References
- Ahn, H. K., M. S. Huda, M. C. Smith, W. Mulbury, W. F. Schmidt, and J. B. Reeves III. 2009. Biodegradability of injection molded bioplastic pots containing polylactic acid and poultry feather fiber. Bioresource Technology 102:4930–33. doi:https://doi.org/10.1016/j.biortech.2011.01.042.
- Ananda-Rao, V., A. Satapathy, and S. C. Mishra (2007). Polymer composites reinforced with short fibers obtained from poultry feathers. Proceeding of International and INCCOM-6 Conference Future Trends in Composite Material and Processing 530–534. Indian Institute of Technology Kanpur.
- Baba, B. O., and U. Ozmen. 2015. Preparation and mechanical characterization of chicken feather/PLA composites. Polymer Composites 38(5):837–845.
- Barone, J. R., and W. F. Schimdt. 2005. Polyethylene reinforced with keratin fibers obtained from chicken feathers. Composites Science and Technology 65:173–81. doi:https://doi.org/10.1016/j.compscitech.2004.06.011.
- Barone, J. R., W. F. Schmidt, and C. F. E. Liebner. 2005. Compounding and molding of polyethylene composites reinforced with keratin feather fiber. Composites Science and Technology 65:683–92. doi:https://doi.org/10.1016/j.compscitech.2004.09.030.
- Bessa, J., J. Souza, J. B. Lopes, J. Sampaio, C. Mota, F. Cunha, and R. Fangueiro. 2017. Characterization of thermal and acoustic insulation of chicken feather reinforced composites. Procedia Engineering 200:473–79. doi:https://doi.org/10.1016/j.proeng.2017.07.066.
- Bullions, T. A., D. Hoffman, R. A. Gillespie, J. Prince-O’Brien, and A. C. Loos. 2006. Contributions of feather fibers and various cellulose fibers to the mechanical properties of polypropylene matrix composites. Composites Science and Technology 66:102–14. doi:https://doi.org/10.1016/j.compscitech.2005.03.017.
- Castillo-Castillo, C., B. A. Salazar-Cruz, J. L. Rivera-Armenta, M. Y. Chavez-Cinco, M. L. Méndez-Hernandez, I. A. Estrada-Moreno, and T. E. Lara Ceniceros. 2018. Evaluation of elastomeric composites reinforced with chicken feathers. In Futuristic composites: behavior, characterization, and manufacturing, ed. S. S. Sidhu, P. S. Bains, R. Zitoune, and M. Yazdani, 297–318. Singapore: Springer.
- Cheng, S., K. T. Lau, T. Liu, Y. Zhao, P.-M. Lam, and Y. Tin. 2009. Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites: Part B 40:650–54. doi:https://doi.org/10.1016/j.compositesb.2009.04.011.
- Cheung, H. Y., K. T. Lau, X. M. Tao, and D. Hui. 2008. A potential material for tissue engineering. Silkworm silk/PLA biocomposite. Composites: Part B 39:1026–33. doi:https://doi.org/10.1016/j.compositesb.2007.11.009.
- Choudary, R. B., N. Naga-Krishna, and N. R. M. R. Bhargava. 2018. Study on CFF-polyester composites. Materials Today: Proceedings 5-2:8514–22.
- Choudary, R. B., and R. Nehanth. 2019. Effects of fibre content on mechanical properties of chicken feather fibre/PP composites. Materials Today; Proceedings 18:303–09. doi:https://doi.org/10.1016/j.matpr.2019.06.305.
- Colunga-Sanchez, L. M., B. A. Salazar-Cruz, J. L. Rivera-Armenta, A. B. Morales-Cepeda, and C. E. Ramos-Galvan. 2019. Evaluation of chicken feather and styrene-butadiene/chicken feather composites as modifier for asphalts binder. Applied Sciences 9:5188. doi:https://doi.org/10.3390/app9235188.
- Cuiffo, M. A., J. Snyder, A. M. Elliott, N. Romero, S. Kannan, and G. P. Halada. 2017. Impact of the fused deposition (FDM) printing process on polylactic acid (PLA) chemistry and structure. Applied Sciences 7 (6):579–94. doi:https://doi.org/10.3390/app7060579.
- Dawson, C., J. F. V. Vincent, G. Jeronimidis, G. Rice, and P. Forshaw. 1999. Heat transfer through penguin feathers. Journal of Theoretical Biology 199:291–95. doi:https://doi.org/10.1006/jtbi.1999.0959.
- De Rosa, I. M., A. Iannoni, J. M. Kenny, D. Puglia, C. Santulli, F. Sarasini, and A. Terenzi. 2011. Poly(lactic acid)/Phormium tenax composites: Morphology and thermos-mechanical behavior. Polymer Composites 32:1362–68. doi:https://doi.org/10.1002/pc.21159.
- Du, N., J. Fan, H. Wu, S. Chen, and Y. Liu. 2007. An improved model of heat transfer through penguin feathers and down. Journal of Theoretical Biology 248:727–35. doi:https://doi.org/10.1016/j.jtbi.2007.06.020.
- Faruk, O., A. K. Bledzki, H. P. Fink, and M. Sain. 2012. Biocomposites reinforced with natural fibers: 2000–2010. Progress in Polymer Science 37:1552–96. doi:https://doi.org/10.1016/j.progpolymsci.2012.04.003.
- Flores-Hernández, C. G., A. Colin-Cruz, C. Velasco-Santos, V. M. Castaño, A. Almendarez-Camarillo, I. Olivas-Armendariz, and A. L. Martinez-Hernandez. 2018a. Improving thermo-mechanical and degradation properties through chemical modification of keratin materials for reinforcing chitosan-starch films. Journal of Polymer and the Environment 26 (5):2182–91. doi:https://doi.org/10.1007/s10924-017-1115-1.
- Flores-Hernandez, C. G., A. Colin-Cruz, C. Velasco-Santos, V. M. Castaño, J. L. Rivera-Armenta, A. Almendarez-Camarillo, P. E. Garcia-Casillas, and A. L. Martinez-Hernandez. 2014. All green composites from fully renewable Biopolymers: Chitosan-starch reinforced with Keratin from feathers. Polymers 6:686–705. doi:https://doi.org/10.3390/polym6030686.
- Flores-Hernandez, C. G., A. L. Martinez-Hernandez, A. Colin-Cruz, F. Martinez-Bustos, V. M. Castaño, I. Olivas-Armendariz, A. Almendarez-Camarillo, and C. Velasco-Santos. 2018b. Starch modified with chitosan and reinforced with feather keratin materials produced by extrusion process: An alternative to starch polymers. Starch/Starke 70:1700295. doi:https://doi.org/10.1002/star.201700295.
- Gillespie JM, Frenkel MJ. 1974. The diversity of keratins. Comparative Biochemistry and Physiology, 47B: 339–346.
- Goda, K., M. S. Sreekala, A. Gomes, T. Kaji, and J. Ohgi. 2006. Improvement of plant based natural fibers for toughening green composites – Effect of load application during mercerization of ramie fibers. Composites: Part A 37:2213–20. doi:https://doi.org/10.1016/j.compositesa.2005.12.014.
- Gregorova, A., M. Hrabalova, R. Wimmer, B. Saake, and C. Altaner. 2009. Poly(lactide acid) composites reinforced with fibers obtained from different tissue types of picea sitchensis. Journal of Applied Polymer Science 114:2616–23. doi:https://doi.org/10.1002/app.30819.
- Huang, X., G. Liu, and X. Wang. 2012. New secrets of spider silk: Exceptionally high thermal conductivity and its abnormal change under stretching. Advance Materials 24:1482–86. doi:https://doi.org/10.1002/adma.201104668.
- Huda, M. S., L. T. Drzal, A. K. Mohanty, and M. Misra. 2008. Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers. Composites Science and Technology 68:424–32. doi:https://doi.org/10.1016/j.compscitech.2007.06.022.
- Huda, S., and Y. Yang. 2008. Composites from ground chicken quill and polypropylene. Composites Science and Technology 68:790–98. doi:https://doi.org/10.1016/j.compscitech.2007.08.015.
- Incropera, F. P., D. P. Dewitt, T. L. Bergman, and A. S. Lavine. 2007. Fundamentals of heat and mass transfer. John Wiley & Sons: USA.
- Jimenez-Cervantes, A. E., C. Velasco-Santos, A. L. Martinez-Hernandez, J. L. Rivera-Armenta, A. M. Mendoza-Martinez, and V. M. Castaño. 2014. Composites from chicken feathers quill and recycled polypropylene. Journal of Composite Materials 49 (3):275–83.
- Jonoobi, M., J. Harun, A. P. Mathew, and K. Oksman. 2010. Mechanical properties of cellulose nanofiber (CNF) polylactic acid (PLA) prepared by twin screw extrusion. Composites Science and Technology 70 (12):1742–47. doi:https://doi.org/10.1016/j.compscitech.2010.07.005.
- Kebebew-Debeli, D., Z. Qin, and J. Guo. 2017. Study on the pre-treatment, physical and chemical properties of ramie fibers reinforced poly(lactic acid) (PLA) biocomposite. Journal of Natural Fibers 15 (4):596–610. doi:https://doi.org/10.1080/15440478.2017.1349711.
- Kooyman, GL., Gentry, R.L., Bergman, W.P., Hammel, H.T. 1976. Heat loss in penguins during immersion and compression. Comp. Bio. and Physiol 54A:75–80.
- Le Duigou, A., M. Castro, R. Bevan, and N. Martin. 2016. 3D printing of Wood fibre biocomposites: From mechanical to actuation functionality. Materials and Design 96:106–14. doi:https://doi.org/10.1016/j.matdes.2016.02.018.
- Luo, H., G. Xiong, C. Ma, P. Chang, F. Yao, Y. Zhu, C. Zhang, and Y. Wan. 2014. Mechanical and thermos-mechanical behaviors of sizing-treated corn fiber/polylactide composites. Polymer Testing 39:45–52. doi:https://doi.org/10.1016/j.polymertesting.2014.07.014.
- Martínez-Hernandez, A. L., C. Velasco-Santos, M. de Icaza, and C. Velasco-Santos. 2007. Dynamical-mechanical and thermal analysis of polymeric composites reinforced with keratin biofibers from chicken feathers. Composites Part B 38:405–10. doi:https://doi.org/10.1016/j.compositesb.2006.06.013.
- Martinez-Hernandez, A. L., C. Velasco-Santos, M. de Icaza, and V. M. Castaño. 2005. Mechanical properties evaluation of new composites With protein biofibers reinforcing poly(methyl methacrylate. Polymer 46:8233–38. doi:https://doi.org/10.1016/j.polymer.2005.06.093.
- Menard, K. P. 1999. Dynamic mechanical analysis: a practical introduction. Boca Raton, FL.
- Mendez-Hernández, M. L., B. A. Salazar-Cruz, J. L. Rivera-Armenta, I. A. Estrada-Moreno, and Y. Chavez-Cinco. 2018. Preparation and characterization of composites from copolymer styrene-butadiene and chicken feathers. Polimeros 28-4:368–72. doi:https://doi.org/10.1590/0104-1428.08217.
- Mohammad Farsi, M. 2012. Thermoplastic matrix reinforced with natural fibers: A study on interfacial behavior. In Some critical issues for injection molding, ed. J. Wang, 225–250. Shanghai, China: InTechopen. DOI: https://doi.org/10.5772/34527.
- Moshiul-Alam, A. K. M., M. F. Mina, M. D. H. Beg, A. A. Mamun, A. K. Bledzki, and Q. T. H. Shubhra. 2014. Thermo-mechanical and morphological properties of short natural fiber reinforced poly(lactic acid) biocomposite: Effect of fiber treatment. Fibers and Polymers 15 (6):1303–09. doi:https://doi.org/10.1007/s12221-014-1303-8.
- Ozmen, U., and B. O. Baba. 2017. Thermal characterization of chicken feather/PLA biocomposites. Journal of Thermal Analysis and Calorimetry 129 (1):347–55. doi:https://doi.org/10.1007/s10973-017-6188-5.
- Pardo-Ibañez, P., A. Lopez-Rubio, M. Martinez-Sanz, L. Cabedo, and J. M. Lagaron. 2014. Keratin-polyhydroxyalkanoate melt-compounded composites with improved barrier properties of interest in food packaging applications. Journal of Applied Polymer Science 39947 (1-10):131–34.
- Pavlic, T., A. Cikic, and S. Golubic. 2016. Analysis of the influence of 3D printing on hardness of parts. Technical Gazette 23 (3):843–47.
- Singh-Manral, A.R., Gariya, N., Bansal G., Singh, H.P., Negi, P. (2020). Structural and modal analysis of chicken feather fibre (CFF) with epoxy-resin matrix composite material. Materials today: Proceedings 26(2) :2558–563.
- Sreenivasan, D. P., A. Sujith, and C. Rajesh. 2019. Cure characteristics and mechanical properties of biocomposites of natural rubber reinforced with chicken feather fibre: Effect of fibre loading, alkali treatment, bonding and vulcanizing systems. Materials Today: Communications 20:1000555.
- Sukindar, N. A., M. K. A. Ariffin, B. T. Hang-Tuah-Baharudin, C. N. A. Jaafar, and M. I. S. Ismail. 2016. Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D. Jurnal Tecknologi 10:7–15.
- Tanase, C. E., and I. Spiridon. 2014. PLA/chitosan/keratin composites for biomedical appliccations. Materials Science and Engineering C 40:242–47. doi:https://doi.org/10.1016/j.msec.2014.03.054.
- Vieira, A. C., J. C. Vieira, J. M. Ferra, F. D. Magalhaes, R. M. Guedes, and A. T. Margues. 2011. Mechanical study of PLA-PCL fibers during in vitro degradation. Journal of the Mechanical Behavior of Biomedical Materials 4:451–60. doi:https://doi.org/10.1016/j.jmbbm.2010.12.006.
- Winandy, J. E., J. H. Muehl, J. A. Micales, and A. Raina. 2003. Potential of chicken feather fibre in wood MDF composites. Proceedings Paper EcoComp 20:1–6.
- Zhu, Z., and H. Wu. 2017. Enhancement on mechanical and thermal properties of PLA biocomposites due to the addition of hybrid sisal fibers. Journal of Natural Fibers 14 (6):875–86. doi:https://doi.org/10.1080/15440478.2017.1302382.
- Zhu, Z., M. Hao, and N. Zhang. 2018. Influence of contents of the chemical compositions on the mechanical property of sisal fibers and sisal fibers reinforced PLA composites. Journal of Natural Fibers 17 (1):101–12. doi:https://doi.org/10.1080/15440478.2018.1469452.