Enhancement of Mechanical Behavior of PLA Matrix Using Tamarind and Date Seed Micro Fillers

References

• Abbas, R. 2014. Comparative analysis of date palm culture in India and Pakistan. Daily Times (Pakistan), February 10.
   Google Scholar
• Abd El-Baky, M. A., M. Megahed, H. H. El-Saqqa, and A. E. Alshorbagy. 2019. Mechanical properties evaluation of sugarcane bagasse-glass/polyester composites. Journal of Natural Fibers. doi:10.1080/15440478.2019.1687069.
   Google Scholar
• Ameh, A. O., M. T. Isa, and I. Sanusi. 2015. Effect of particle size and concentration on the mechanical properties of polyester/date palm seed particulate composites. Leonardo Electronic Journal of Practices and Technologies 26:65–78.
   Google Scholar
• Bartkowiak-Jowsa, M., A. Kwiatkowska, R. Będziński, C. Pezowicz, J. Filipiak, B. Szaraniec, and J. Chłopek. 2014. Mechanical properties and dynamics of degradation of polylactide matrix composites with calcium and sodium alginate fibers. Journal of Composite Materials 48 (7):815–24. doi:10.1177/0021998313477897.
   Web of Science ®Google Scholar
• Bhattacharya, S., S. Bal, R. K. Mukherjee, and S. Bhattacharya. 1993. Some physical and engineering properties of tamarind (Tamarindus indica) seed. Journal of Food Engineering 18 (1):77–89. doi:10.1016/0260-8774(93)90076-V.
   Web of Science ®Google Scholar
• Bledzki, A. K., V. E. Sperber, and O. Faruk. 2002. Natural and wood fibre reinforcement in polymers 13 (8). United kingdom: iSmithers Rapra Publishing.
   Google Scholar
• Briones, R., L. Serrano, R. B. Younes, I. Mondragon, and J. Labidi. 2011. Polyol production by chemical modification of date seeds. Industrial Crops and Products 34 (1):1035–40. doi:10.1016/j.indcrop.2011.03.012.
   Web of Science ®Google Scholar
• Cardona-Uribe, N., C. Arenas-Echeverri, M. Betancur, L. Jaramillo, and J. Martínez. 2018. Possibilities of rice husk ash to be used as reinforcing filler in polymer sector-a review. Revista UIS Ingenierías 17 (1):127–42. doi:10.18273/revuin.v17n1-2018012.
   Web of Science ®Google Scholar
• Djibril, D., F. Mamadou, V. Gérard, M. D. C. Geuye, S. Oumar, and R. Luc. 2015. Physical characteristics, chemical composition and distribution of constituents of the neem seeds (Azadirachta indica A. Juss) collected in Senegal. Resarch Journal of Chemical Science 5 (7):52–58.
   Google Scholar
• Ecker, J. V., A. Haider, I. Burzic, A. Huber, G. Eder, and S. Hild. 2019. Mechanical properties and water absorption behaviour of PLA and PLA/wood composites prepared by 3D printing and injection moulding. Rapid Prototyping Journal 25 (4):672–78. doi:10.1108/RPJ-06-2018-0149.
   Web of Science ®Google Scholar
• Ejiogu, I. K., U. Ibeneme, E. Y. Ishidi, O. G. Tenebe, and M. D. Ayo. 2020. Biodegradable hybrid polymer composite reinforced with coconut shell and sweet date seed (Phoenix dactylifera) powder: A physico-mechanical study; part A. Multiscale and Multidisciplinary Modeling, Experiments and Design 3 (1):41–51. doi:10.1007/s41939-019-00060-3.
   Google Scholar
• Elkhouly, H. I., R. K. Abdel-Magied, and M. F. Aly. 2019. Date palm seed as suitable filler material in glass–epoxy composites. Iranian Polymer Journal 28 (1):65–73. doi:10.1007/s13726-018-0678-6.
   Web of Science ®Google Scholar
• Finkenstadt, V. L., C. K. Liu, R. Evangelista, L. Liu, S. C. Cermak, M. Hojilla-Evangelista, J. L. Willett, and C.-K. Liu. 2007. Poly(lactic acid) green composites using oilseed coproducts as fillers. Industrial Crops and Products 26 (1):36–43. doi:10.1016/j.indcrop.2007.01.003.
   Web of Science ®Google Scholar
• Fiore, V., L. Botta, R. Scaffaro, A. Valenza, and A. Pirrotta. 2014. PLA based biocomposites reinforced with Arundo donax fillers. Composites Science and Technology 105:110–17. doi:10.1016/j.compscitech.2014.10.005.
   Web of Science ®Google Scholar
• Franciszczak., P., J. Wojnowski, K. Kalniņš, and E. Piesowicz. 2019. The influence of matrix crystallinity on the mechanical performance of short-fibre composites–Based on homo-polypropylene and a random polypropylene copolymer reinforced with man-made cellulose and glass fibres. Composites Part B 166:516–26. doi:10.1016/j.compositesb.2019.02.046.
   Web of Science ®Google Scholar
• Graupner, N., K. Narkpiban, T. Poonsawat, P. Tooptompong, and J. Müssig. 2019. Toddy palm (borassus flabellifer) fruit fibre bundles as reinforcement in polylactide (PLA) composites: An overview about fibre and composite characteristics. Journal of Renewable Materials 7 (8):693–711. doi:10.32604/jrm.2019.06785.
   Web of Science ®Google Scholar
• Hyness, N. R. J., N. J. Vignesh, P. Senthamaraikannan, S. S. Saravanakumar, and M. R. Sanjay. 2018. Characterization of new natural cellulosic fiber from heteropogon contortus plant. Journal of Natural Fibers 15 (1):146–53. doi:10.1080/15440478.2017.1321516.
   Web of Science ®Google Scholar
• Kavitha, C., V. Hariharan, and G. Rajeshkumar. 2017. Thermogravimetric analysis of Phoenix sp. fibre. Advances in Natural and Applied Sciences 11 (8):53–59.
   Google Scholar
• Kuciel, S., K. Mazur, and M. Hebda. 2020. The Influence of wood and basalt fibres on mechanical, thermal and hydrothermal properties of PLA composites. Journal of Polymers and the Environment 28 (4):1204–15. doi:10.1007/s10924-020-01677-z.
   Web of Science ®Google Scholar
• Kumar, G. R., V. Hariharan, and S. S. Saravanakumar. 2019. Enhancing the free vibration characteristics of epoxy polymers using sustainable Phoenix Sp. Fibers and nano-clay for machine tool applications. Journal of Natural Fibers 1–8. https://doi.org/10.1080/15440478.2019.1636740
   Web of Science ®Google Scholar
• Kumar, T. S. M., N. Rajini, H. Tian, A. V. Rajulu, J. T. Winowlin Jappes, and S. Siengchin. 2017. Development and analysis of biodegradable poly (propylene carbonate)/tamarind nut powder composite films. International Journal of Polymer Analysis and Characterization 22 (5):415–23. doi:10.1080/1023666X.2017.1313483.
   Web of Science ®Google Scholar
• Mohanty, A. K., M. A. Misra, and G. I. Hinrichsen. 2000. Biofibres, biodegradable polymers and biocomposites: An overview. Macromolecular Materials and Engineering 276 (1):1–24. doi:10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W.
   Web of Science ®Google Scholar
• Mohanty, S., and S. K. Nayak. 2010. Short bamboo fiber-reinforced HDPE composites: Influence of fiber content and modification on strength of the composite. Journal of Reinforced Plastics and Composites 29 (14):2199–10. doi:10.1177/0731684409345618.
   Web of Science ®Google Scholar
• Molin, U., and A. Teder. 2002. Importance of cellulose/hemicellulose-ratio for pulp strength. Nordic Pulp and Paper Research Journal 17 (1):14–19. doi:10.3183/npprj-2002-17-01-p014-019.
   Web of Science ®Google Scholar
• Mysiukiewicz, O., M. Barczewski, K. Skórczewska, J. Szulc, and A. Kloziński. 2019. Accelerated Weathering of Polylactide-Based Composites Filled with Linseed Cake: The Influence of Time and Oil Content Within the Filler. Polymers 11, no. 9 (September 12): 1495. http://dx.doi.org/10.3390/polym11091495.
   Google Scholar
• Nagaraj, N., S. Balasubramaniam, V. Venkataraman, R. Manickam, R. Nagarajan, and I. S. Oluwarotimi. 2020. Effect of cellulosic filler loading on mechanical and thermal properties of date palm seed/vinyl ester composites. International Journal of Biological Macromolecules 147:53–66. doi:10.1016/j.ijbiomac.2019.11.247.
   PubMed Web of Science ®Google Scholar
• Nagaraja, K. C., S. Rajanna, G. S. Prakash, and G. Rajeshkumar. 2020. Improvement of mechanical and thermal properties of hybrid composites through addition of halloysite nanoclay for light weight structural applications. Journal of Industrial Textiles 152808372093662. doi:10.1177/1528083720936624.
   Google Scholar
• Nagarjun, J., J. Kanchana, and G. Rajesh Kumar. 2020. Improvement of mechanical properties of coir/epoxy composites through hybridization with sisal and palmyra palm fibers. Journal of Natural Fibers 1–10. doi:10.1080/15440478.2020.1745126.
   Google Scholar
• Naik, S., B. Halemani, and G. U. Raju. 2019. Investigation of the mechanical properties of tamarind seed particles reinforced epoxy composites. AIP Conference Proceedings 2057 (1):020023.
   Google Scholar
• Okoh, B. E., E. Osabohien, and S. H. O. Egboh. 2014. The reinforcing potentials of Velvet tamarind seed shell as filler in natural rubber compounds. International Journal of Biological and Chemical Sciences 8 (5):2367–76. doi:10.4314/ijbcs.v8i5.39.
   Google Scholar
• Rajeshkumar, G. 2020. Characterization of surface modified phoenix sp. fibers for composite reinforcement. Journal of Natural Fibers 1–12. https://doi.org/10.1080/15440478.2019.1711284
   Web of Science ®Google Scholar
• Ramamoorthy, S. K., F. Bakare, R. Herrmann, and M. Skrifvars. 2015. Performance of biocomposites from surface modified regenerated cellulose fibers and lactic acid thermoset bioresin. Cellulose 22 (4):2507–28. doi:10.1007/s10570-015-0643-x.
   Web of Science ®Google Scholar
• Rezaur Rahman, M., M. Hasan, M. Monimul Huque, and M. Nazrul Islam. 2010. Physico-mechanical properties of jute fiber reinforced polypropylene composites. Journal of Reinforced Plastics and Composites 29 (3):445–55. doi:10.1177/0731684408098008.
   Web of Science ®Google Scholar
• Shah, J. J. 2014. Date palm cultivation in India: An overview of activities. Emirates Journal of Food and Agriculture 26 (11):987–99. doi:10.9755/ejfa.v26i11.18986.
   Web of Science ®Google Scholar
• Spiegelberg, H. L. 1966. The effect of hemicelluloses on the mechanical properties of individual pulp fibers.
   Google Scholar
• Stalin, B., N. Nagaprasad, V. Vignesh, and M. Ravichandran. 2019. Evaluation of mechanical and thermal properties of tamarind seed filler reinforced vinyl ester composites. Journal of Vinyl and Additive Technology 25 (s2):E114–E128. doi:10.1002/vnl.21701.
   Google Scholar
• Vijay, R., A. Vinod, R. Kathiravan, S. Siengchin, and D. L. Singaravelu. 2020. Evaluation of Azadirachta indica seed/spent Camellia sinensis bio-filler based jute fabrics–epoxy composites: Experimental and numerical studies. Journal of Industrial Textiles 49 (9):1252–77. doi:10.1177/1528083718811086.
   Web of Science ®Google Scholar
• Yao, L., Y. Wang, Y. Li, and J. Duan. 2017. Thermal properties and crystallization behaviors of polylactide/redwood flour or bamboo fiber composites. Iranian Polymer Journal 26 (2):161–68. doi:10.1007/s13726-017-0508-2.
   Web of Science ®Google Scholar
• Zhu, Z., H. Wu, C. Ye, and W. Fu. 2017. Enhancement on mechanical and thermal properties of PLA biocomposites due to the addition of hybrid sisal fibers. Journal of Natural Fibers 14 (6):875–86. doi:10.1080/15440478.2017.1302382.
   Web of Science ®Google Scholar
• Zhu, Z., M. Hao, and N. Zhang. 2020. Influence of contents of chemical compositions on the mechanical property of sisal fibers and sisal fibers reinforced PLA composites. Journal of Natural Fibers 17 (1):101–12. doi:10.1080/15440478.2018.1469452.
   Web of Science ®Google Scholar