References
- Adel, A. M., Z. H. A. El-Wahab, A. A. Ibrahim, and M. T. Al-Shemy. 2011. Characterization of microcrystalline cellulose prepared from lignocellulosic materials. Part II: Physicochemical properties. Carbohydrate Polymers 83 (2):676–87. doi:https://doi.org/10.1016/j.carbpol.2010.08.039.
- Alemdar, A., and M. Sain. 2008a. Biocomposites from wheat straw nanofibers: Morphology, thermal and mechanical properties. Composites Science and Technology 68 (2):557–65. doi:https://doi.org/10.1016/j.compscitech.2007.05.044.
- Alemdar, A., and M. Sain. 2008b. Isolation and characterization of nanofibers from agricultural residues–wheat straw and soy hulls. Bioresource Technology 99 (6):1664–71. doi:https://doi.org/10.1016/j.biortech.2007.04.029.
- AOAC (Association of Official Analytical Chemists). 1997. Official methods of analysis of AOAC international. In Association of official agricultural chemists, ed. P. A. Cunniff, Vol. 1, 16th ed, 1. Arlington, Virginia, USA: AOAC International. doi:https://doi.org/10.1371/journal.pone.0013135.
- Buschle-Diller, G., and S. H. Zeronian. 1992. Enhancing the reactivity and strength of cotton fibers. Journal of Applied Polymer Science 45 (6):967–79. doi:https://doi.org/10.1002/app.1992.070450604.
- Chen, M., Q. Ma, J. Y. Zhu, D. M. Alonso, and T. Runge. 2019. GVL pulping facilitates nanocellulose production from woody biomass. Green Chemistry 21 (19):5316–25. doi:https://doi.org/10.1039/C9GC01490J.
- Claramunt, J., M. Ardanuy, J. A. Garc \’\ia-Hortal, and R. D. Tolêdo Filho. 2011. The hornification of vegetable fibers to improve the durability of cement mortar composites. Cement and Concrete Composites 33 (5):586–95. doi:https://doi.org/10.1016/j.cemconcomp.2011.03.003.
- Colodette, J. L., G. Goyal, C. Yin, J. L. Gomide, and F. Tesser. 2011. Bleachability of Eucalypt kraft pulp derived from auto-hydrolyzed chips. Proceedings of International Pulp Bleaching Conference (IPBC), Portland, OR, USA.
- Coutts, R. S. P. 2005. A review of Australian research into natural fibre cement composites. Cement and Concrete Composites 27 (5):518–26. doi:https://doi.org/10.1016/j.cemconcomp.2004.09.003.
- da Correia, V. C., A. A. S. da Curvelo, K. Marabezi, A. E. F. S. de Almeida, and H. Savastano Junior. 2015. Bamboo cellulosic pulp produced by the ethanol/water process for reinforcement applications. Ciência Florestal 25 (1):127–35.
- da Costa Correia, V., V. Dos Santos, M. Sain, S. F. Santos, A. L. Leão, and H. S. Junior. 2016. Grinding process for the production of nanofibrillated cellulose based on unbleached and bleached bamboo organosolv pulp. Cellulose 23 (5):2971–87. doi:https://doi.org/10.1007/s10570-016-0996-9.
- Danielewicz, D., M. Kmiotek, and B. Surma-Ślusarska. 2019. Comparison of some properties of selected non-wood plants and wood species and unbleached kraft pulps from these materials. Journal of Natural Fibers 1–11. doi:https://doi.org/10.1080/15440478.2019.1689888.
- Ekop, I. E., K. J. Simonyan, and E. T. Evwierhoma. 2019. Utilization of cassava wastes for value added products: An overview. International Journal of Scientific Engineering and Science 3 (1):31–39.
- El Omari, H., A. Belfkira, and F. Brouillette. 2017. Paper properties of typha latifolia, pennisetum alopecuroides, and agave americana fibers and their effect as a substitute for kraft pulp fibers. Journal of Natural Fibers 14 (3):426–36. doi:https://doi.org/10.1080/15440478.2016.1212766.
- Foadieng, E., P. K. Talla, G. B. Nkamgang, and M. Fogue. 2017. Study of the thermal properties of Raffia Bamboo Vinifera L. Arecaceae. Advances in Materials Science and Engineering 2017:1–10. doi:https://doi.org/10.1155/2017/9868903.
- Gonzalez, M., L. Canton, A. Rodriguez, and J. Labidi. 2008. Effect of organosolv and soda pulping processes on the metals content of non-woody pulps. Bioresource Technology 99 (14):6621–25. doi:https://doi.org/10.1016/j.biortech.2007.12.038.
- Hosseini, S. B., S. Hedjazi, and L. Jamalirad. 2017. Investigation on physical and mechanical properties of pulp–plastic composites from bagasse. Wood Material Science & Engineering 12 (5):279–87. doi:https://doi.org/10.1080/17480272.2016.1175505.
- Islam, S. M. A., K. T. Ahmed, M. K. Manik, M. A. Wahid, and C. S. I. Kamal. 2013. A comparative study of the antioxidant, antimicrobial, cytotoxic and thrombolytic potential of the fruits and leaves of Spondias dulcis. Asian Pacific Journal of Tropical Biomedicine 3 (9):682–91. doi:https://doi.org/10.1016/S2221-1691(13)60139-2.
- Jansson, Z. L., and E. Brännvall. 2014. Effect of kraft cooking conditions on the chemical composition of the surface and bulk of spruce fibers. Journal of Wood Chemistry and Technology 34 (4):291–300. doi:https://doi.org/10.1080/02773813.2013.872661.
- Joaquim, A. P., G. H. D. Tonoli, S. F. Dos Santos, and H. Savastano Junior. 2009. Sisal organosolv pulp as reinforcement for cement based composites. Materials Research 12 (3):305–14. doi:https://doi.org/10.1590/S1516-14392009000300010.
- Jones, D., G. O. Ormondroyd, S. F. Curling, C.-M. Popescu, and M.-C. Popescu. 2017. Chemical compositions of natural fibres. In Advanced high strength natural fibre composites in construction, edited by Mizi Fan and Feng Fu, 23–58. Cambridge, England: Elsevier.
- Jonoobi, M., J. Harun, M. Mishra, and K. Oksman. 2009. Chemical composition, crystallinity and thermal degradation of bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofiber. BioResources 4 (2):626–39.
- Jonoobi, M., J. Harun, P. M. Tahir, A. Shakeri, S. SaifulAzry, and M. D. Makinejad. 2011. Physicochemical characterization of pulp and nanofibers from kenaf stem. Materials Letters 65 (7):1098–100. doi:https://doi.org/10.1016/j.matlet.2010.08.054.
- Lam, H. Q., Y. Le Bigot, M. Delmas, G. Avignon. 2004. Production of paper grade pulp from bagasse by a novel pulping process. Appita: Technology, Innovation, Manufacturing, Environment 57 (1):26.
- Leite, A. L. M. P., C. D. Zanon, and F. C. Menegalli. 2017. Isolation and characterization of cellulose nanofibers from cassava root bagasse and peelings. Carbohydrate Polymers 157:962–70. doi:https://doi.org/10.1016/j.carbpol.2016.10.048.
- Li, R., J. Fei, Y. Cai, Y. Li, J. Feng, and J. Yao. 2009. Cellulose whiskers extracted from mulberry: A novel biomass production. Carbohydrate Polymers 76 (1):94–99. doi:https://doi.org/10.1016/j.carbpol.2008.09.034.
- Małachowska, E., A. Lipkiewicz, M. Niemczyk, M. Dubowik, P. Boruszewski, and P. Przybysz. 2019. Influences of fiber and pulp properties on papermaking ability of cellulosic pulps produced from alternative fibrous raw materials. Journal of Natural Fibers 1–11. doi:https://doi.org/10.1080/15440478.2019.1697994.
- Mármol, G., J. Fiorelli, J. E. M. Ballesteros, V. Dos Santos, and M. Frías. 2017. Potential of the hornification treatment on eucalyptus and pine fibers for fiber-cement applications. Cellulose 24 (5):2275–86. doi:https://doi.org/10.1007/s10570-017-1253-6.
- Page, D. H., R. S. Seth, B. D. Jordan, and M. C. Barbe. 1985. Curl, crimps, kinks and microcompressions in pulp fibres: Their origin, measurement and significance. Papermaking Raw Materials: Transactions of the 8th Fundamental Research Symposium, 183–227. Oxford. http://www.ppfrs.org/PageSethJordanBarbe1985.pdf
- Raja, K., B. Prabu, P. Ganeshan, V. S. Chandra Sekar, and B. NagarajaGanesh. 2020. Characterization studies of natural cellulosic fibers extracted from shwetark stem. Journal of Natural Fibers 1–12. doi:https://doi.org/10.1080/15440478.2019.1710650.
- Ramezani, O., and M. M. Nazhad. 2004. The effect of coarseness on paper formation. African Pulp and Paper Week 1–5.
- Rosazley, R., M. Z. Shazana, M. A. Izzati, A. W. Fareezal, I. Rushdan, and Z. M. A. Ainun. 2016. Characterization of nanofibrillated cellulose produced from oil palm empty fruit bunch fibers (OPEFB) using ultrasound. Journal of Contemporary Issues and Thought 6:30–37.
- Rosli, W. D. W., K. N. Law, Z. Zainuddin, and R. Asro. 2004. Effect of pulping variables on the characteristics of oil-palm frond-fiber. Bioresource Technology 93 (3):233–40. doi:https://doi.org/10.1016/j.biortech.2003.11.016.
- Ruzene, D. S., and A. R. Gonçalves. 2003. Effect of dose of xylanase on bleachability of sugarcane bagasse ethanol/water pulps. In Biotechnology for fuels and chemicals, a part of Applied Biochemistry and Biotechnology book, edited by Brian H. Davison, James W. Lee, Mark Finkelstein, James D. McMillan, 769–74. USA: Springer.
- Ruzene, D. S., A. R. Gonçalves, J. A. Teixeira, and M. T. P. De Amorim. 2007. Carboxymethylcellulose obtained by ethanol/water organosolv process under acid conditions. In Applied biochemistry and biotecnology, edited by Jonathan R. Mielenz, K. Thomas Klasson, William S. Adney, and James D. McMillan, 573–82. USA: Springer.
- Segal, L., J. J. Creely, A. E. Martin Jr, and C. M. Conrad. 1959. An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Textile Research Journal 29 (10):786–94. doi:https://doi.org/10.1177/004051755902901003.
- Shamsul Alam, M., and G. M. A. Khan. 2007. Chemical analysis of okra bast fiber (Abelmoschus Esculentus) and its physico-chemical properties. Journal of Textile and Apparel, Technology and Management 5 (October 2014):1–9.
- Sillero, L., S. Barriga, N. Izaguirre, J. Labidi, and E. Robles. 2020. Fractionation of non-timber wood from Atlantic mixed forest into high-value lignocellulosic materials. Journal of Wood Chemistry and Technology 40:1–13.
- Siró, I., and D. Plackett. 2010. Microfibrillated cellulose and new nanocomposite materials: A review. Cellulose 17 (3):459–94. doi:https://doi.org/10.1007/s10570-010-9405-y.
- Sreenivasan, V. S., S. Somasundaram, D. Ravindran, V. Manikandan, and R. Narayanasamy. 2011. Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres–an exploratory investigation. Materials & Design 32 (1):453–61. doi:https://doi.org/10.1016/j.matdes.2010.06.004.
- Sun, X. F., F. Xu, R. C. Sun, P. Fowler, and M. S. Baird. 2005. Characteristics of degraded cellulose obtained from steam-exploded wheat straw. Carbohydrate Research 340 (1):97–106. doi:https://doi.org/10.1016/j.carres.2004.10.022.
- Tagne Nicodème Rodrigue, S., N. Ebénézer, N. Dieunedort, F. Didier, M. Fogue, J.-Y. Drean, and O. Harzallah. 2017. Investigation of the physical and mechanical properties of Raffia vinifera fibers along the stem. Journal of Natural Fibers 14 (5):621–33. doi:https://doi.org/10.1080/15440478.2016.1250025.
- Tagne, N. R. S., D. Ndapeu, D. Nkemaja, G. Tchemou, D. Fokwa, W. Huisken, E. Njeugna, M. Fogue, J.-Y. Drean, and O. Harzallah. 2018. Study of the viscoelastic behaviour of the Raffia vinifera fibres. Industrial Crops and Products 124:572–81. doi:https://doi.org/10.1016/j.indcrop.2018.07.077.
- Wicaksono, R., K. Syamsu, I. Yuliasih, and M. Nasir. 2013. Cellulose Nanofibers from Cassava Bagasse: Characterization and Application on Tapioca-Film. 3 (13):79–88.