Bapokutty. 2019. The effects of stacking configuration on the response of tensile and quasi‐static penetration to woven kenaf/glass hybrid composite metal laminate. Polymer Composites 40 (2):568–77. doi:https://doi.org/10.1002/pc.v40.2.
- Sun, Z. Q., M. H. Huang, and G. H. Hu. 2012. Surface treatment of new type aluminum lithium alloy and fatigue crack behaviors of this alloy plate bonded with Ti–6Al–4V alloy strap. Materials & Design 35:725–30. doi:https://doi.org/10.1016/j.matdes.2011.10.035.
- Vasumathi, M., and V. Murali. 2013. Effect of alternate metals for use in natural fibre reinforced fibre metal laminates under bending, impact and axial loadings. Procedia Engineering 64:562–70. doi:https://doi.org/10.1016/j.proeng.2013.09.131.
- Vieira, L. M. G., J. C. Dos Santos, T. H. Panzera, J. C. C. Rubio, and F. Scarpa. 2017. Novel fibre metal laminate sandwich composite structure with sisal woven core. Industrial Crops and Products 99:189–95. doi:https://doi.org/10.1016/j.indcrop.2017.02.008.
- Xu, Y., H. Li, Y. Shen, S. Liu, W. Wang, and J. Tao. 2016. Improvement of adhesion performance between aluminum alloy sheet and epoxy based on anodizing technique. International Journal of Adhesion and Adhesives 70:74–80. doi:https://doi.org/10.1016/j.ijadhadh.2016.05.007.
- Zakaria, A. Z., K. Shelesh-nezhad, T. N. Chakherlou, and A. Olad. 2017. Effects of aluminum surface treatments on the interfacial fracture toughness of carbon-fiber aluminum laminates. Engineering Fracture Mechanics 172:139–51. doi:https://doi.org/10.1016/j.engfracmech.2017.01.004.
- Zalani, M., N. Fazilah, S. Dharmalingam, and M. Z. Selamat. 2016. Tensile properties of woven kenaf fiber reinforced polypropylene hybrid aluminium-composite. ARPN Journal Of Engineering And Applied Sciences 11 (12):7823–27.