References
- Ahmad, M. R., S. A. Suhaimi, N. A. A. Bakar, W. Y. W. Ahmad, and J. Salleh. 2012. Tensile and tearing strength of uncoated and natural rubber latex coated high strength woven fabrics. IEEE Symposium on Humanities, Science and Engineering Research 541–45, Kuala Lumpur, Malaysia.
- Ahmad, N., S. Kamal, Z. A. Raza, T. Hussain, and F. Anwar. 2016. Multi-response optimization in the development of oleo-hydrophobiccotton fabric using Taguchi based Grey relational analysis. Applied Surface Science 367:370–81. doi:https://doi.org/10.1016/j.apsusc.2016.01.165.
- Almetwally, A. A. 2019. Multi-objective Optimization of woven fabric parameters using Taguchi–Grey relational analysis. Journal of Natural Fibers. doi:https://doi.org/10.1080/15440478.2019.1579156.
- Azmir, M. A., A. K. Ahsan, A. Rahmah, M. M. Noor, and A. A. Aziz. 2007. Optimization of abrasive waterjet machining process parameters using orthogonal array with Grey Relational analysis. Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3ARC) 21–30. Kuala Lumpur, Malaysia.
- Das, D., and R. Thakur. 2013. Taguchi analysis of fabric shrinkage. Fibers and Polymer 14 (3):482–87. doi:https://doi.org/10.1007/s12221-013-0482-z.
- Dumanic, I., S. Jozic, D. Bajic, and J. Krolo. 2020. Optimization of semi-solid high-pressure die casting process by computer simulation, Taguchi method and Grey relational analysis. International Journal of Metalcasting. doi:https://doi.org/10.1007/s40962-020-00422-5.
- Eltahan, E. 2018. Structural parameters affecting tear strength of the fabrics tents. Alexandria Engineering Journal 57:97–105. doi:https://doi.org/10.1016/j.aej.2016.12.005.
- Engin, A. B., Ö. Özdemir, M. Turan, and A. Z. Turan. 2008. Color removal from textile dyebath effluents in a zeolite fixed bed reactor: Determination of optimum process conditions using Taguchi method. Journal of Hazardous Materials 159:348–53. doi:https://doi.org/10.1016/j.jhazmat.2008.02.065.
- Fazeli, F., H. Tavanai, and A. Z. Hamadani. 2012. Application of Taguchi and full factorial experimental design to model the color yield of cotton fabric dyed with six selected direct dyes. Journal of Engineered Fibers and Fabrics 7 (3):34–42. doi:https://doi.org/10.1177/155892501200700306.
- Gaitonde, V. N., S. R. Karnik, and J. Paulo Davim. 2008. Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept. Journal of Materials Processing Technology 196:73–78. doi:https://doi.org/10.1016/j.jmatprotec.2007.05.003.
- Gunes, S., E. Senyigit, E. Karakaya, and V. Ozceyhan. 2019. Optimization of heat transfer and pressure drop in a tube with loosefit perforated twisted tapes by Taguchi method and grey relational analysis. Journal of Thermal Analysis and Calorimetry 136:1795–806. doi:https://doi.org/10.1007/s10973-018-7824-4.
- Hussain, O., S. S. Saleem, and B. Ahmad. 2020. Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication. Materials Chemistry and Physics 239:121918. doi:https://doi.org/10.1016/j.matchemphys.2019.121918.
- Hussain, T., F. A. Arain, and Z. A. Malik. 2017. Use of Taguchi method and Grey relational analysis to optimize multiple yarn characteristics in open-end rotor spinning. AUTEX Research Journal 17 (1):67–72. doi:https://doi.org/10.1515/aut-2015-0046.
- Jong, W.-R., Y.-M. Huang, Y.-Z. Lin, S.-C. Chen, and Y.-W. Chen. 2020. Integrating Taguchi method and artificial neural network to explore machine learning of computer aided engineering. Journal of the Chinese Institute of Engineers 1–11. doi:https://doi.org/10.1080/02533839.2019.1708804.
- Kghanlou, H. M., B. C. Ang, S. Talebian, A. M. Afifi, and A. Andriyana. 2015. Electrospinning of polymethyl methacrylate nanofibers: Optimization of processing parameters using the Taguchi design of experiments. Textile Research Journal 85 (4):356–68. doi:https://doi.org/10.1177/0040517514547208.
- Kuo, C. J., T. Su, and C. Tsai. 2007. Optimization of the needle punching process for the nonwoven fabrics with multiple quality characteristics by Grey-Based Taguchi method. Fibers and Polymers 8 (6):654–64. doi:https://doi.org/10.1007/BF02876005.
- Mahapatra, S. S., and V. Chaturvedi. 2009. Modelling and analysis of abrasive wear performance of composites using Taguchi approach. International Journal of Engineering, Science and Technology 1 (1):123–35. doi:https://doi.org/10.4314/ijest.v1i1.58072.
- Masaeli, R., H. Hasani, and M. Shanbeh. 2015. Optimizing the physical properties of elastic woven fabrics using Grey–Taguchi method. The Journal of the Textile Institute 106 (8):814–22. doi:https://doi.org/10.1080/00405000.2014.946341.
- Masqood, M., T. Hussain, N. Ahmad, and Y. Nawab. 2017. Multi-response optimization of mechanical and comfort properties of bi-stretch woven fabrics using grey relational analysis in Taguchi method. The Journal of the Textile Institute 108 (5):794–802. doi:https://doi.org/10.1080/00405000.2016.1191721.
- Mohamed, S. A. N., E. S. Zainudin, S. M. Sapuan, M. A. M. Deros, and A. M. T. Arifin. 2019. Integration of Taguchi-Grey Relational analysis technique in parameter process optimization for rice husk composite. BioResources 14 (1):1110–26.
- Nassif, G. A. 2017. Using Taguchi methodology to optimize woven fabrics air permeability. Journal of Textile Science & Engineering 7 (6):2–4. doi:https://doi.org/10.4172/2165-8064.1000325.
- Nilsson, C., and E. Lindstam 2012. Assessing denim quality. Bachelor Thesis, Textile Technology Swedish School of Textiles.
- Ogulata, R. T., and S. M. Mezarcioz. 2011. Optimization of air permeability of knitted fabrics with the Taguchi approach. The Journal of the Textile Institute 102 (5):395–404. doi:https://doi.org/10.1080/00405000.2010.482347.
- Pervez, M. N., F. Shafiq, Z. Sarwar, M. M. Jilani, and Y. Cai. 2018. Multi-Response optimization of resin finishing by using a Taguchi-based Grey relational analysis. Materials 11 (426):1–19. doi:https://doi.org/10.3390/ma11030426.
- Rehman, A., Z. A. Raza, R. Masoos, M. T. Hussain, and N. Ahmad. 2015. Multi-response optimization in enzymatic desizing of cotton fabric under various chemo-physical conditions using a Taguchi approach. Cellulose 22:2107–16. doi:https://doi.org/10.1007/s10570-015-0598-y.
- Samanta, K. K., S. Basak, and S. K. Chattopadhyay. 2017. Sustainability in denim. United Kingdom: Woodhead Publishing, Elsevier BV.
- Saravanan, D., V. A. A. Ramanathan, P. Karthick, S. V. Murugan, and G. Nalankilli. 2010. Optimisation of multi-enzyme scouring process using Taguchi methods. Indian Journal of Fibre &textile Research 35:164–71.
- Sarpkaya, Ç., E. Özgür, and E. C. Sabır. 2015. The Optimization of woven fabric tensile strength with Taguchi method based on Grey Relational analysis. Textile and Apparel 25 (4):293–99.
- Sen, A. K. 2008. Coated textiles, principles and applications. London: LLC, Taylor and Francis Group.
- Shaker, K., M. Umair, M. Maqsood, Y. Nawab, S. Ahmad, A. Rasheed, M. Ashraf, and A. Basit. 2015. A statistical approach for obtaining the controlled woven fabric width. Autex Research Journal 15 (4):275–79. doi:https://doi.org/10.1515/aut-2015-0008.
- Sharma, D., V. Kumar, R. Nautiyal, and P. Sharma. 2020. Synthesis and characterization of quaternized Cassia tora gum using Taguchi L’16 approach. Carbohydrate Polymers 232 (115731):115731. doi:https://doi.org/10.1016/j.carbpol.2019.115731.
- Smith, W. C. 2010. Smart textile coatings and laminates. Great Abington Cambridge CB21 6AH, UK: Woodhead Publishing Limited.
- Sridharan, V., and N. Muthukrishnan. 2013. Optimization of machinability of polyester/modified jute fabric composite using Grey Relational analysis (GRA). Procedia Engineering 64:1003–12. doi:https://doi.org/10.1016/j.proeng.2013.09.177.
- Sun, Z., T. Yu, W. Cui, and B. Song. 2020. Importance measure method for error sources of degradation systems based on the present worth of expected Taguchi quality loss. Quality and Reliability Engineering International 36 (3):817–33. doi:https://doi.org/10.1002/qre.2581.
- Wu, Y., F. Zhou, and J. Kong. 2020. Innovative design approach for product design based on TRIZ, AD, fuzzy and Grey relational analysis. Computers & Industrial Engineering 140:106276. doi:https://doi.org/10.1016/j.cie.2020.106276.
- Yang, W. H., and Y. S. Tarng. 1998. Design optimization of cutting parameters for turning operations based on the Taguchi method. Journal of Materials Processing Technology 84 (1–3):122–29. doi:https://doi.org/10.1016/S0924-0136(98)00079-X.