References
- Ahmed, M. J., M. A. S. Balaji, S. S. Saravanakumar, M. R. Sanjay, and P. Senthamaraikannan. 2019. Characterization of Areva Javanica Fiber – A Possible Replacement for Synthetic Acrylic Fiber in the Disc Brake Pad. Journal of Industrial Textiles 49 (3):294–317. doi:https://doi.org/10.1177/1528083718779446.
- Akash, S., S. Avinash, and M. Ramachandra. 2018. Sciencedirect a study on mechanical properties of silk fiber reinforced epoxy resin bio-composite with sic as filler addition. Materials Today: Proceedings 5 (1):3219–28. doi:https://doi.org/10.1016/j.matpr.2018.01.131.
- Alshammari, B. A., N. Saba, M. D. Alotaibi, M. F. Alotibi, M. Jawaid, and O. Y. Alothman. 2019. Evaluation of mechanical, physical, and morphological properties of epoxy composites reinforced with different date palm fillers. Materials 12:13. doi:https://doi.org/10.3390/ma12132145.
- Anuar, H., and A. Zuraida. 2011. Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites Part B: Engineering 42 (3):462–65. doi:https://doi.org/10.1016/j.compositesb.2010.12.013.
- Arib, R. M. N., S. M. Sapuan, M. M. H. M. Ahmad, M. T. Paridah, and H. M. D. K. Zaman. 2006. Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Materials & Design 27 (5):391–96. doi:https://doi.org/10.1016/j.matdes.2004.11.009.
- Basavarajappa, S., S. Ellangovan, and K. V. Arun. 2009. Studies on dry sliding wear behaviour of graphite filled glass-epoxy composites. Materials & Design 30 (7):2670–75. doi:https://doi.org/10.1016/j.matdes.2008.10.013.
- Baur, E., K. Ruhrberg, and W. Woishnis. 2016. Chemical resistance of engineering thermoplastics. Chemical Resistance of Engineering Thermoplastics. doi:https://doi.org/10.1016/c2012-0-06186-8.
- Devadas, A., U. Nirmal, and J. Hossen. 2018. Investigation into mechanical & tribological performance of kenaf fibre particle reinforced composite. Cogent Engineering 5 (1):1–23. doi:https://doi.org/10.1080/23311916.2018.1479210.
- Ekundayo, G. 2019. Reviewing the development of natural fiber polymer composite: A case study of sisal and jute. American Journal of Mechanical and Materials Engineering 3 (1):1. doi:https://doi.org/10.11648/j.ajmme.20190301.11.
- El-Tayeb, N. S. M. 2009. Two-body abrasive behaviour of untreated SC and R-G fibres polyester composites. Wear 266 (1–2):220–32. doi:https://doi.org/10.1016/j.wear.2008.06.018.
- Gopinath, A., M. Senthil Kumar, and A. Elayaperumal. 2014. Experimental investigations on mechanical properties of jute fiber reinforced composites with polyester and epoxy resin matrices. Procedia Engineering 97:2052–63. doi:https://doi.org/10.1016/j.proeng.2014.12.448.
- Imoisili, P. E., C. M. Ibegbulam, and T. I. Adejugbe. 2012. Effect of concentration of coconut shell ash on the tensile properties of epoxy composites. The Pacific Journal of Science and Technology 13 (1):463–68.
- Indran, S., and R. Edwin Raj. 2015. Characterization of new natural cellulosic fiber from cissus quadrangularis stem. Carbohydrate Polymers 117:392–99. doi:https://doi.org/10.1016/j.carbpol.2014.09.072.
- Indran, S., R. Edwin Raj, B. S. S. Daniel, and S. S. Saravanakumar. 2016. Cellulose powder treatment on cissus quadrangularis stem fiber-reinforcement in unsaturated polyester matrix composites. Journal of Reinforced Plastics and Composites 35 (3):212–27. doi:https://doi.org/10.1177/0731684415611756.
- Indran, S., R. Edwin Raj, and V. S. Sreenivasan. 2014. Characterization of new natural cellulosic fiber from cissus quadrangularis root. Carbohydrate Polymers 110:423–29. doi:https://doi.org/10.1016/j.carbpol.2014.04.051.
- Indran, S., R. D. Edwin Raj, B. S. S. Daniel, and J. S. Binoj. 2018. “Comprehensive characterization of natural cissus quadrangularis stem fiber composites as an alternate for conventional frp composites. Journal of Bionic Engineering 15 (5):914–23. doi:https://doi.org/10.1007/s42235-018-0078-9.
- Joseph, K., S. Varghese, G. Kalaprasad, S. Thomas, L. Prasannakumari, P. Koshy, and C. Pavithran. 1996. Influence of interfacial adhesion on the mechanical properties and fracture behaviour of short sisal fibre reinforced polymer composites. European Polymer Journal 32 (10):1243–50. doi:https://doi.org/10.1016/S0014-3057(96)00051-1.
- Kaddami, H., A. Dufresne, B. Khelifi, A. Bendahou, M. Taourirte, M. Raihane, N. Issartel, H. Sautereau, J. F. Gérard, and N. Sami. 2006. Short palm tree fibers - thermoset matrices COMPosites. Composites. Part A, Applied Science and Manufacturing 37 (9):1413–22. doi:https://doi.org/10.1016/j.compositesa.2005.06.020.
- Kumar, A. A. J., and M. Prakash. 2020. Mechanical and morphological characterization of basalt/cissus quadrangularis hybrid fiber reinforced polylactic acid composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234 (14):2895–907. doi:https://doi.org/10.1177/0954406220911072.
- Kumar, S., V. K. Patel, K. K. S. Mer, B. Gangil, T. Singh, and G. Fekete. 2019. Himalayan natural fiber-reinforced epoxy composites: Effect of grewia optiva/bauhinia vahlii fibers on physico-mechanical and dry sliding wear behavior. Journal of Natural Fibers:1–11. doi:https://doi.org/10.1080/15440478.2019.1612814.
- Kumaresan, K., G. Chandramohan, M. Senthilkumar, B. Suresha, and S. Indran. 2011. Dry sliding wear behaviour of carbon fabric-reinforced epoxy composite with and without silicon carbide. Composite Interfaces 18 (6):509–26. doi:https://doi.org/10.1163/156855411X610241.
- Liu, Y., J. Xie, N. Wu, L. Wang, Y. Ma, and J. Tong. 2019b. Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites. Tribology International 131:398–405. doi:https://doi.org/10.1016/j.triboint.2018.11.004.
- Liu, Y., L. Wang, D. Liu, Y. Ma, Y. Tian, J. Tong, P. Senthamaraikannan, and S. Saravanakumar. 2019a. Evaluation of wear resistance of corn stalk fiber reinforced brake friction materials prepared by wet granulation. Wear 432–433 (February):102918. doi:https://doi.org/10.1016/j.wear.2019.05.033.
- Madhu, P., M. R. Sanjay, S. Pradeep, K. S. Bhat, and B. Yogesha. 2019. Characterization of cellulosic fibre from phoenix pusilla leaves as potential reinforcement for. Integrative Medicine Research 8 (3):2597–604. doi:https://doi.org/10.1016/j.jmrt.2019.03.006.
- Nath, S., H. Jena, and P. Deepak. 2019. Analysis of mechanical properties of jute epoxy composite with cenosphere filler. Silicon 11:659–71. doi:https://doi.org/10.1007/s12633-018-9941-x.
- Navaneethakrishnan, S., and A. Athijayamani. 2016. Mechanical properties and absorption behavior of CSP filled roselle fiber reinforced hybrid composites. Journal of Materials and Environmental Science 7 (5):1674–80.
- Oluwole, O. I., and K. L. Oluwaseun. 2017. Mechanical, abrasion and water absorption characteristics of coconut shell ash and charcoal based polyester composites. The West Indian Journal of Engineering 39 (2):65–71.
- Om, H., M. K. Gupta, R. K. Srivastava, and H. Singh. 2015. Study on the mechanical properties of epoxy composite using short sisal fibre. Materials Today: Proceedings 2 (4–5):1347–55. doi:https://doi.org/10.1016/j.matpr.2015.07.053.
- Omrani, E., P. L. Menezes, and P. K. Rohatgi. 2016. State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Engineering Science and Technology, an International Journal 19 (2):717–36. doi:https://doi.org/10.1016/j.jestch.2015.10.007.
- Peng Chang, B., H. M. Akil, R. B. Nasir, and A. Khan. 2015. Optimization on wear performance of UHMWPE composites using response surface methodology. Tribology International 88:252–62. doi:https://doi.org/10.1016/j.triboint.2015.03.028.
- Prabhu, R., M. P. Rahul, A. Aeilias, B. Sunny, J. Alok, and T. Bhat. 2017. Investigation of tribological property of coconut shell powder filled epoxy glass composites. American Journal of Materials Science 7 (5):174–84. doi:https://doi.org/10.5923/j.materials.20170705.10.
- Prasad, A. V. R., and K. Mohana Rao. 2011. Mechanical properties of natural fibre reinforced polyester composites: Jowar, Sisal and Bamboo. Materials & Design 32 (8–9):4658–63. doi:https://doi.org/10.1016/j.matdes.2011.03.015.
- Punyamurthy, R., and D. Sampathkumar. 2015. Mechanical properties of abaca fiber reinforced polypropylene composites : Effect of chemical treatment by benzenediazonium chloride. Journal of King Saud University - Engineering Sciences. doi:https://doi.org/10.1016/j.jksues.2015.10.004.
- Radhika, N., and R. Raghu. 2018. Prediction of mechanical properties and modeling on sliding wear behavior of LM25/TiC composite using response surface methodology. Particulate Science and Technology 36 (1):104–11. doi:https://doi.org/10.1080/02726351.2016.1223773.
- Rasyid, M. F. A., M. S. Salim, H. M. Akil, and Z. A. M. Ishak. 2016. Optimization of processing conditions via response surface methodology (RSM) of nonwoven flax fibre reinforced acrodur biocomposites. Procedia Chemistry 19:469–76. doi:https://doi.org/10.1016/j.proche.2016.03.040.
- Reddy, P. V., P. R. Prasad, D. M. Krishnudu, and P. Hussain. 2019. Influence of fillers on mechanical properties of prosopis juliflora fiber reinforced hybrid composites. Materials Today: Proceedings 19:384–87. doi:https://doi.org/10.1016/j.matpr.2019.07.618.
- Sanjay, M. R., P. Madhu, M. Jawaid, P. Senthamaraikannan, S. Senthil, and S. Pradeep. 2018. Characterization and properties of natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production 172. Elsevier B.V. doi:https://doi.org/10.1016/j.jclepro.2017.10.101.
- Sathishkumar, T. P., P. Navaneethakrishnan, and S. Shankar. 2012. Tensile and flexural properties of snake grass natural fiber reinforced isophthallic polyester composites. Composites Science and Technology 72 (10):1183–90. doi:https://doi.org/10.1016/j.compscitech.2012.04.001.
- Sharma, S. 2014. Tribology international parametric study of abrasive wear of Co – CrC based Fl Ame sprayed coatings by response surface methodology. Tribiology International 75:39–50. doi:https://doi.org/10.1016/j.triboint.2014.03.004.
- Sharma, V., M. L. Meena, and M. Kumar. 2020. Effect of filler percentage on physical and mechanical characteristics of basalt fiber reinforced epoxy based composites. Materials Today: Proceedings 20:2506–10. doi:https://doi.org/10.1016/j.matpr.2020.02.533.
- Shuhimi, F. F., M. F. B. Abdollah, M. A. Kalam, M. Hassan, A. Mustafa, and H. Amiruddin. 2016. Tribological characteristics comparison for oil palm fibre/epoxy and kenaf fibre/epoxy composites under dry sliding conditions. Tribology International 101:247–54. doi:https://doi.org/10.1016/j.triboint.2016.04.020.
- Sreenivasan, V. S., D. Ravindran, V. Manikandan, and R. Narayanasamy. 2011. Mechanical properties of randomly oriented short sansevieria cylindrica fibre/polyester composites. Materials & Design 32 (4):2444–55. doi:https://doi.org/10.1016/j.matdes.2010.11.042.
- Thiruchitrambalam, M., A. Athijayamani, S. Sathiyamurthy, and A. S. A. Thaheer. 2010. A review on the natural fiber-reinforced polymer composites for the development of roselle fiber-reinforced polyester composite. Journal of Natural Fibers 7 (4):307–23. doi:https://doi.org/10.1080/15440478.2010.529299.
- Venkateshwaran, N., A. ElayaPerumal, and M. S. Jagatheeshwaran. 2011. Effect of fiber length and fiber content on mechanical properties of banana fiber/epoxy composite. Journal of Reinforced Plastics and Composites. doi:https://doi.org/10.1177/0731684411426810.
- Vignesh, V., A. N. Balaji, and M. K. V. Karthikeyan. 2017. Effect of wood Sawdust filler on the mechanical properties of Indian mallow fiber yarn mat reinforced with polyester composites. International Journal of Polymer Analysis and Characterization 22 (7):610–21. doi:https://doi.org/10.1080/1023666X.2017.1356481.
- Vinod, A., R. Vijay, and D. Lenin Singaravelu. 2018. ThermoMechanical characterization of calotropis gigantea stem powder-filled jute fiber-reinforced epoxy composites. Journal of Natural Fibers 15 (5):648–57. doi:https://doi.org/10.1080/15440478.2017.1354740.