References
- Alshammari, F. Z., K. H. Saleh, B. F. Yousif, A. Alajmi, A. Shalwan, and J. G. Alotaibi. 2018. The influence of fibre orientation on tribological performance of jute fibre-reinforced epoxy composites considering different mat orientations. Tribology in Industry 40 (3):335–48. doi:https://doi.org/10.24874/ti.2018.40.03.01.
- Ashok, B., C. V. Srinivasan, and B. Basavaraj. 2018. A review on the mechanical properties of areca fiber-reinforced composites. Science and Technology of Materials 1–11. doi:https://doi.org/10.1016/j.stmat.2018.05.004.
- Ashori, A. 2006. Nonwood fibers—a potential source of raw material in papermaking. Polymer-Plastics Technology and Engineering 45 (10):1133–36. doi:https://doi.org/10.1080/03602550600728976.
- Azeez, T. O., D. O. Onukwuli, J. T. Nwabanne, and A. T. Banigo. 2018. Cissus populnea fiber–unsaturated polyester composites: Mechanical properties and interfacial adhesion. Journal of Natural Fibers. doi:https://doi.org/10.1080/15440478.2018.1558159.
- Basu, G., L. Mishra, and A. K. Samanta. 2018. Appropriate bleaching technique for coconut fiber. Journal of Natural Fibers. doi:https://doi.org/10.1080/15440478.2017.1423263.
- Binoj, J. S., R. E. Raj, V. S. Srinivasan, and G. R. Thusnavis. 2016. Morphological, physical, mechanical, chemical and thermal characterization of sustainable Indian Areca fruit husk fibers (Areca Catechu L.) as potential alternate for hazardous synthetic fibers. Journal of Bionic Engineering 13 (1):156–65. doi:https://doi.org/10.1016/S1672-6529(14)60170-0.
- Devi, L. U., S. S. Bhagawan, and S. Thomas. 2010. Dynamic mechanical analysis of pineapple leaf/glass hybrid fiber reinforced polyester composites. Polymer Composites 31 (6):956–65. doi:https://doi.org/10.1002/pc.20880.
- Dharmalingam, S., O. Meenakshisundaram, V. Elumalai, and R. S. Boopathy. 2020. An investigation on the interfacial adhesion between amine functionalized luffa fiber and epoxy resin and its effect on thermal and mechanical properties of their composites. Journal of Natural Fibers 1–16. doi:https://doi.org/10.1080/15440478.2020.1726238.
- Doroudgarian, N., L. Pupure, and R. Joffe. 2015. Moisture uptake and resulting mechanical response of bio-based composites. II. composites. Polymer Composites 1510–19. doi:https://doi.org/10.1002/pc.23058.
- George, J., S. S. Bhagawan, and S. Thomas. 1998a. Improved interactions in chemically modified pineapple leaf fiber reinforced polyethylene composites. Composite Interfaces 5 (3):201–23. doi:https://doi.org/10.1163/156855498X00153.
- George, J., S. S. Bhagawan, and S. Thomas. 1998b. Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre. Composites Science and Technology 58 (9):1471–85. doi:https://doi.org/10.1016/S0266-3538(97)00161-9.
- George, J., E. T. J. Klompen, and T. Peijs. 2001. Thermal degradation of green and upgraded flax fibres. Advanced Composites Letters 10 (2):81–88. doi:https://doi.org/10.1177/096369350101000205.
- George, J., M. S. Sreekala, and S. Thomas. 2001. A review on interface modification and characterization of natural fiber reinforced plastic composites. Polymer Engineering & Science 41 (9):1471–85. doi:https://doi.org/10.1002/pen.10846.
- George, J., M. S. Sreekala, S. Thomas, S. S. Bhagawan, and N. R. Neelakantan. 1998. Stress relaxation behavior of short pineapple fiber reinforced polyethylene composites. Journal of Reinforced Plastics and Composites 17 (7):651–72. doi:https://doi.org/10.1177/073168449801700704.
- Gokulkumar, S., P. R. Thyla, L. Prabhu, and S. Sathish. 2019. Characterization and comparative analysis on mechanical and acoustical properties of camellia sinensis/ananas comosus/glass fiber hybrid polymer composites. Journal of Natural Fibers 1–17. doi:https://doi.org/10.1080/15440478.2019.1675215.
- Hassan, M. M., M. H. Wagner, H. U. Zaman, and M. A. Khan. 2010. Physico-mechanical performance of hybrid betel nut (Areca catechu) short fiber/seaweed polypropylene composite. Journal of Natural Fibers 7 (3):165–77. doi:https://doi.org/10.1080/15440478.2010.504394.
- Hazarika, D., N. Gogoi, S. Jose, R. Das, and G. Basu. 2017. Exploration of future prospects of Indian pineapple leaf, an agro-waste for textile application. Journal of Cleaner Production 141:580–86. doi:https://doi.org/10.1016/j.jclepro.2016.09.092.
- Hazarika, S. B., S. U. Choudhury, S. S. Panja, S. K. Dolui, and B. C. Ray. 2015. Natural fiber reinforced polyester-based biocomposite: Agro-waste utilisation. Journal of Scientific and Industrial Research 74:589–94.
- Heckadka, S. S., S. Y. Nayak, T. Joe, J. Zachariah N, S. Gupta, A. Kumar N V, and M. Matuszewska. 2020. Comparative evaluation of chemical treatment on the physical and mechanical properties of areca frond, banana, and flax fibers. Journal of Natural Fibers. doi:https://doi.org/10.1080/15440478.2020.1784817.
- Hristov, V. N., S. T. Vasileva, M. Krumova, R. Lach, and G. H. Michler. 2004. Deformation mechanisms and mechanical properties of modified polypropylene/wood fiber composites. Polymer Composites 25 (5):521–26. doi:https://doi.org/10.1002/pc.20045.
- Hwang, C. L., V. A. J. Tran, W. Hong, and Y. C. Hsieh. 2016. Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites. Construction and Building Materials 127:984–92. doi:https://doi.org/10.1016/j.conbuildmat.2016.09.118.
- Kumar, M. A. 2010. Frictional coefficient, hardness, impact strength, and chemical resistance of reinforced sisal glass fiber epoxy hybrid composites. Journal of Composite Materials 44 (26):3195–202. doi:https://doi.org/10.1177/0021998310371551.
- Laftah, W. A., and W. A. W. A. Rahman. 2016. Pulping process and the potential of using non-wood pineapple leaves fiber for pulp and paper production: A review. Journal of Natural Fibers 13 (1):85–102. doi:https://doi.org/10.1080/15440478.2014.984060.
- Leão, R. M., S. M. Luz, J. A. Araujo, and K. Novack. 2015. Surface treatment of coconut fiber and its application in composite materials for reinforcement of polypropylene. Journal of Natural Fibers 12 (6):574–86. doi:https://doi.org/10.1080/15440478.2014.984048.
- Lopattananon, N., K. Panawarangkul, K. Sahakaro, and B. Ellis. 2006. Performance of pineapple leaf fiber–natural rubber composites: The effect of fiber surface treatments. Journal of Applied Polymer Science 102 (2):1974–84. doi:https://doi.org/10.1002/app.24584.
- Ma, L., S. R. Low, and J. F. Song. 2002. Comparison of Rockwell B Hardness (HRB) tests using steel and tungsten carbide ball indenters. VDI Berichte 1685:467–72.
- Maleque, M. A., A. Atiqah, R. J. Talib, and H. Zahurin. 2012. New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering 7 (2):166–70.
- Milosevic, M., P. Valášek, and A. Ruggiero. 2020. Tribology of natural fibers composite materials: An overview. Lubricants 8 (4):42. doi:https://doi.org/10.3390/lubricants8040042.
- Najeeb, M. I., M. T. H. Sultan, Y. Andou, A. U. M. Shah, K. Eksiler, M. Jawaid, and A. H. Ariffin. 2020. Characterization of lignocellulosic biomass from Malaysian’s Yankee pineapple AC6 toward composite application. Journal of Natural Fibers 1–13. doi:https://doi.org/10.1080/15440478.2019.1710655.
- Neto, A. R. S., A. M. A. Marco, M. P. B. Raiza, and S. F. Alessandra. 2015. Comparative study of 12 pineapple leaf fiber varieties for use as mechanical reinforcement in polymer composites. Industrial Crops and Products 68–78. doi:https://doi.org/10.1016/j.indcrop.2014.10.042.
- Pupure, L., N. Doroudgarian, and R. Joffe. 2014. Moisture uptake and resulting mechanical response of biobased composites. I. Constituents. Polymer Composites 1151–59. doi:https://doi.org/10.1002/pc.22762.
- Pupure, L., J. Varna, R. Joffe, F. Berthold, and A. Miettinen. 2018. Mechanical properties of natural fiber composites produced using dynamic sheet former. Wood Material Science & Engineering. doi:https://doi.org/10.1080/17480272.2018.1482368.
- Senthilkumar, K., N. Saba, M. Chandrasekar, M. Jawaid, N. Rajini, and O. Y. Alothman. 2019. Evaluation of mechanical and free vibration properties of the pineapple. Construction and Building Materials 195:423–31. doi:https://doi.org/10.1016/j.conbuildmat.2018.11.081.
- Shen, X., W. Chen, Y. Zheng, X. Lei, M. Tang, H. Wang, and F. Song. 2017. Chemical composition, antibacterial and antioxidant activities of hydrosols from different parts of Areca Catechu L. and Cocos Nucifera L. Industrial Crops and Products 110–19. doi:https://doi.org/10.1016/j.indcrop.2016.11.053.
- Shesan, O. J., A. C. Stephen, A. C. Chioma, R. Neerish, and S. E. Rotimi. 2019. Improving the mechanical properties of natural fiber composites for structural and biomedical applications. Composites from Renewable and Sustainable Materials 1–27. doi:https://doi.org/10.5772/intechopen.85252.
- Silva, E. C. N., and M. C. Walters. 2006. Modeling bamboo as a functionally graded material: Lessons for the analysis of affordable materials. Journal of Materials Science 41 (21):6991–7004. doi:https://doi.org/10.1007/s10853-006-0232-3.
- Sreekala, M. S., J. George, M. G. Kumaran, and S. Thomas. 2002. The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres. Composites Science and Technology 62 (3):339–53. doi:https://doi.org/10.1016/S0266-3538(01)00219-6.
- Srinivasan, M., C. Loganathan, V. Balasubramanian, Q. B. Nguyen, M. Gupta, and R. Narayanasamy. 2011. Feasibility of joining AZ31B magnesium metal matrix composite by friction welding. Materials & Design 32 (3):1672–76. doi:https://doi.org/10.1016/j.matdes.2010.09.028.
- Sutikno, M., P. Marwoto, and S. Rustad. 2010. The mechanical properties of carbonized coconut char. Carbon 48 (12):3616–20. doi:https://doi.org/10.1016/j.carbon.2010.06.015.
- Takamizawa, T., A. Imai, R. Sugimura, A. Tsujimoto, R. M. Ishii, T. Saito, and M. Miyazaki. 2018. Interrelation among the handling, mechanical, and wear properties of the newly developed. Journal of the Mechanical Behavior of Biomedical Materials 1–32. doi:https://doi.org/10.1016/j.jmbbm.2018.09.019.
- Vineeth, K. V., and K. S. Senthil. 2020. Characterization of various properties of chemically treated allium sativum fiber for brake pad application. Journal of Natural Fibers 1–13. doi:https://doi.org/10.1080/15440478.2020.1745130.